Hi Daniel On Thu, Apr 19, 2018 at 12:52:56PM +0200, daniel wrote: > This patch breaks encrypted mesh mode.
Yes, I reverted it yesterday afternoon... > > I agree, there is still something wrong with the logic when using encrypted > mesh. Yes, and that's on my agenda for tonight (fixing /lib/netifd/wireless/mac80211.sh) > Also the setting of the mesh parameters fails, because nl80211_mesh_join must > happen before nl80211_update_mesh_config. This results in these errors: > --- > netifd: radio1 (6314): command failed: Link has been severed (-67) > --- > Originating from net/wireless/nl80211.c:nl80211_update_mesh_config():6133 > through calling in 'iw set mesh_params' at > /lib/netifd/wireless/mac80211.sh:678 > > When using mesh without encryption this is not an issue, because > 'iw mesh_join' is called before 'iw set mesh_params' > in '/lib/netifd/wireless/mac80211.sh:678 > > With encryption the setting of the parameters need to happen after > wpa_supplicant triggered nl80211_mesh_join. > > But I don't know how to solve this properly yet either... Making wpa_supplicant set the mesh parameters (it already does that, but uses non-configurable default values). I added support to at least handle mesh_fwding, because it was what I needed for my use-case, see https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=ff8df2b3f9c161edc3ab543bdbeb04a9fb45c959 Cheers Daniel > > On 04/13/2018 01:41 AM, Daniel Golle wrote: > > Unlike when operating in Ad-Hoc mode, we apparently need to pass the > > hostapd control socket interface to wpa_supplicant when using 802.11s > > mesh mode. > > > > There also seems to still be something wrong with the logic setting > > channel and (v)htmode parameters when using AP + mesh... > > > > Signed-off-by: Daniel Golle <dan...@makrotopia.org> > > --- > > package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > > b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > > index bf9d52ae42..3a1d475a5c 100644 > > --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > > +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > > @@ -633,7 +633,7 @@ mac80211_setup_vif() { > > if [ -n "$key" ]; then > > wireless_vif_parse_encryption > > freq="$(get_freq "$phy" "$channel")" > > - mac80211_setup_supplicant_noctl || failed=1 > > + mac80211_setup_supplicant || failed=1 > > else > > json_get_vars mesh_id mcast_rate > > > > > > -- > Regards > > Daniel Danzberger > embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > > _______________________________________________ > Lede-dev mailing list > lede-...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/lede-dev _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel