[OpenWrt-Devel] [PATCH] ath79: fix OCEDO Raccoon 10Mbit PLL value

[David Bauer]

This corrects the PLL value for 10 Mbit/s links on the OCEDO Raccoon.
Prior to this patch, 10 Mbit/s links would not transmit data.

It is worth mentioning that the vendor firmware used the same PLL
settings and 10Mbit/s was also not working there.

All other link-modes are working correctly without any packet loss.

Signed-off-by: David Bauer <m...@david-bauer.net>
---
 target/linux/ath79/dts/ar9344_ocedo_raccoon.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts 
b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
index 0875c319b9..a1a912383f 100644
--- a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
+++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
@@ -169,8 +169,7 @@
 &eth0 {
        status = "okay";
 
-       /* default for ar934x, except for 1000M */
-       pll-data = <0x06000000 0x00000101 0x00001616>;
+       pll-data = <0x06000000 0x00000101 0x00001313>;
 
        mtd-mac-address = <&art 0x0>;
 
-- 
2.21.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel