On 2021-02-15 11:19, John Crispin wrote: > Signed-off-by: John Crispin <j...@phrozen.org> > --- > .../files/lib/netifd/wireless/mac80211.sh | 193 +++++++++++++++++- > .../mac80211/files/lib/wifi/mac80211.sh | 19 +- > 2 files changed, 195 insertions(+), 17 deletions(-) > > diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > index 92c56afd24..b717770d5e 100644 > --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh > @@ -56,6 +56,13 @@ drv_mac80211_init_device_config() { [...] > +mac80211_get_seg0() { > + local ht_mode="$1" > + local seg0=0 > + > + case "$ht_mode" in > + 40) > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; then > + case "$(( ($channel / 4) % 2 ))" in > + 1) seg0=$(($channel - 2));; > + 0) seg0=$(($channel + 2));; > + esac > + elif [ $freq != 5935 ]; then > + case "$(( ($channel / 4) % 2 ))" in > + 1) seg0=$(($channel + 2));; > + 0) seg0=$(($channel - 2));; > + esac > + fi > + ;; > + 80) > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; then > + case "$(( ($channel / 4) % 4 ))" in > + 0) seg0=$(($channel + 6));; > + 1) seg0=$(($channel + 2));; > + 2) seg0=$(($channel - 2));; > + 3) seg0=$(($channel - 6));; > + esac > + elif [ $freq != 5935 ]; then > + case "$(( ($channel / 4) % 4 ))" in > + 1) seg0=$(($channel + 6));; > + 2) seg0=$(($channel + 2));; > + 3) seg0=$(($channel - 2));; > + 0) seg0=$(($channel - 6));; > + esac > + fi > + ;; > + 160) > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; then > + case "$channel" in > + 1|5|9|13|17|21|25|29) seg0=15;; > + 33|37|41|45|49|53|57|61) seg0=47;; > + 65|69|73|77|81|85|89|93) seg0=79;; > + 97|101|105|109|113|117|121|125) > seg0=111;; > + 129|133|137|141|145|149|153|157) > seg0=143;; > + 161|165|169|173|177|181|185|189) > seg0=175;; > + 193|197|201|205|209|213|217|221) > seg0=207;; > + esac > + elif [ $freq != 5935 ]; then > + case "$channel" in > + 36|40|44|48|52|56|60|64) seg0=50;; > + 100|104|108|112|116|120|124|128) > seg0=114;; > + esac > + fi > + ;; > + esac > + printf "$seg0" > +} This function duplicates the seg0 that's already done for VHT+HE and simply adds some extra conditions for 6 GHz. Those extra conditions should be folded into the existing code.
> + > mac80211_hostapd_setup_base() { > local phy="$1" > > @@ -333,20 +412,105 @@ mac80211_hostapd_setup_base() { > # 802.11ax > enable_ax=0 > case "$htmode" in > - HE*) enable_ax=1 ;; > + HE20) enable_ax=1 > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; then > + append base_cfg "op_class=131" "$N" > + fi > + ;; > + HE40) > + enable_ax=1 > + idx="$(mac80211_get_seg0 "40")" > + if [ $freq -ge 5180 ] && [ $freq != 5935 ]; then > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; > then > + append base_cfg "op_class=132" "$N" > + fi > + append base_cfg "he_oper_chwidth=0" "$N" > + append base_cfg > "he_oper_centr_freq_seg0_idx=$idx" "$N" > + fi > + ;; > + HE80) > + enable_ax=1 > + idx="$(mac80211_get_seg0 "80")" > + if [ $freq != 5935 ]; then > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; > then > + append base_cfg "op_class=133" "$N" > + fi > + append base_cfg "he_oper_chwidth=1" "$N" > + append base_cfg > "he_oper_centr_freq_seg0_idx=$idx" "$N" > + fi > + ;; > + HE160) > + enable_ax=1 > + idx="$(mac80211_get_seg0 "160")" > + if [ $freq != 5935 ]; then > + if [ $freq -gt 5950 ] && [ $freq -le 7115 ]; > then > + append base_cfg "op_class=134" "$N" > + fi > + append base_cfg "he_oper_chwidth=2" "$N" > + append base_cfg > "he_oper_centr_freq_seg0_idx=$idx" "$N" > + fi > + ;; > esac Please remove this chunk entirely and replace it with a simple extra case/esac for adding op_class. he_oper_chwidth and he_oper_centr_freq_seg0_idx is already handled elsewhere. [...] > @@ -401,6 +565,7 @@ mac80211_get_addr() { > > mac80211_generate_mac() { > local phy="$1" > + local multiple_bssid="$2" > local id="${macidx:-0}" > > local ref="$(cat /sys/class/ieee80211/${phy}/macaddress)" > @@ -425,6 +590,11 @@ mac80211_generate_mac() { > > local oIFS="$IFS"; IFS=":"; set -- $ref; IFS="$oIFS" > > + [ "$multiple_bssid" -eq 1 ] && { > + printf "02:%s:%s:%s:%s:%02x" $b1 $2 $3 $4 $5 $macidx This looks wrong to me. first byte should be: b0 = orig_b0 | 0x2 b5 = orig_b5 & ~mac_mask | mac_idx mac_mask should be set based on the number of mbssid entries to leave enough room for macidx. - Felix _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel