UCI commands report errors in parsing coova-chilli sample configuration file. Fix this issue by using proper format in configuration.
Signed-off-by: Rajan Vaja <rajan.v...@gmail.com> --- net/coova-chilli/files/chilli.config | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/coova-chilli/files/chilli.config b/net/coova-chilli/files/chilli.config index ab8ca1f..4c037c6 100644 --- a/net/coova-chilli/files/chilli.config +++ b/net/coova-chilli/files/chilli.config @@ -89,13 +89,13 @@ config chilli # IP address of radius server 1 # For most installations you need to modify this option. - radiusserver1 rad01.chillispot.org + option radiusserver1 rad01.chillispot.org # IP address of radius server 2 # If you have only one radius server you should set radiusserver2 to the # same value as radiusserver1. # For most installations you need to modify this option. - radiusserver2 rad02.chillispot.org + option radiusserver2 rad02.chillispot.org # Radius authentication port # The UDP port number to use for radius authentication requests. @@ -154,7 +154,7 @@ config chilli # Ethernet interface to listen to. # This is the network interface which is connected to the access points. # In a typical configuration this option should be set to eth1. - dhcpif eth1 + option dhcpif eth1 # Use specified MAC address. # An address in the range 00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls @@ -171,7 +171,7 @@ config chilli # Universal access method (UAM) parameters # URL of web server handling authentication. - uamserver https://radius.chillispot.org/hotspotlogin + option uamserver https://radius.chillispot.org/hotspotlogin # URL of welcome homepage. # Unauthenticated users will be redirected to this URL. If not specified -- 1.9.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel