W dniu 31.03.2019 o 14:12, Tomasz Maciej Nowak pisze: > W dniu 31.03.2019 o 00:01, Hauke Mehrtens pisze: >> On 3/28/19 5:20 PM, Tomasz Maciej Nowak wrote: >>> Add U-Boot for NVIDIA Tegra based boards, with the first being CompuLab >>> TrimSlice. This is part of initial support for this board. >>> >>> Signed-off-by: Tomasz Maciej Nowak <tome...@o2.pl> >>> --- >> >> U-Boot uses binman for tegra and binman needs swig to build. >> In mainline U-Boot sunxi, tegra and x86 are using binman for building >> and depend on swig at build time. On sunxi I patched this dependency >> out, but I do not know how we should handle this here? > > Thanks for pointing this out. Looks like tegra has already definition in > place for building without binman[1], so deleting 'select BINMAN' from > arch/arm/mach-tegra/Kconfig lets the package build without swig. > After testing on the hardware, I'll send next iteration of the patches. > >> >> "apt install swig" solves the problem for me, I do not know if we can >> easily build swig in the tools and if this would be sufficient. > > Following documentation[2] it needs libpcre, but I don't have any insight if > we can rely on host library or should provide one in tools. Anyway U-Boot is > building fine *for now* without it.
Oh wait, if it links against libpcre, that would definitely require us to provide libpcre in tools, but as mentioned swig is not required, for now. > > BTW Is there somewhere a list of packages installed on buildbots and is the > list consistent across all of them? > > 1. > http://git.denx.de/?p=u-boot.git;a=blob;f=Makefile;h=c1af9307b38e2b941d651bc316dcdf82e1bff8e6#l1363 > 2. http://swig.org/Doc4.0/Preface.html#Preface_unix_installation > >> >> Hauke >> > > Regards > Regards -- TMN _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel