"Adrian Schmutzler" <m...@adrianschmutzler.de> writes: > Feel free to submit new patches for the remaining stuff if you desire.
One simple thing to fix for the GS1900-xxx is the ability to upgrade to OpenWrt from the stock web UI, without using the console at all. But this requires changing to the device specific magic, since the stock web UI verifies this before accepting an image. It would be good to know where to move with the u-image mtdsplitter before submitting more of those patches. Should I prepare a minimalistic new splitter using DT and leave the existing ones as is? Or should we just continue like before, constantly adding new magic numbers to the code? Note that there hopefully will be a large number of vendors and devices supported by the realtek target. The potentional is almost unlimited, with a whole new 10gig and multigig generation (RTL93xx) being within reach. And the Realtek SDK has made most (all) vendors use some non-standard magic. So we might end up with a lot of churn and new entries in the u-image splitter, bloating it for everyone. Fine with me if that's what you want. But if you don't, then that decision should be made now. Bjørn _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel