when qca956x uses the internal fe switch, the dummy function should be used
Signed-off-by: Weijie Gao <hackpas...@gmail.com>
---
target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index b43c80a..f292800 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -1128,7 +1128,7 @@ void __init ath79_register_eth(unsigned int id)
if (pdata->phy_if_mode == PHY_INTERFACE_MODE_SGMII)
pdata->set_speed = qca956x_set_speed_sgmii;
else
- pdata->set_speed = ath79_set_speed_ge0;
+ pdata->set_speed = ath79_set_speed_dummy;
} else {
pdata->reset_bit = QCA955X_RESET_GE1_MAC |
QCA955X_RESET_GE1_MDIO;
--
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
