René van Dorst <opensou...@vdorst.com> writes: > Hi Bjørn, > > I was also working on this. 2 months ago. > > I also could not get 2nd GMAC to work with the external phy. > See also my last commit > https://github.com/vDorst/openwrt/commit/bf599736920cffa93ca29c455f933acdd12010ed > > But using port 5 of the switch is a good start. > This makes port usable. > > I hope that we can collaborate, I want to pick it up again. > > So that I can my Ubiquiti ER-X-SFP.
Yes, I remember seeing that. I'm afraid this is way over my head. My understanding of the MT7621 SoC and the different hardware configurations is limited. IIUC there are basically two ways to connect the 2nd CPU GMAC: 1) by RGMII to something outside the SoC 2) to a port on the SoC internal switch, similar to the 1st GMAC What I have been able to get working is 1). I have not experimented with 2). But I guess that is what you want, since the SFP is connected to the switch on the ER-X-SFP? This is probably related to the magic register settings I had to disable to get my device working. I assume the real fix is to make the driver DTRT based on the DTS. Not sure I have the correct picture of the MT7621 though. Either I am stupid or this is explained confusingly in the docs I've seen... A little of both probably. Bjørn _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
