Hi Felix,
> [...]
>
> For a simple default config, you could have this:
>
> # network
> config device
option type bridge # I assume this is needed as well
> option name switch0
>
> config bridge-vlan
> option vlan 1
> option ports "lan1 lan2 lan3 lan4"
>
> config interface lan
> option ifname switch0.1
>
>
> # wireless
>
> config wifi-iface
> option network lan
>
>
> In this case, wlan0 would be added to switch0 and set to VLAN 1 untagged
> by default.
>
> If you want it on VLAN 10 tagged/PVID instead, you could do:
> option network-vlan "10:t*"
>
>
> What do you think?
I did think about it some more, also in context of a LuCI implementation and
the special role of wifi and I am convinced now that this approach generally
makes sense.
However for the vlan I wonder if we should simply use "option vid 10" since
setting anything besides an egress untagged pvid does not make sense for wifi.
So your second example above would become:
config wifi-iface
option network lan
option vid 10 # instead of inheriting vid 1, use 10 as pvid
Also, just to clarify... assuming a:
config interface foo
option ifname somevlanbridge0.456
and an wifi iface without an explicit vid override:
config wifi-iface
option network foo
... we would inherit vid 456 and set as pvid, right? Or are we are always
going to default to 1?
Regards,
Jo
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
