This fixes the build problems for the REALTEK target by adding a proper configuration option for the phy module.
Signed-off-by: Birger Koblitz <m...@birger-koblitz.de| --- diff --git a/target/linux/realtek/config-5.4 b/target/linux/realtek/config-5.4 index 170bcb7632..2176a2cf50 100644 --- a/target/linux/realtek/config-5.4 +++ b/target/linux/realtek/config-5.4 @@ -71,6 +71,7 @@ CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y CONFIG_GPIO_RTL8231=y CONFIG_GPIO_RTL838X=y +CONFIG_REALTEK_SOC_PHY=y CONFIG_GRO_CELLS=y CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDWARE_WATCHPOINTS=y diff --git a/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch index 826891abe1..91b66ec4cd 100644 --- a/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch +++ b/target/linux/realtek/patches-5.4/705-add-rtl-phy.patch @@ -1,11 +1,25 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -454,6 +454,12 @@ + ---help--- + Supports the Realtek 821x PHY. + ++config REALTEK_SOC_PHY ++ tristate "Realtek SoC PHYs" ++ depends on RTL838X ++ ---help--- ++ Supports the PHYs found in combination with Realtek Switch SoCs ++ + config RENESAS_PHY + tristate "Driver for Renesas PHYs" + ---help--- --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -101,7 +101,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o - obj-$(CONFIG_NATIONAL_PHY) += national.o +@@ -87,6 +87,7 @@ obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o --obj-$(CONFIG_REALTEK_PHY) += realtek.o -+obj-$(CONFIG_REALTEK_PHY) += realtek.o rtl83xx-phy.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o ++obj-$(CONFIG_REALTEK_SOC_PHY) += rtl83xx-phy.o obj-$(CONFIG_RENESAS_PHY) += uPD60620.o obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o obj-$(CONFIG_SMSC_PHY) += smsc.o _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
