This is the v2 of the lantiq patches I send yesterday and today base on trunk. This was tested on a TP-Link vr200v connected to a Deutsche Telekom line. Some testes with a Danube based device would be nice.
Hauke Mehrtens (11): dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patches ltq-vdsl-app: load the vrx200 firmware or patch it lantiq: do not set default firmware file lantiq: add dsl firmware to default packages ltq-vdsl-app: make the dsl_control application stop cleanly base-files: change type of adsl and vdsl to dsl only ltq-adsl-app: sync annex option between from VDSL package ltq-vdsl-app: sync annex option between from ADSL package ltq-vdsl-app: make it possible to configure ADSL/VDSL independently ltq-vdsl-app: do not set the reserved bit 4 in the xTSE 8 base-files: print profile name in dsl lucistat package/base-files/files/bin/config_generate | 2 +- .../base-files/files/lib/functions/uci-defaults.sh | 6 +- .../lantiq/dsl-vrx200-firmware-xdsl-a/Makefile | 47 -------- .../lantiq/dsl-vrx200-firmware-xdsl-b/Makefile | 47 -------- .../lantiq/dsl-vrx200-firmware-xdsl/Makefile | 128 +++++++++++++++++++++ .../network/config/ltq-adsl-app/files/dsl_control | 5 +- .../network/config/ltq-vdsl-app/files/dsl_control | 106 ++++++++++++++++- .../linux/lantiq/base-files/etc/board.d/02_network | 2 +- .../lantiq/base-files/lib/functions/lantiq_dsl.sh | 1 + target/linux/lantiq/xrx200/profiles/lantiq.mk | 4 +- target/linux/lantiq/xrx200/profiles/tplink.mk | 6 +- 11 files changed, 242 insertions(+), 112 deletions(-) delete mode 100644 package/firmware/lantiq/dsl-vrx200-firmware-xdsl-a/Makefile delete mode 100644 package/firmware/lantiq/dsl-vrx200-firmware-xdsl-b/Makefile create mode 100644 package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile -- 2.7.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel