This patch did the following things: 1. rename device compatible string 2. add earlycon into cmdline 3. add mac address location according to mt7629 eeprom layout 4. rename mtd partitions
Signed-off-by: Chuanhong Guo <gch981...@gmail.com> --- .../files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts b/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts index f3fadd301a..17ce6046da 100644 --- a/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts +++ b/target/linux/mediatek/files-4.19/arch/arm/boot/dts/mt7629-lynx-rfb.dts @@ -10,7 +10,7 @@ / { model = "MediaTek MT7629 reference board"; - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; + compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629"; aliases { serial0 = &uart0; @@ -18,6 +18,7 @@ chosen { stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x11002000"; }; gpio-keys { @@ -75,6 +76,7 @@ gmac0: mac@0 { compatible = "mediatek,eth-mac"; reg = <0>; + mtd-mac-address = <&factory 0x2a>; phy-mode = "sgmii"; fixed-link { speed = <1000>; @@ -86,6 +88,7 @@ gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + mtd-mac-address = <&factory 0x24>; phy-handle = <&phy0>; }; @@ -153,13 +156,13 @@ }; factory: partition@70000 { - label = "Factory"; + label = "factory"; reg = <0x70000 0x40000>; read-only; }; partition@b0000 { - label = "Kernel"; + label = "firmware"; reg = <0xb0000 0xb50000>; }; }; -- 2.21.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel