On 4 November 2016 at 22:23, Ben Greear <gree...@candelatech.com> wrote: > The bug appears that vlan-tx-stripping is unconditionally enabled in > at least my firmware. I have re-compiled w/out that flag set, and it > appears > to work for me. > > Please download this firmware, rename it firmware-2.bin, make sure you > remove/rename > any firmware-5.bin (etc) so mine will load, and see if that fixes your > problem.
Thanks for the fast reply but it only solves "half" the problem. Now the connection between the AP and the Sta can be secure and the driver doesn't need to be loaded in rawmode. Unfortunatly the the throughput is still bad. iperf3 -c 10.10.4.15 Connecting to host 10.10.4.15, port 5201 [ 4] local 10.10.4.16 port 44893 connected to 10.10.4.15 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.01 sec 42.4 KBytes 345 Kbits/sec 6 1.41 KBytes [ 4] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes [ 4] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes [ 4] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes [ 4] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes [ 4] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes [ 4] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes [ 4] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes [ 4] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes [ 4] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.01 sec 42.4 KBytes 34.7 Kbits/sec 9 sender [ 4] 0.00-10.01 sec 0.00 Bytes 0.00 bits/sec receiver iperf Done. > > Please note that it is very likely you will have to use same MAC address > for the VLAN devices that the underlying station uses in order for this to > work. Can you please elaborate more? My setup is the folowing. The connection between the AP and Sta is in WDS For the moment all devices are in the same VLAN. client1 --- SW1 ---- AP ...... Sta ---- SW2 --- client2 Thanks, Bruno > > https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin > > > Thanks, > Ben > > > > Ben Greear <gree...@candelatech.com> > Candela Technologies Inc http://www.candelatech.com > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
