From: Linus Walleij <linus.wall...@linaro.org> Date: Wed, 8 Aug 2018 14:38:55 +0200
> The totally undocumented IO mode needs to be set to enumerator > 0 to enable port 4 also known as WAN in most configurations, > for ordinary traffic. The 3 bits in the register come up as > 010 after reset, but need to be set to 000. > > The Realtek source code contains a name for these bits, but > no explanation of what the 8 different IO modes may be. > > Set it to zero for the time being and drop a comment so > people know what is going on if they run into trouble. This > "mode zero" works fine with the D-Link DIR-685 with > RTL8366RB. > > Signed-off-by: Linus Walleij <linus.wall...@linaro.org> Applied to net-next, thank you. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel