Hi, On 2/18/21 6:16 PM, Adrian Schmutzler wrote: > Hi, > >> -----Original Message----- >> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] >> On Behalf Of David Bauer >> Sent: Dienstag, 16. Februar 2021 23:48 >> To: openwrt-devel@lists.openwrt.org >> Subject: [PATCH] mpc85xx-p1010: add Kernel 5.10 support > > no offense, but I wonder whether bumping by subtargets is really the way to > go here?
I'd rater bump a subtarget for which i at least know a board boots with the patches than bump the complete target and break 2/3 subtargets in the process. Best wishes David > > Best > > Adrian > >> >> Tested on: Sophos RED 15W >> >> The TP-Link WL-WDR4900 needs to be disabled when 5.10 becomes the >> default kernel. >> >> When building with all kmods enabled, the resulting kernel image exceeds >> the maximum size the bootloader reads from the flash. >> >> For more information, see GitHub issue #1773 >> >> Signed-off-by: David Bauer <m...@david-bauer.net> >> --- >> target/linux/mpc85xx/config-5.10 | 280 ++++++++++++++++++ >> target/linux/mpc85xx/p1010/target.mk | 2 + >> ...85xx-add-gpio-keys-to-of-match-table.patch | 10 + ...0-powerpc-85xx-tl- >> wdr4900-v1-support.patch | 83 ++++++ .../101-powerpc-85xx-hiveap-330- >> support.patch | 30 ++ >> .../102-powerpc-add-cmdline-override.patch | 37 +++ >> .../103-powerpc-85xx-red-15w-rev1.patch | 29 ++ >> ...change-P2020RDB-dts-file-for-OpenWRT.patch | 162 ++++++++++ >> .../105-powerpc-85xx-panda-support.patch | 30 ++ >> .../106-powerpc-85xx-ws-ap3710i-support.patch | 30 ++ ...ootwrapper- >> disable-uImage-generation.patch | 42 +++ >> 11 files changed, 735 insertions(+) >> create mode 100644 target/linux/mpc85xx/config-5.10 create mode 100644 >> target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of- >> match-table.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/100-powerpc-85xx- >> tl-wdr4900-v1-support.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/101-powerpc-85xx- >> hiveap-330-support.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/102-powerpc-add- >> cmdline-override.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/103-powerpc-85xx- >> red-15w-rev1.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/104-powerpc- >> mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/105-powerpc-85xx- >> panda-support.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/106-powerpc-85xx- >> ws-ap3710i-support.patch >> create mode 100644 target/linux/mpc85xx/patches-5.10/900-powerpc- >> bootwrapper-disable-uImage-generation.patch >> >> diff --git a/target/linux/mpc85xx/config-5.10 b/target/linux/mpc85xx/config- >> 5.10 >> new file mode 100644 >> index 0000000000..cb0d08ba91 >> --- /dev/null >> +++ b/target/linux/mpc85xx/config-5.10 >> @@ -0,0 +1,280 @@ >> +# CONFIG_40x is not set >> +# CONFIG_44x is not set >> +# CONFIG_ADVANCED_OPTIONS is not set >> +CONFIG_AR8216_PHY=y >> +CONFIG_AR8216_PHY_LEDS=y >> +CONFIG_ARCH_32BIT_OFF_T=y >> +CONFIG_ARCH_HIBERNATION_POSSIBLE=y >> +CONFIG_ARCH_KEEP_MEMBLOCK=y >> +CONFIG_ARCH_MAY_HAVE_PC_FDC=y >> +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y >> +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y >> +CONFIG_ARCH_MMAP_RND_BITS=11 >> +CONFIG_ARCH_MMAP_RND_BITS_MAX=17 >> +CONFIG_ARCH_MMAP_RND_BITS_MIN=11 >> +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 >> +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 >> +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y >> +CONFIG_ARCH_SUSPEND_POSSIBLE=y >> +CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y >> +CONFIG_ASN1=y >> +CONFIG_AUDIT_ARCH=y >> +CONFIG_BLK_MQ_PCI=y >> +CONFIG_BOOKE=y >> +CONFIG_BOOKE_WDT=y >> +# CONFIG_BSC9131_RDB is not set >> +# CONFIG_BSC9132_QDS is not set >> +# CONFIG_C293_PCIE is not set >> +CONFIG_CLONE_BACKWARDS=y >> +CONFIG_CLZ_TAB=y >> +CONFIG_CMDLINE="console=ttyS0,115200" >> +CONFIG_CMDLINE_FROM_BOOTLOADER=y >> +# CONFIG_CMDLINE_OVERRIDE is not set >> +# CONFIG_COMMON_CLK is not set >> +CONFIG_COMPAT_32BIT_TIME=y >> +# CONFIG_CORENET_GENERIC is not set >> +# CONFIG_CPM2 is not set >> +CONFIG_CPU_BIG_ENDIAN=y >> +CONFIG_CRYPTO_AEAD=y >> +CONFIG_CRYPTO_AEAD2=y >> +# CONFIG_CRYPTO_AES_PPC_SPE is not set >> +CONFIG_CRYPTO_AKCIPHER=y >> +CONFIG_CRYPTO_AKCIPHER2=y >> +CONFIG_CRYPTO_AUTHENC=y >> +CONFIG_CRYPTO_HASH=y >> +CONFIG_CRYPTO_HASH2=y >> +CONFIG_CRYPTO_HW=y >> +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 >> +CONFIG_CRYPTO_MANAGER=y >> +CONFIG_CRYPTO_MANAGER2=y >> +# CONFIG_CRYPTO_MD5_PPC is not set >> +CONFIG_CRYPTO_NULL=y >> +CONFIG_CRYPTO_NULL2=y >> +CONFIG_CRYPTO_RNG=y >> +CONFIG_CRYPTO_RNG2=y >> +CONFIG_CRYPTO_RSA=y >> +# CONFIG_CRYPTO_SHA1_PPC is not set >> +# CONFIG_CRYPTO_SHA1_PPC_SPE is not set # >> CONFIG_CRYPTO_SHA256_PPC_SPE >> +is not set >> +CONFIG_DATA_SHIFT=12 >> +CONFIG_DEBUG_BUGVERBOSE=y >> +CONFIG_DNOTIFY=y >> +CONFIG_DTC=y >> +# CONFIG_E200 is not set >> +CONFIG_E500=y >> +# CONFIG_E5500_CPU is not set >> +# CONFIG_E6500_CPU is not set >> +CONFIG_EARLY_PRINTK=y >> +CONFIG_EDAC_ATOMIC_SCRUB=y >> +CONFIG_EDAC_SUPPORT=y >> +CONFIG_ENABLE_MUST_CHECK=y >> +CONFIG_FIXED_PHY=y >> +CONFIG_FSL_BOOKE=y >> +CONFIG_FSL_EMB_PERFMON=y >> +# CONFIG_FSL_ENETC_MDIO is not set >> +# CONFIG_FSL_FMAN is not set >> +CONFIG_FSL_LBC=y >> +CONFIG_FSL_PCI=y >> +CONFIG_FSL_PQ_MDIO=y >> +CONFIG_FSL_SOC=y >> +CONFIG_FSL_SOC_BOOKE=y >> +CONFIG_FW_LOADER_PAGED_BUF=y >> +CONFIG_GENERIC_ALLOCATOR=y >> +CONFIG_GENERIC_ATOMIC64=y >> +CONFIG_GENERIC_BUG=y >> +CONFIG_GENERIC_CLOCKEVENTS=y >> +CONFIG_GENERIC_CMOS_UPDATE=y >> +CONFIG_GENERIC_CPU=y >> +CONFIG_GENERIC_CPU_AUTOPROBE=y >> +CONFIG_GENERIC_CPU_VULNERABILITIES=y >> +CONFIG_GENERIC_EARLY_IOREMAP=y >> +CONFIG_GENERIC_IRQ_SHOW=y >> +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y >> +CONFIG_GENERIC_ISA_DMA=y >> +CONFIG_GENERIC_PCI_IOMAP=y >> +CONFIG_GENERIC_SMP_IDLE_THREAD=y >> +CONFIG_GENERIC_STRNCPY_FROM_USER=y >> +CONFIG_GENERIC_STRNLEN_USER=y >> +CONFIG_GENERIC_TIME_VSYSCALL=y >> +CONFIG_GEN_RTC=y >> +# CONFIG_GE_IMP3A is not set >> +CONFIG_GIANFAR=y >> +CONFIG_GPIOLIB=y >> +CONFIG_GPIO_GENERIC=y >> +CONFIG_GPIO_MPC8XXX=y >> +CONFIG_HAS_DMA=y >> +CONFIG_HAS_IOMEM=y >> +CONFIG_HAS_IOPORT_MAP=y >> +# CONFIG_HIVEAP_330 is not set >> +CONFIG_HW_RANDOM=y >> +# CONFIG_HW_RANDOM_XIPHERA is not set >> +CONFIG_HZ=250 >> +CONFIG_HZ_250=y >> +CONFIG_HZ_PERIODIC=y >> +CONFIG_I2C=y >> +CONFIG_I2C_BOARDINFO=y >> +CONFIG_I2C_MPC=y >> +CONFIG_ILLEGAL_POINTER_VALUE=0 >> +CONFIG_INITRAMFS_SOURCE="" >> +CONFIG_IRQCHIP=y >> +CONFIG_IRQ_DOMAIN=y >> +CONFIG_IRQ_FORCED_THREADING=y >> +CONFIG_IRQ_WORK=y >> +CONFIG_ISA_DMA_API=y >> +CONFIG_KERNEL_START=0xc0000000 >> +# CONFIG_KSI8560 is not set >> +CONFIG_LEGACY_PTYS=y >> +CONFIG_LEGACY_PTY_COUNT=256 >> +CONFIG_LIBFDT=y >> +CONFIG_LLD_VERSION=0 >> +CONFIG_LOCK_DEBUGGING_SUPPORT=y >> +CONFIG_LOWMEM_CAM_NUM=3 >> +CONFIG_LOWMEM_SIZE=0x30000000 >> +CONFIG_LXT_PHY=y >> +# CONFIG_MATH_EMULATION is not set >> +CONFIG_MDIO_BUS=y >> +CONFIG_MDIO_DEVICE=y >> +CONFIG_MEMFD_CREATE=y >> +# CONFIG_MFD_ROHM_BD71828 is not set >> +CONFIG_MIGRATION=y >> +CONFIG_MMU_GATHER_PAGE_SIZE=y >> +CONFIG_MODULES_USE_ELF_RELA=y >> +# CONFIG_MPC8536_DS is not set >> +# CONFIG_MPC8540_ADS is not set >> +# CONFIG_MPC8560_ADS is not set >> +# CONFIG_MPC85xx_CDS is not set >> +# CONFIG_MPC85xx_DS is not set >> +# CONFIG_MPC85xx_MDS is not set >> +# CONFIG_MPC85xx_RDB is not set >> +CONFIG_MPIC=y >> +# CONFIG_MPIC_MSGR is not set >> +CONFIG_MPIC_TIMER=y >> +CONFIG_MPILIB=y >> +# CONFIG_MTD_CFI is not set >> +CONFIG_MTD_NAND_CORE=y >> +CONFIG_MTD_NAND_ECC=y >> +CONFIG_MTD_NAND_ECC_SW_HAMMING=y >> +CONFIG_MTD_RAW_NAND=y >> +CONFIG_MTD_SPI_NOR=y >> +# CONFIG_MVME2500 is not set >> +CONFIG_NEED_PER_CPU_KM=y >> +CONFIG_NEED_SG_DMA_LENGTH=y >> +CONFIG_NLS=y >> +CONFIG_NR_IRQS=512 >> +CONFIG_NVMEM=y >> +CONFIG_OF=y >> +CONFIG_OF_ADDRESS=y >> +CONFIG_OF_DMA_DEFAULT_COHERENT=y >> +CONFIG_OF_EARLY_FLATTREE=y >> +CONFIG_OF_FLATTREE=y >> +CONFIG_OF_GPIO=y >> +CONFIG_OF_IRQ=y >> +CONFIG_OF_KOBJ=y >> +CONFIG_OF_MDIO=y >> +CONFIG_OF_NET=y >> +CONFIG_OLD_SIGACTION=y >> +CONFIG_OLD_SIGSUSPEND=y >> +# CONFIG_P1010_RDB is not set >> +# CONFIG_P1022_DS is not set >> +# CONFIG_P1022_RDK is not set >> +# CONFIG_P1023_RDB is not set >> +CONFIG_PAGE_OFFSET=0xc0000000 >> +# CONFIG_PANDA is not set >> +CONFIG_PCI=y >> +CONFIG_PCIEAER=y >> +CONFIG_PCIEASPM=y >> +CONFIG_PCIEASPM_DEFAULT=y >> +# CONFIG_PCIEASPM_PERFORMANCE is not set # >> CONFIG_PCIEASPM_POWERSAVE is >> +not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set >> +CONFIG_PCIEPORTBUS=y CONFIG_PCI_DOMAINS=y >> +CONFIG_PGTABLE_LEVELS=2 >> +CONFIG_PHYLIB=y >> +CONFIG_PHYSICAL_ALIGN=0x04000000 >> +CONFIG_PHYSICAL_START=0x00000000 >> +# CONFIG_PHYS_64BIT is not set >> +# CONFIG_PMU_SYSFS is not set >> +# CONFIG_PPA8548 is not set >> +CONFIG_PPC=y >> +CONFIG_PPC32=y >> +# CONFIG_PPC64 is not set >> +CONFIG_PPC_85xx=y >> +# CONFIG_PPC_8xx is not set >> +CONFIG_PPC_ADV_DEBUG_DACS=2 >> +CONFIG_PPC_ADV_DEBUG_DVCS=0 >> +CONFIG_PPC_ADV_DEBUG_IACS=2 >> +CONFIG_PPC_ADV_DEBUG_REGS=y >> +CONFIG_PPC_BARRIER_NOSPEC=y >> +CONFIG_PPC_BOOK3E_MMU=y >> +# CONFIG_PPC_BOOK3S_6xx is not set >> +CONFIG_PPC_DOORBELL=y >> +# CONFIG_PPC_E500MC is not set >> +# CONFIG_PPC_EARLY_DEBUG is not set >> +CONFIG_PPC_FSL_BOOK3E=y >> +CONFIG_PPC_INDIRECT_PCI=y >> +# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set >> CONFIG_PPC_MMU_NOHASH=y >> +CONFIG_PPC_MMU_NOHASH_32=y >> +CONFIG_PPC_PAGE_SHIFT=12 >> +# CONFIG_PPC_PTDUMP is not set >> +# CONFIG_PPC_QEMU_E500 is not set >> +CONFIG_PPC_SMP_MUXED_IPI=y >> +CONFIG_PPC_UDBG_16550=y >> +CONFIG_PPC_WERROR=y >> +CONFIG_QE_GPIO=y >> +CONFIG_QUICC_ENGINE=y >> +CONFIG_RAS=y >> +# CONFIG_RED_15W_REV1 is not set >> +CONFIG_RTC_CLASS=y >> +CONFIG_RTC_DRV_GENERIC=y >> +# CONFIG_RTC_DRV_RV3032 is not set >> +CONFIG_RTC_I2C_AND_SPI=y >> +CONFIG_RTC_MC146818_LIB=y >> +# CONFIG_SBC8548 is not set >> +# CONFIG_SCOM_DEBUGFS is not set >> +CONFIG_SERIAL_8250_EXTENDED=y >> +CONFIG_SERIAL_8250_FSL=y >> +CONFIG_SERIAL_8250_SHARE_IRQ=y >> +CONFIG_SERIAL_MCTRL_GPIO=y >> +CONFIG_SERIAL_OF_PLATFORM=y >> +# CONFIG_SERIAL_QE is not set >> +# CONFIG_SOCRATES is not set >> +CONFIG_SPARSE_IRQ=y >> +CONFIG_SPE=y >> +CONFIG_SPE_POSSIBLE=y >> +CONFIG_SPI=y >> +CONFIG_SPI_FSL_ESPI=y >> +CONFIG_SPI_MASTER=y >> +CONFIG_SPI_MEM=y >> +CONFIG_SRCU=y >> +# CONFIG_STRIP_ASM_SYMS is not set >> +# CONFIG_STX_GP3 is not set >> +CONFIG_SWCONFIG=y >> +CONFIG_SWPHY=y >> +CONFIG_SYSCTL_EXCEPTION_TRACE=y >> +CONFIG_TASK_SIZE=0xc0000000 >> +CONFIG_THREAD_INFO_IN_TASK=y >> +CONFIG_THREAD_SHIFT=13 >> +CONFIG_TICK_CPU_ACCOUNTING=y >> +CONFIG_TINY_SRCU=y >> +# CONFIG_TL_WDR4900_V1 is not set >> +# CONFIG_TQM8540 is not set >> +# CONFIG_TQM8541 is not set >> +# CONFIG_TQM8548 is not set >> +# CONFIG_TQM8555 is not set >> +# CONFIG_TQM8560 is not set >> +# CONFIG_TWR_P102x is not set >> +CONFIG_UCC=y >> +CONFIG_UCC_FAST=y >> +CONFIG_UCC_GETH=y >> +# CONFIG_UGETH_TX_ON_DEMAND is not set >> +CONFIG_USB_SUPPORT=y >> +CONFIG_VDSO32=y >> +# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set >> +CONFIG_VM_EVENT_COUNTERS=y CONFIG_WATCHDOG_CORE=y # >> CONFIG_WS_AP3710I >> +is not set # CONFIG_XES_MPC85xx is not set CONFIG_XZ_DEC_BCJ=y >> +CONFIG_XZ_DEC_POWERPC=y >> diff --git a/target/linux/mpc85xx/p1010/target.mk >> b/target/linux/mpc85xx/p1010/target.mk >> index 12ed78ace1..1140a325b6 100644 >> --- a/target/linux/mpc85xx/p1010/target.mk >> +++ b/target/linux/mpc85xx/p1010/target.mk >> @@ -2,6 +2,8 @@ BOARDNAME:=P1010 >> FEATURES+=nand >> KERNELNAME:=simpleImage.tl-wdr4900-v1 >> >> +KERNEL_TESTING_PATCHVER:=5.10 >> + >> define Target/Description >> Build firmware images for P1010 based boards. >> endef >> diff --git a/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio- >> keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-5.10/001- >> powerpc-85xx-add-gpio-keys-to-of-match-table.patch >> new file mode 100644 >> index 0000000000..5e5ab10daf >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio- >> keys-t >> +++ o-of-match-table.patch >> @@ -0,0 +1,10 @@ >> +--- a/arch/powerpc/platforms/85xx/common.c >> ++++ b/arch/powerpc/platforms/85xx/common.c >> +@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx >> + { .compatible = "fsl,mpc8548-guts", }, >> + /* Probably unnecessary? */ >> + { .compatible = "gpio-leds", }, >> ++ { .compatible = "gpio-keys", }, >> + /* For all PCI controllers */ >> + { .compatible = "fsl,mpc8540-pci", }, >> + { .compatible = "fsl,mpc8548-pcie", }, >> diff --git a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl- >> wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.10/100- >> powerpc-85xx-tl-wdr4900-v1-support.patch >> new file mode 100644 >> index 0000000000..4da431ec23 >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1- >> s >> +++ upport.patch >> @@ -0,0 +1,83 @@ >> +From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 >> 2001 >> +From: Gabor Juhos <juh...@openwrt.org> >> +Date: Wed, 20 Feb 2013 08:40:33 +0100 >> +Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 >> +v1 board >> + >> +This patch adds support for the TP-Link TL-WDR4900 v1 concurrent >> +dual-band wireless router. The devices uses the Freescale P1014 SoC. >> + >> +Signed-off-by: Gabor Juhos <juh...@openwrt.org> >> +Signed-off-by: Pawel Dembicki <paweldembi...@gmail.com> >> +--- >> + arch/powerpc/boot/Makefile | 3 ++- >> + arch/powerpc/boot/wrapper | 5 +++++ >> + arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++ >> +arch/powerpc/platforms/85xx/Makefile | 1 + >> + 4 files changed, 20 insertions(+), 1 deletion(-) >> + >> +--- a/arch/powerpc/boot/Makefile >> ++++ b/arch/powerpc/boot/Makefile >> +@@ -157,6 +157,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie >> + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S >> + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S >> + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c >> ++src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S >> + >> + src-wlib := $(sort $(src-wlib-y)) >> + src-plat := $(sort $(src-plat-y)) >> +@@ -336,7 +337,7 @@ image-$(CONFIG_TQM8555) += >> cuImage.tqm >> + image-$(CONFIG_TQM8560) += cuImage.tqm8560 >> + image-$(CONFIG_SBC8548) += cuImage.sbc8548 >> + image-$(CONFIG_KSI8560) += cuImage.ksi8560 >> +- >> ++image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl- >> wdr4900-v1 >> + # Board ports in arch/powerpc/platform/86xx/Kconfig >> + image-$(CONFIG_MVME7100) += dtbImage.mvme7100 >> + >> +--- a/arch/powerpc/boot/wrapper >> ++++ b/arch/powerpc/boot/wrapper >> +@@ -324,6 +324,11 @@ adder875-redboot) >> + platformo="$object/fixed-head.o $object/redboot-8xx.o" >> + binary=y >> + ;; >> ++simpleboot-tl-wdr4900-v1) >> ++ platformo="$object/fixed-head.o $object/simpleboot.o" >> ++ link_address='0x1000000' >> ++ binary=y >> ++ ;; >> + simpleboot-*) >> + platformo="$object/fixed-head.o $object/simpleboot.o" >> + binary=y >> +--- a/arch/powerpc/platforms/85xx/Kconfig >> ++++ b/arch/powerpc/platforms/85xx/Kconfig >> +@@ -170,6 +170,18 @@ config STX_GP3 >> + select CPM2 >> + select DEFAULT_UIMAGE >> + >> ++config TL_WDR4900_V1 >> ++ bool "TP-Link TL-WDR4900 v1" >> ++ select DEFAULT_UIMAGE >> ++ select ARCH_REQUIRE_GPIOLIB >> ++ select GPIO_MPC8XXX >> ++ select SWIOTLB >> ++ help >> ++ This option enables support for the TP-Link TL-WDR4900 v1 board. >> ++ >> ++ This board is a Concurrent Dual-Band wireless router with a >> ++ Freescale P1014 SoC. >> ++ >> + config TQM8540 >> + bool "TQ Components TQM8540" >> + help >> +--- a/arch/powerpc/platforms/85xx/Makefile >> ++++ b/arch/powerpc/platforms/85xx/Makefile >> +@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren >> + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o >> + obj-$(CONFIG_STX_GP3) += stx_gp3.o >> + obj-$(CONFIG_TQM85xx) += tqm85xx.o >> ++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o >> + obj-$(CONFIG_SBC8548) += sbc8548.o >> + obj-$(CONFIG_PPA8548) += ppa8548.o >> + obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o >> diff --git a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap- >> 330-support.patch b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx- >> hiveap-330-support.patch >> new file mode 100644 >> index 0000000000..34568398c2 >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330- >> supp >> +++ ort.patch >> @@ -0,0 +1,30 @@ >> +--- a/arch/powerpc/platforms/85xx/Kconfig >> ++++ b/arch/powerpc/platforms/85xx/Kconfig >> +@@ -49,6 +49,17 @@ config BSC9132_QDS >> + and dual StarCore SC3850 DSP cores. >> + Manufacturer : Freescale Semiconductor, Inc >> + >> ++config HIVEAP_330 >> ++ bool "Aerohive HiveAP-330" >> ++ select DEFAULT_UIMAGE >> ++ select ARCH_REQUIRE_GPIOLIB >> ++ select GPIO_MPC8XXX >> ++ help >> ++ This option enables support for the Aerohive HiveAP-330 board. >> ++ >> ++ This board is a Concurrent Dual-Band wireless access point with a >> ++ Freescale P1020 SoC. >> ++ >> + config MPC8540_ADS >> + bool "Freescale MPC8540 ADS" >> + select DEFAULT_UIMAGE >> +--- a/arch/powerpc/platforms/85xx/Makefile >> ++++ b/arch/powerpc/platforms/85xx/Makefile >> +@@ -10,6 +10,7 @@ obj-y += common.o >> + obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o >> + obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o >> + obj-$(CONFIG_C293_PCIE) += c293pcie.o >> ++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o >> + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o >> + obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o >> + obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o >> diff --git a/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline- >> override.patch b/target/linux/mpc85xx/patches-5.10/102-powerpc-add- >> cmdline-override.patch >> new file mode 100644 >> index 0000000000..924ce9307e >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline- >> override >> +++ .patch >> @@ -0,0 +1,37 @@ >> +--- a/arch/powerpc/Kconfig >> ++++ b/arch/powerpc/Kconfig >> +@@ -885,6 +885,14 @@ config CMDLINE_FORCE >> + This is useful if you cannot or don't want to change the >> + command-line options your boot loader passes to the kernel. >> + >> ++config CMDLINE_OVERRIDE >> ++ bool "Use alternative cmdline from device tree" >> ++ help >> ++ Some bootloaders may have uneditable bootargs. While >> CMDLINE_FORCE can >> ++ be used, this is not a good option for kernels that are shared across >> ++ devices. This setting enables using "chosen/cmdline-override" as the >> ++ cmdline if it exists in the device tree. >> ++ >> + config EXTRA_TARGETS >> + string "Additional default image types" >> + help >> +--- a/drivers/of/fdt.c >> ++++ b/drivers/of/fdt.c >> +@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns >> + if (p != NULL && l > 0) >> + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); >> + >> ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different >> ++ * device tree option of chosen/bootargs-override. This is >> ++ * helpful on boards where u-boot sets bootargs, and is unable >> ++ * to be modified. >> ++ */ >> ++#ifdef CONFIG_CMDLINE_OVERRIDE >> ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); >> ++ if (p != NULL && l > 0) >> ++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); #endif >> ++ >> + /* >> + * CONFIG_CMDLINE is meant to be a default in case nothing else >> + * managed to set the command line, unless >> CONFIG_CMDLINE_FORCE >> diff --git a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w- >> rev1.patch b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red- >> 15w-rev1.patch >> new file mode 100644 >> index 0000000000..b84a56659c >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w- >> rev1.pa >> +++ tch >> @@ -0,0 +1,29 @@ >> +--- a/arch/powerpc/platforms/85xx/Kconfig >> ++++ b/arch/powerpc/platforms/85xx/Kconfig >> +@@ -173,6 +173,16 @@ config XES_MPC85xx >> + Manufacturer: Extreme Engineering Solutions, Inc. >> + URL: <http://www.xes-inc.com/> >> + >> ++config RED_15W_REV1 >> ++ bool "Sophos RED 15w Rev.1" >> ++ select DEFAULT_UIMAGE >> ++ select ARCH_REQUIRE_GPIOLIB >> ++ select GPIO_MPC8XXX >> ++ help >> ++ This option enables support for the Sophos RED 15w Rev.1 board. >> ++ >> ++ This board is a wireless VPN router with a Freescale P1010 SoC. >> ++ >> + config STX_GP3 >> + bool "Silicon Turnkey Express GP3" >> + help >> +--- a/arch/powerpc/platforms/85xx/Makefile >> ++++ b/arch/powerpc/platforms/85xx/Makefile >> +@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o >> + obj-$(CONFIG_TWR_P102x) += twr_p102x.o >> + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o >> + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o >> ++obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o >> + obj-$(CONFIG_STX_GP3) += stx_gp3.o >> + obj-$(CONFIG_TQM85xx) += tqm85xx.o >> + obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o >> diff --git a/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx- >> change-P2020RDB-dts-file-for-OpenWRT.patch >> b/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change- >> P2020RDB-dts-file-for-OpenWRT.patch >> new file mode 100644 >> index 0000000000..a22f251077 >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change- >> P2020 >> +++ RDB-dts-file-for-OpenWRT.patch >> @@ -0,0 +1,162 @@ >> +From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 >> 2001 >> +From: Pawel Dembicki <paweldembi...@gmail.com> >> +Date: Sun, 30 Dec 2018 23:24:41 +0100 >> +Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for >> OpenWRT >> + >> +This patch apply chages for OpenWRT in P2020RDB dts file. >> + >> +Signed-off-by: Pawel Dembicki <paweldembi...@gmail.com> >> +--- >> + arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++-------- >> - >> + 1 file changed, 63 insertions(+), 35 deletions(-) >> + >> +--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts >> ++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts >> +@@ -5,10 +5,15 @@ >> + * Copyright 2009-2012 Freescale Semiconductor Inc. >> + */ >> + >> ++/dts-v1/; >> ++ >> + /include/ "p2020si-pre.dtsi" >> + >> ++#include <dt-bindings/gpio/gpio.h> >> ++#include <dt-bindings/input/input.h> >> ++ >> + / { >> +- model = "fsl,P2020RDB"; >> ++ model = "Freescale P2020RDB"; >> + compatible = "fsl,P2020RDB"; >> + >> + aliases { >> +@@ -34,48 +39,38 @@ >> + 0x2 0x0 0x0 0xffb00000 0x00020000>; >> + >> + nor@0,0 { >> +- #address-cells = <1>; >> +- #size-cells = <1>; >> + compatible = "cfi-flash"; >> + reg = <0x0 0x0 0x1000000>; >> + bank-width = <2>; >> + device-width = <1>; >> + >> +- partition@0 { >> +- /* This location must not be altered */ >> +- /* 256KB for Vitesse 7385 Switch firmware */ >> +- reg = <0x0 0x00040000>; >> +- label = "NOR (RO) Vitesse-7385 Firmware"; >> +- read-only; >> +- }; >> +- >> +- partition@40000 { >> +- /* 256KB for DTB Image */ >> +- reg = <0x00040000 0x00040000>; >> +- label = "NOR (RO) DTB Image"; >> +- read-only; >> +- }; >> ++ partitions { >> ++ compatible = "fixed-partitions"; >> ++ #address-cells = <1>; >> ++ #size-cells = <1>; >> + >> +- partition@80000 { >> +- /* 3.5 MB for Linux Kernel Image */ >> +- reg = <0x00080000 0x00380000>; >> +- label = "NOR (RO) Linux Kernel Image"; >> +- read-only; >> +- }; >> ++ partition@0 { >> ++ /* This location must not be altered >> */ >> ++ /* 256KB for Vitesse 7385 Switch >> firmware */ >> ++ reg = <0x0 0x00040000>; >> ++ label = "NOR (RO) Vitesse-7385 >> Firmware"; >> ++ read-only; >> ++ }; >> + >> +- partition@400000 { >> +- /* 11MB for JFFS2 based Root file System */ >> +- reg = <0x00400000 0x00b00000>; >> +- label = "NOR (RW) JFFS2 Root File System"; >> +- }; >> ++ partition@40000 { >> ++ compatible = "denx,fit"; >> ++ reg = <0x00040000 0x00ec0000>; >> ++ label = "firmware"; >> ++ }; >> + >> +- partition@f00000 { >> +- /* This location must not be altered */ >> +- /* 512KB for u-boot Bootloader Image */ >> +- /* 512KB for u-boot Environment Variables */ >> +- reg = <0x00f00000 0x00100000>; >> +- label = "NOR (RO) U-Boot Image"; >> +- read-only; >> ++ partition@f00000 { >> ++ /* This location must not be altered >> */ >> ++ /* 512KB for u-boot Bootloader Image >> */ >> ++ /* 512KB for u-boot Environment >> Variables */ >> ++ reg = <0x00f00000 0x00100000>; >> ++ label = "u-boot"; >> ++ read-only; >> ++ }; >> + }; >> + }; >> + >> +@@ -140,13 +135,43 @@ >> + soc: soc@ffe00000 { >> + ranges = <0x0 0x0 0xffe00000 0x100000>; >> + >> ++ gpio0: gpio-controller@fc00 { >> ++ }; >> ++ >> + i2c@3000 { >> ++ temperature-sensor@4c { >> ++ compatible = "adi,adt7461"; >> ++ reg = <0x4c>; >> ++ }; >> ++ >> ++ eeprom@50 { >> ++ compatible = "atmel,24c256"; >> ++ reg = <0x50>; >> ++ }; >> ++ >> + rtc@68 { >> + compatible = "dallas,ds1339"; >> + reg = <0x68>; >> + }; >> + }; >> + >> ++ i2c@3100 { >> ++ pmic@11 { >> ++ compatible = "zl2006"; >> ++ reg = <0x11>; >> ++ }; >> ++ >> ++ gpio@18 { >> ++ compatible = "nxp,pca9557"; >> ++ reg = <0x18>; >> ++ }; >> ++ >> ++ eeprom@52 { >> ++ compatible = "atmel,24c01"; >> ++ reg = <0x52>; >> ++ }; >> ++ }; >> ++ >> + spi@7000 { >> + flash@0 { >> + #address-cells = <1>; >> +@@ -200,10 +225,12 @@ >> + phy0: ethernet-phy@0 { >> + interrupts = <3 1 0 0>; >> + reg = <0x0>; >> ++ reset-gpios = <&gpio0 14 >> GPIO_ACTIVE_LOW>; >> + }; >> + phy1: ethernet-phy@1 { >> + interrupts = <3 1 0 0>; >> + reg = <0x1>; >> ++ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; >> + }; >> + tbi-phy@2 { >> + device_type = "tbi-phy"; >> diff --git a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda- >> support.patch b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx- >> panda-support.patch >> new file mode 100644 >> index 0000000000..a08bc302f2 >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda- >> support.p >> +++ atch >> @@ -0,0 +1,30 @@ >> +--- a/arch/powerpc/platforms/85xx/Kconfig >> ++++ b/arch/powerpc/platforms/85xx/Kconfig >> +@@ -60,6 +60,17 @@ config HIVEAP_330 >> + This board is a Concurrent Dual-Band wireless access point with a >> + Freescale P1020 SoC. >> + >> ++config PANDA >> ++ bool "OCEDO PANDA" >> ++ select DEFAULT_UIMAGE >> ++ select ARCH_REQUIRE_GPIOLIB >> ++ select GPIO_MPC8XXX >> ++ help >> ++ This option enables support for the OCEDO PANDA board. >> ++ >> ++ This board is a Concurrent Dual-Band wireless access point with a >> ++ Freescale P1020 SoC. >> ++ >> + config MPC8540_ADS >> + bool "Freescale MPC8540 ADS" >> + select DEFAULT_UIMAGE >> +--- a/arch/powerpc/platforms/85xx/Makefile >> ++++ b/arch/powerpc/platforms/85xx/Makefile >> +@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o >> + obj-$(CONFIG_P1022_DS) += p1022_ds.o >> + obj-$(CONFIG_P1022_RDK) += p1022_rdk.o >> + obj-$(CONFIG_P1023_RDB) += p1023_rdb.o >> ++obj-$(CONFIG_PANDA) += panda.o >> + obj-$(CONFIG_TWR_P102x) += twr_p102x.o >> + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o >> + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o >> diff --git a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws- >> ap3710i-support.patch b/target/linux/mpc85xx/patches-5.10/106-powerpc- >> 85xx-ws-ap3710i-support.patch >> new file mode 100644 >> index 0000000000..4bacedbcd7 >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i- >> supp >> +++ ort.patch >> @@ -0,0 +1,30 @@ >> +--- a/arch/powerpc/platforms/85xx/Kconfig >> ++++ b/arch/powerpc/platforms/85xx/Kconfig >> +@@ -71,6 +71,17 @@ config PANDA >> + This board is a Concurrent Dual-Band wireless access point with a >> + Freescale P1020 SoC. >> + >> ++config WS_AP3710I >> ++ bool "Enterasys WS-AP3710i" >> ++ select DEFAULT_UIMAGE >> ++ select ARCH_REQUIRE_GPIOLIB >> ++ select GPIO_MPC8XXX >> ++ help >> ++ This option enables support for the Enterasys WS-AP3710i board. >> ++ >> ++ This board is a Concurrent Dual-Band wireless access point with a >> ++ Freescale P1020 SoC. >> ++ >> + config MPC8540_ADS >> + bool "Freescale MPC8540 ADS" >> + select DEFAULT_UIMAGE >> +--- a/arch/powerpc/platforms/85xx/Makefile >> ++++ b/arch/powerpc/platforms/85xx/Makefile >> +@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o >> + obj-$(CONFIG_P1023_RDB) += p1023_rdb.o >> + obj-$(CONFIG_PANDA) += panda.o >> + obj-$(CONFIG_TWR_P102x) += twr_p102x.o >> ++obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o >> + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o >> + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o >> + obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o >> diff --git a/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper- >> disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.10/900- >> powerpc-bootwrapper-disable-uImage-generation.patch >> new file mode 100644 >> index 0000000000..2ba3f83326 >> --- /dev/null >> +++ b/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper- >> disable- >> +++ uImage-generation.patch >> @@ -0,0 +1,42 @@ >> +From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 >> 2001 >> +From: David Bauer <m...@david-bauer.net> >> +Date: Sat, 29 Feb 2020 14:27:04 +0100 >> +Subject: [PATCH] powerpc: bootwrapper: disable uImage generation >> + >> +Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to instruct >> +the mkimage to use the xz compression, which isn't supported. This >> +disables the uImage generation, as OpenWrt generates individual uImages >> +for each board using it's own toolchain. >> + >> +Signed-off-by: David Bauer <m...@david-bauer.net> >> +--- >> + arch/powerpc/boot/Makefile | 9 --------- >> + 1 file changed, 9 deletions(-) >> + >> +--- a/arch/powerpc/boot/Makefile >> ++++ b/arch/powerpc/boot/Makefile >> +@@ -264,7 +264,6 @@ image-$(CONFIG_PPC_CHRP) += >> zImage.chrp >> + image-$(CONFIG_PPC_EFIKA) += zImage.chrp >> + image-$(CONFIG_PPC_PMAC) += zImage.pmac >> + image-$(CONFIG_PPC_HOLLY) += dtbImage.holly >> +-image-$(CONFIG_DEFAULT_UIMAGE) += uImage >> + image-$(CONFIG_EPAPR_BOOT) += zImage.epapr >> + >> + # >> +@@ -395,15 +394,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits >> + $(obj)/vmlinux.strip: vmlinux >> + $(STRIP) -s -R .comment $< -o $@ >> + >> +-$(obj)/uImage: vmlinux $(wrapperbits) FORCE >> +- $(call if_changed,wrap,uboot) >> +- >> +-$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE >> +- $(call if_changed,wrap,uboot- >> $*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) >> +- >> +-$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE >> +- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) >> +- >> + $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE >> + $(call >> +if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) >> + >> -- >> 2.30.1 >> >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel