Hi Andre, On Wed, Apr 8, 2020 at 9:30 AM Sergio Paracuellos <sergio.paracuel...@gmail.com> wrote: > > Hi André, > > > On Wed, Apr 8, 2020 at 9:13 AM Andre Valentin <avalen...@marcant.net> wrote: > > > > Hi Sergio! > > > > Am 08.04.20 um 06:28 schrieb Sergio Paracuellos: > > > Hi Andre, > > > > > > On Tue, Apr 7, 2020 at 9:28 PM Andre Valentin <avalen...@marcant.net> > > > wrote: > > >> > > >> Am 07.04.20 um 20:05 schrieb Sergio Paracuellos: > > >>> Hi, > > >>> > > >>> On Tue, Apr 7, 2020 at 12:16 PM Chuanhong Guo <gch981...@gmail.com> > > >>> wrote: > > >>>> > > >>>> [CC Sergio who worked on upstream PCIE driver] > > >>>> > > >>>> On Tue, Apr 7, 2020 at 4:45 PM Andre Valentin <avalen...@marcant.net> > > >>>> wrote: > > >>>>> > > >>>>> Hi! > > >>>>> > > >>>>> Currently I'm having some serious problems with the new 5.4 port. > > >>>>> 1) PCIe > > >>>>> I'm developing on the ZyXEL LTE3301-PLUS. It has PCIe and a mt7615e > > >>>>> connected to second bus on the first phy. > > >>>>> If booting the device, kernel hangs with a RST message, telling the > > >>>>> device is not detected. It seems the PCIe bus 1 > > >>>>> cannot be reseted because nothing is connected to bus 0. > > >>>>> An upport of the old PCI driver reenables the function. I can provide > > >>>>> more logs on this if needed. > > >>> > > >>> Logs and dmesg traces are always welcome and would be helpful. Both > > >>> working and not working traces. > > >> > > >> Of course, here we go with the old PCIe driver taken from 4.14 openwrt > > >> kernel: > > >> [ 0.485729] pinctrl core: add 0 pinctrl maps > > >> [ 0.485865] pull PCIe RST: RALINK_RSTCTRL = 4000000 > > >> [ 0.796015] release PCIe RST: RALINK_RSTCTRL = 7000000 > > >> [ 0.806088] ***** Xtal 40MHz ***** > > >> [ 0.812829] release PCIe RST: RALINK_RSTCTRL = 7000000 > > >> [ 0.823025] Port 0 N_FTS = 1b102800 > > >> [ 0.829933] Port 1 N_FTS = 1b105000 > > >> [ 0.836849] Port 2 N_FTS = 1b102800 > > >> [ 1.995991] PCIE0 no card, disable it(RST&CLK) > > >> [ 2.004682] PCIE2 no card, disable it(RST&CLK) > > >> [ 2.013495] -> 20107f2 > > >> [ 2.018328] PCIE1 enabled > > >> [ 2.023532] PCI host bridge /pcie@1e140000 ranges: > > >> [ 2.033045] MEM 0x0000000060000000..0x000000006fffffff > > >> [ 2.043401] IO 0x000000001e160000..0x000000001e16ffff > > >> [ 2.053762] PCI coherence region base: 0xbfbf8000, mask/settings: > > >> 0x60000000 > > >> [ 2.091056] PCI host bridge to bus 0000:00 > > >> [ 2.099131] pci_bus 0000:00: root bus resource [mem > > >> 0x60000000-0x6fffffff] > > >> [ 2.112734] pci_bus 0000:00: root bus resource [io 0xffffffff] > > >> [ 2.124486] pci_bus 0000:00: root bus resource [??? 0x00000000 flags > > >> 0x0] > > >> [ 2.137962] pci_bus 0000:00: No busn resource found for root bus, > > >> will use [bus 00-ff] > > >> [ 2.153766] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 > > >> [ 2.165651] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] > > >> [ 2.178057] pci 0000:00:00.0: reg 0x14: [mem 0x60100000-0x6010ffff] > > >> [ 2.190585] pci 0000:00:00.0: supports D1 > > >> [ 2.198439] pci 0000:00:00.0: PME# supported from D0 D1 D3hot > > >> [ 2.211463] random: fast init done > > >> [ 2.211838] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280 > > >> [ 2.230071] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff > > >> 64bit] > > >> [ 2.243675] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, > > >> limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with > > >> 5 GT/s x1 link) > > >> [ 2.272296] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to > > >> 01 > > >> [ 2.285339] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to > > >> 01 > > >> [ 2.298493] pci 0000:00:00.0: BAR 0: no space for [mem size > > >> 0x80000000] > > >> [ 2.311581] pci 0000:00:00.0: BAR 0: failed to assign [mem size > > >> 0x80000000] > > >> [ 2.325410] pci 0000:00:00.0: BAR 8: assigned [mem > > >> 0x60000000-0x600fffff] > > >> [ 2.338888] pci 0000:00:00.0: BAR 1: assigned [mem > > >> 0x60100000-0x6010ffff] > > >> [ 2.352376] pci 0000:01:00.0: BAR 0: assigned [mem > > >> 0x60000000-0x600fffff 64bit] > > >> [ 2.366887] pci 0000:00:00.0: PCI bridge to [bus 01] > > >> [ 2.376728] pci 0000:00:00.0: bridge window [mem > > >> 0x60000000-0x600fffff] > > >> > > >> > > >> And this is on 5.4 with the new driver with pcie0 status=disabled: > > >> [ 30.464407] mt7621-pci 1e140000.pcie: GPIO lookup for consumer reset > > >> [ 30.464415] mt7621-pci 1e140000.pcie: using device tree for GPIO > > >> lookup > > >> [ 30.464474] mt7621-pci 1e140000.pcie: using lookup tables for GPIO > > >> lookup > > >> [ 30.464484] mt7621-pci 1e140000.pcie: No GPIO consumer reset found > > >> [ 30.664239] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST > > >> & CLK) > > >> [ 30.678128] mt7621-pci 1e140000.pcie: Nothing is connected in virtual > > >> bridges. Exiting... > > >> booting goes on. > > >> > > >> And with pcie status=enabled: > > >> [ 32.415863] rt2880-pinmux pinctrl: pcie is already enabled > > >> [ 32.426821] mt7621-pci 1e140000.pcie: Error applying setting, reverse > > >> things back > > >> [ 32.441900] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 > > >> (dual port = 1) > > >> [ 32.456880] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 > > >> (dual port = 0) > > >> [ 32.571556] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz > > >> [ 32.582680] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz > > >> [ 32.693592] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST > > >> & CLK) > > >> hangs. > > > > > > I think the problem here is that upstream driver use two phy's nodes > > > with pcie-phy0 being a dual ported one. > > > Because there is nothing connected in pcie0 the phy is just stopped > > > assuming nothing will be connected also in pcie1. > > > Just to see if that is the problem, can you please patch the > > > 'mt7621_pcie_init_ports' function and comment the following piece of > > > code: > > > > > > if (slot != 1) > > > phy_power_off(port->phy); > > > > > > Let's see what happens. > > > > Hmm, that did the trick: > > [ 30.444228] rt2880-pinmux pinctrl: found group selector 6 for pcie > > [ 30.444249] rt2880-pinmux pinctrl: request pin 19 (io19) for > > 1e140000.pcie > > [ 30.444396] mt7621-pci 1e140000.pcie: Parsing DT failed > > [ 32.403940] rt2880-pinmux pinctrl: found group selector 6 for pcie > > [ 32.403963] rt2880-pinmux pinctrl: request pin 19 (io19) for > > 1e140000.pcie > > [ 32.403977] rt2880-pinmux pinctrl: pcie is already enabled > > [ 32.414931] mt7621-pci 1e140000.pcie: Error applying setting, reverse > > things back > > [ 32.430012] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual > > port = 1) > > [ 32.444754] mt7621-pci 1e140000.pcie: GPIO lookup for consumer reset > > [ 32.444763] mt7621-pci 1e140000.pcie: using device tree for GPIO lookup > > [ 32.444811] of_get_named_gpiod_flags: parsed 'reset-gpios' property of > > node '/pcie@1e140000[0]' - status (0) > > [ 32.444875] mt7621-pci 1e140000.pcie: GPIO lookup for consumer reset > > [ 32.444883] mt7621-pci 1e140000.pcie: using device tree for GPIO lookup > > [ 32.444906] of_get_named_gpiod_flags: can't parse 'reset-gpios' property > > of node '/pcie@1e140000[1]' > > [ 32.444924] of_get_named_gpiod_flags: can't parse 'reset-gpio' property > > of node '/pcie@1e140000[1]' > > [ 32.444935] mt7621-pci 1e140000.pcie: using lookup tables for GPIO lookup > > [ 32.444945] mt7621-pci 1e140000.pcie: No GPIO consumer reset found > > [ 32.445011] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual > > port = 0) > > [ 32.459753] mt7621-pci 1e140000.pcie: GPIO lookup for consumer reset > > [ 32.459761] mt7621-pci 1e140000.pcie: using device tree for GPIO lookup > > [ 32.459791] of_get_named_gpiod_flags: can't parse 'reset-gpios' property > > of node '/pcie@1e140000[2]' > > [ 32.459808] of_get_named_gpiod_flags: can't parse 'reset-gpio' property > > of node '/pcie@1e140000[2]' > > [ 32.459818] mt7621-pci 1e140000.pcie: using lookup tables for GPIO lookup > > [ 32.459826] mt7621-pci 1e140000.pcie: No GPIO consumer reset found > > [ 32.559695] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz > > [ 32.570819] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz > > [ 32.681732] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & > > CLK) > > [ 32.695603] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & > > CLK) > > [ 32.709477] mt7621-pci 1e140000.pcie: PCIE1 enabled > > [ 32.719207] mt7621-pci 1e140000.pcie: PCI coherence region base: > > 0x60000000, mask/settings: 0xf0000002 > > [ 32.737964] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 > > [ 32.750653] pci_bus 0000:00: root bus resource [io > > 0x1e160000-0x1e16ffff] > > [ 32.764358] pci_bus 0000:00: root bus resource [mem > > 0x60000000-0x6fffffff] > > [ 32.778073] pci_bus 0000:00: root bus resource [bus 00-ff] > > [ 32.789053] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 > > [ 32.801064] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] > > [ 32.813561] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] > > [ 32.826152] pci 0000:00:00.0: supports D1 > > [ 32.834144] pci 0000:00:00.0: PME# supported from D0 D1 D3hot > > [ 32.846953] pci 0000:00:00.0: bridge configuration invalid ([bus > > 00-00]), reconfiguring > > [ 32.863173] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280 > > [ 32.875209] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] > > [ 32.888911] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, > > limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 > > GT/s x1 link) > > [ 32.917782] pci 0000:00:00.0: PCI bridge to [bus 01-ff] > > [ 32.928208] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] > > [ 32.940355] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] > > [ 32.953890] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff > > pref] > > [ 32.968289] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 > > [ 32.981535] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] > > [ 32.994721] pci 0000:00:00.0: BAR 0: failed to assign [mem size > > 0x80000000] > > [ 33.008598] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] > > [ 33.022134] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff > > pref] > > [ 33.036535] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] > > [ 33.050082] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] > > [ 33.063622] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff > > 64bit] > > [ 33.078208] pci 0000:00:00.0: PCI bridge to [bus 01] > > [ 33.088106] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] > > [ 33.101640] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] > > [ 33.115169] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff > > pref] > > [ 45.990931] pci 0000:00:00.0: enabling device (0004 -> 0007) > > > > > > It works, yeah! But what now? Do you fix the driver? When I can help/test ..
Does something like this working also for you? diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c index f58e3a51fc71..b73fe1364701 100644 --- a/drivers/staging/mt7621-pci/pci-mt7621.c +++ b/drivers/staging/mt7621-pci/pci-mt7621.c @@ -508,12 +508,18 @@ static void mt7621_pcie_init_ports(struct mt7621_pcie *pcie) if (!mt7621_pcie_port_is_linkup(port)) { dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n", slot); - if (slot != 1) - phy_power_off(port->phy); mt7621_control_assert(port); mt7621_pcie_port_clk_disable(port); port->enabled = false; + + if (slot == 0) + continue; + + if (slot == 1 && !tmp->enabled) + phy_power_off(port->phy); + } + tmp = port; } } Thanks, Sergio Paracuellos > > > > Best regards, > Sergio Paracuellos _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel