From: "GL.iNet-Xinfa.Deng" <xinfa.d...@gl-inet.com>

The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x04
5GHz : Mac form factory 0x04 + 1

For more information on GL-MT1300, see the OFFICIAL GL.iNet website:
https://www.gl-inet.com/products/gl-mt1300/

Signed-off-by: GL.iNet-Xinfa.Deng <xinfa.d...@gl-inet.com>
---
 .../linux/ramips/dts/mt7621_glinet_gl-mt1300.dts   | 157 +++++++++++++++++++++
 target/linux/ramips/image/mt7621.mk                |   9 ++
 .../mt7621/base-files/etc/board.d/02_network       |   1 +
 .../etc/hotplug.d/ieee80211/10_fix_wifi_mac        |   3 +
 4 files changed, 170 insertions(+)
 create mode 100644 target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts

diff --git a/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts 
b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
new file mode 100644
index 0000000..317a8f8
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc";
+       model = "GL.iNet GL-MT1300";
+
+       aliases {
+               led-boot = &led_run;
+               led-failsafe = &led_run;
+               led-running = &led_run;
+               led-upgrade = &led_run;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       palmbus: palmbus@1E000000 {
+               i2c@900 {
+                       status = "okay";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               BTN_0 {
+                       label = "BTN_0";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_run: blue {
+                       label = "gl-mt1300:blue";
+                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               };
+
+               white {
+                       label = "gl-mt1300:white";
+                       gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&sdhci {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "mx25l25635f", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x1fb0000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0>;
+               mtd-mac-address = <&factory 0x0004>;
+       };
+};
+
+&gmac0 {
+       mtd-mac-address = <&factory 0x4000>;
+};
+
+&switch0 {
+       ports {
+               port@2 {
+                       status = "okay";
+                       label = "lan1";
+                       mtd-mac-address = <&factory 0x4000>;
+                       mtd-mac-address-increment = <1>;
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan2";
+                       mtd-mac-address = <&factory 0x4000>;
+                       mtd-mac-address-increment = <1>;
+               };
+               wan: port@4 {
+                       status = "okay";
+                       label = "wan";
+                       mtd-mac-address = <&factory 0x4000>;
+               };
+       };
+};
+
+&uartlite3 {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+                       ralink,function = "gpio";
+               };
+       };
+};
diff --git a/target/linux/ramips/image/mt7621.mk 
b/target/linux/ramips/image/mt7621.mk
index fad1855..615a55a 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -475,6 +475,15 @@ define Device/gehua_ghl-r-001
 endef
 TARGET_DEVICES += gehua_ghl-r-001
 
+define Device/glinet_gl-mt1300
+  $(Device/dsa-migration)
+  IMAGE_SIZE :=32448k
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MT1300
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
 define Device/gnubee_gb-pc1
   $(Device/dsa-migration)
   DEVICE_VENDOR := GnuBee
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network 
b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index c5b3514..bca4cc2 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
+       glinet,gl-mt1300|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
        xiaomi,mi-router-3g|\
diff --git 
a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac 
b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b7a41f0..49b61a5 100644
--- 
a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ 
b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -10,6 +10,9 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
+       glinet,gl-mt1300)
+               [ "$PHYNBR" = "1" ] && macaddr_add "$(mtd_get_mac_binary 
factory 0x04)" 1 > /sys${DEVPATH}/macaddress
+               ;;
        linksys,ea7300-v1|\
        linksys,ea7300-v2|\
        linksys,ea7500-v2)
-- 
2.7.4




_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to