Switch ports 0..3 are connected to external ports LAN{1..4} in sequence, switch port 4 is not used, and switch port 5 is connected to the CPU. The WAN port is attached to the CPU's second network interface; it has no connection to the internal switch.
Reuse the "Dell TrueMobile 2300" entry, which describes the same mapping. Signed-off-by: Mirko Parthey <mirko.part...@web.de> --- This patch is an update to https://patchwork.ozlabs.org/patch/734831/ Changes since v1: * resubmit because patch was dropped from patchwork * update commit message to match similar patches * rebase on master and test again target/linux/brcm47xx/base-files/etc/board.d/01_detect | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect index 1860407..2373145 100755 --- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect +++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect @@ -139,7 +139,6 @@ detect_by_model() { ;; "Asus WL500G" | \ - "Asus WL500W" | \ "Microsoft MN-700") ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; @@ -159,6 +158,7 @@ detect_by_model() { "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" ;; + "Asus WL500W" | \ "Dell TrueMobile 2300") ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ -- 2.1.4 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.infradead.org/mailman/listinfo/openwrt-devel