On 27/11/2018 16:11, Tomasz Maciej Nowak wrote:
W dniu 27.11.2018 o 14:47, Lucian Cristian pisze:
On 26.11.2018 23:58, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 22:47, Lucian Cristian pisze:
On 26.11.2018 23:11, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 21:44, Lucian Cristian pisze:
On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion, late loading off the microcode can be ineffective for some
processors [2] and for others disabled [3]. Also it is discouraged for
any processor starting from Haswell and Silvermont.
Therefore this series converts the Intel microcode bundle to an initial
ram disk which is loaded with grub, so kernel has access to it as early
as possible.
Previous patch series:
https://patchwork.ozlabs.org/project/lede/list/?series=39372

1. https://lore.kernel.org/patchwork/cover/348236
2. https://lore.kernel.org/patchwork/cover/348236/#508603
3. 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=723f2828a98c8ca19842042f418fb30dd8cfc0f7
[...]
No, Your grub doesn't understand *if* command because it's old an doesn't have 
"test" module enabled. It's left there because sysupgrade doesn't upgrade grub, 
it updates only boot and root partitions. If You'll write the created image not by 
sysupgrade but by dd'ing to boot medium, It'll start properly without interruptions.
BTW thank You for the report.

error: can't find command '['.
error: can't find command '['.

Press any key to continue...



Regards


Can I repair this somehow without writing the full image ? only by reversing 
the commits ?
No, not at the moment. I'm trying to figure out best way to update grub on 
sysupgrade, until then reverting the mentioned commits will bring back old 
behavior, and no manual intervention on boot will be necessary.


shall we revert the series ?

    John


Regards


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to