As suggested by Sergio, this adds GPIOs 19 and 8 explicitly into the DIR-860L DTS, so the PCI-E ports get reset and the N radio (radio1) on PCI-E port 1 comes up reliably.
Fixes the following error that popped up in dmesg: [ 1.638942] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) Suggested-by: Sergio Paracuellos <sergio.paracuel...@gmail.com> Signed-off-by: Stijn Segers <f...@volatilesystems.org> --- target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts index 5d1c336736..f843f62801 100644 --- a/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts +++ b/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts @@ -143,6 +143,9 @@ &pcie { status = "okay"; + + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>, + <&gpio 8 GPIO_ACTIVE_LOW>; }; &pcie0 { -- 2.30.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel