This patch adds supports for GL-MV1000. Specification: - SOC: Marvell Armada 88F3720 (1GHz) - Flash: 16MB - RAM: 1GB DDR4 - Ethernet: 3x GE (1 WAN + 2 LAN) - EMMC: 8GB EMMC - MicroSD: 1x microSD slot - USB: 1x USB 2.0 port;1x USB 3.0 port(typec) - Button: 1x reset button - LED: 16x LEDs (3x GPIO controllable) - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND)
Signed-off-by: Li Zhang <li.zh...@gl-inet.com> --- package/boot/uboot-envtools/files/mvebu | 3 + .../linux/mvebu/base-files/etc/board.d/02_network | 3 +- .../linux/mvebu/base-files/lib/upgrade/platform.sh | 19 ++++++ .../boot/dts/marvell/armada-gl-mv1000-emmc.dts | 68 +++++++++++++++++++ .../arm64/boot/dts/marvell/armada-gl-mv1000.dts | 77 ++++++++++++++++++++++ target/linux/mvebu/image/Makefile | 15 +++++ target/linux/mvebu/image/gen_mvebu_sdcard_img.sh | 6 ++ .../mvebu/image/generic-arm64-emmc.bootscript | 12 ++++ target/linux/mvebu/image/gl-mv1000.mk | 27 ++++++++ 9 files changed, 229 insertions(+), 1 deletion(-) create mode 100644 target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts create mode 100644 target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts create mode 100644 target/linux/mvebu/image/generic-arm64-emmc.bootscript create mode 100644 target/linux/mvebu/image/gl-mv1000.mk diff --git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu index c2e746d..d37c000 100644 --- a/package/boot/uboot-envtools/files/mvebu +++ b/package/boot/uboot-envtools/files/mvebu @@ -24,6 +24,9 @@ globalscale,espressobin-v7-emmc|\ marvell,armada8040-mcbin) ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1" ;; +gl-mv1000) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1" + ;; linksys,caiman|\ linksys,cobra|\ linksys,shelby) diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network index 0881910..65f13f1 100755 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/base-files/etc/board.d/02_network @@ -18,7 +18,8 @@ cznic,turris-omnia) globalscale,espressobin|\ globalscale,espressobin-emmc|\ globalscale,espressobin-v7|\ -globalscale,espressobin-v7-emmc) +globalscale,espressobin-v7-emmc|\ +gl-mv1000) ucidef_set_interfaces_lan_wan "lan0 lan1" "wan" ;; linksys,caiman|\ diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh index 58e7d83..840eb9c 100755 --- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh @@ -19,6 +19,19 @@ platform_check_image() { esac } +platform_do_upgrade_mv1000(){ + local firmware=`fw_printenv firmware | awk -F '=' '{print $2}'` + + case "$firmware" in + gl-mv1000-emmc) + platform_do_upgrade_sdcard "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} + platform_do_upgrade() { case "$(board_name)" in linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom) @@ -28,6 +41,9 @@ platform_do_upgrade() { marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1) platform_do_upgrade_sdcard "$1" ;; + gl-mv1000) + platform_do_upgrade_mv1000 "$1" + ;; *) default_do_upgrade "$1" ;; @@ -42,5 +58,8 @@ platform_copy_config() { marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1) platform_copy_config_sdcard ;; + gl-mv1000) + platform_copy_config_sdcard + ;; esac } diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts new file mode 100644 index 0000000..9e9c547 --- /dev/null +++ b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts @@ -0,0 +1,68 @@ +/* + * Device Tree file for GL.iNet GL-MV1000 + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "GL.inet GL-MV1000 (Marvell)"; + compatible = "gl-mv1000"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0Xf0000 0x8000>; + }; + + art: partition@f8000 { + label = "art"; + reg = <0xf8000 0x8000>; + }; + + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +ð0 { + mtd-mac-address = <&art 0x0>; +}; diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts new file mode 100644 index 0000000..5c8c236 --- /dev/null +++ b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts @@ -0,0 +1,77 @@ +/* + * Device Tree file for GL.iNet GL-MV1000 + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "GL.inet GL-MV1000 (Marvell)"; + compatible = "gl-mv1000"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0Xf0000 0x8000>; + }; + + art: partition@f8000 { + label = "art"; + reg = <0xf8000 0x8000>; + }; + + partition@100000{ + label = "dtb"; + reg = <0X100000 0x10000>; + }; + + partition@110000 { + label = "firmware"; + reg = <0X110000 0xef0000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +ð0 { + mtd-mac-address = <&art 0x0>; +}; diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile index 57e5a30..d1a4b63 100644 --- a/target/linux/mvebu/image/Makefile +++ b/target/linux/mvebu/image/Makefile @@ -68,6 +68,11 @@ define Build/omnia-medkit-initramfs --file=$@ -C $(dir $(IMAGE_KERNEL))boot/ . endef +define Build/pad-dtb + (dd if=$(KDIR)/image-$(DEVICE_DTS).dtb bs=64k conv=sync;dd if=$@) > $@.new + mv $@.new $@ +endef + define Device/Default PROFILES := Default BOARD_NAME = $$(DEVICE_DTS) @@ -92,6 +97,15 @@ define Device/Default-arm64 KERNEL := kernel-bin endef +define Device/Default-arm64-emmc + BOOT_SCRIPT := generic-arm64-emmc + DTS_DIR := $(DTS_DIR)/marvell + IMAGES := emmc.img + IMAGE/emmc.img := boot-scr | boot-img-ext4 | sdcard-img-ext4 | append-metadata + KERNEL_NAME := Image + KERNEL := kernel-bin +endef + define Device/NAND-128K BLOCKSIZE := 128k PAGESIZE := 2048 @@ -112,5 +126,6 @@ endef include cortex-a9.mk include cortex-a53.mk include cortex-a72.mk +include gl-mv1000.mk $(eval $(call BuildImage)) diff --git a/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh b/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh index e0230e4..7696872 100755 --- a/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh +++ b/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh @@ -51,6 +51,12 @@ while [ "$#" -ge 3 ]; do shift; shift; shift done +model='' +model=$(echo $OUTFILE | grep "gl-mv1000-emmc") +[ "$model" != "" ] && { + ptgen_args="$ptgen_args -t 83 -p 7093504" +} + head=16 sect=63 diff --git a/target/linux/mvebu/image/generic-arm64-emmc.bootscript b/target/linux/mvebu/image/generic-arm64-emmc.bootscript new file mode 100644 index 0000000..4de4d39 --- /dev/null +++ b/target/linux/mvebu/image/generic-arm64-emmc.bootscript @@ -0,0 +1,12 @@ +setenv bootargs "root=/dev/mmcblk0p2 rw rootwait" + +if test -n "${console}"; then + setenv bootargs "${bootargs} ${console}" +fi + +setenv mmcdev 0 + +load mmc ${mmcdev}:1 ${fdt_addr} @DTB@.dtb +load mmc ${mmcdev}:1 ${kernel_addr} Image + +booti ${kernel_addr} - ${fdt_addr} diff --git a/target/linux/mvebu/image/gl-mv1000.mk b/target/linux/mvebu/image/gl-mv1000.mk new file mode 100644 index 0000000..efce4bc --- /dev/null +++ b/target/linux/mvebu/image/gl-mv1000.mk @@ -0,0 +1,27 @@ +ifeq ($(SUBTARGET),cortexa53) + +define Device/gl-mv1000 + KERNEL_NAME := Image + KERNEL_LOADADDR := 0x000080000 + KERNEL := kernel-bin | lzma | uImage lzma | pad-dtb + DEVICE_TITLE := GL.iNet GL-MV1000 + DEVICE_PACKAGES := e2fsprogs ethtool mkf2fs kmod-fs-vfat kmod-usb2 kmod-usb3 kmod-usb-storage + BLOCKSIZE := 64k + IMAGES := sysupgrade.bin + IMAGE_SIZE := 15000k + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) + DEVICE_DTS := armada-gl-mv1000 + DTS_DIR := $(DTS_DIR)/marvell +endef +TARGET_DEVICES += gl-mv1000 + +define Device/gl-mv1000-emmc + $(call Device/Default-arm64-emmc) + DEVICE_TITLE := GL.iNet GL-MV1000 EMMC + DEVICE_DTS := armada-gl-mv1000-emmc +endef + +TARGET_DEVICES += gl-mv1000-emmc + +endif + -- 2.7.4 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel