The switch port naming in LuCI does not fit the physical numbers
on the front of this device. Since this is confusing, fix it.
Signed-off-by: Michael Heimpold <m...@heimpold.de>
---
target/linux/brcm47xx/base-files/etc/board.d/01_network | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_network
b/target/linux/brcm47xx/base-files/etc/board.d/01_network
index 8428b43dec..6fbd76fc10 100755
--- a/target/linux/brcm47xx/base-files/etc/board.d/01_network
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_network
@@ -143,8 +143,12 @@ configure_by_model() {
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
+ "Asus WL500GP V2")
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "5@eth0"
+ ;;
+
"Asus RT-N12"* | \
- "Asus WL500GP V2" | \
"Buffalo WHR-G125" | \
"D-Link DIR-330" | \
"Motorola WR850G" | \
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
