This sets the DTS paths automatically based on their device definition name. Devices where this is not possible may still be served by simply overwriting DEVICE_DTS in their respective definition.
Cc: Rafał Miłecki <ra...@milecki.pl> Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de> --- Of course, any paths which are not static may be moved from DTS_DIR to the DEVICE_DTS line. (Note that this will break anything that would depend on DTS_DIR _without_ DEVICE_DTS following it. (Didn't spot anything yet.)) --- target/linux/bcm4908/image/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/target/linux/bcm4908/image/Makefile b/target/linux/bcm4908/image/Makefile index f5db38915d..bf30c5c867 100644 --- a/target/linux/bcm4908/image/Makefile +++ b/target/linux/bcm4908/image/Makefile @@ -13,6 +13,8 @@ define Build/bcm4908kernel mv $@.new $@ endef +DTS_DIR := $(DTS_DIR)/broadcom/bcm4908 + define Device/Default KERNEL := kernel-bin | bcm4908lzma | bcm4908kernel KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) @@ -20,23 +22,24 @@ define Device/Default KERNEL_INITRAMFS := kernel-bin | bcm4908lzma | bcm4908kernel FILESYSTEMS := squashfs KERNEL_NAME := Image + DEVICE_DTS = $$(SOC)-$(subst _,-,$(1)) IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2) BLOCKSIZE := 128k PAGESIZE := 2048 endef define Device/asus_gt-ac5300 + SOC := bcm4908 DEVICE_VENDOR := Asus DEVICE_MODEL := GT-AC5300 - DEVICE_DTS := broadcom/bcm4908/bcm4908-asus-gt-ac5300 IMAGES := bin endef TARGET_DEVICES += asus_gt-ac5300 define Device/netgear_r8000p + SOC := bcm4906 DEVICE_VENDOR := Netgear DEVICE_MODEL := R8000P - DEVICE_DTS := broadcom/bcm4908/bcm4906-netgear-r8000p IMAGES := bin endef TARGET_DEVICES += netgear_r8000p -- 2.20.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel