On Tuesday, December 18, 2018 2:27:20 AM CET David Bauer wrote: > The NETGEAR EX61x0v2 does only validate the DNI header, neither it needs > the kernel to be a specific size nor a fake filesystem header to be > present. > > This has been tested using the NETGEAR Web-UI and the pushbutton TFTP > recovery.
I had no luck with a loaned EX6150v2 and this patch. I tried to sysupgrade from the current -snapshot to a newly compiled image with the patch applied. But sadly, the device didn't boot (power led stayed orange). I had to initiaite the tftp firmware recovery after waiting 15 minutes through the hold "Factory Reset" on boot until the light flashes green in order to get it back. Sadly, I can't really help with any bootlogs since I can't "void its warranty" :(. > Signed-off-by: David Bauer <m...@david-bauer.net> > --- > target/linux/ipq40xx/image/Makefile | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/target/linux/ipq40xx/image/Makefile > b/target/linux/ipq40xx/image/Makefile > index eaf9f68395..af953def41 100644 > --- a/target/linux/ipq40xx/image/Makefile > +++ b/target/linux/ipq40xx/image/Makefile > @@ -40,8 +40,8 @@ define Device/DniImage > NETGEAR_BOARD_ID := > NETGEAR_HW_ID := > IMAGES := factory.img sysupgrade.bin > - IMAGE/factory.img := append-kernel | pad-offset 64k 64 | > append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | > pad-rootfs | netgear-dni > - IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | > append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | > pad-rootfs | append-metadata > + IMAGE/factory.img := append-kernel | append-rootfs | pad-rootfs | > netgear-dni > + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | > append-metadata > endef > DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID > > @@ -144,7 +144,6 @@ TARGET_DEVICES += meraki_mr33 > > define Device/netgear_ex61x0v2 > $(call Device/DniImage) > - KERNEL_SIZE := 3080192 > DEVICE_DTS_CONFIG := config@4 > NETGEAR_BOARD_ID := EX6150v2series > NETGEAR_HW_ID := 29765285+16+0+128+2x2 > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel