Hello, Michael
Yes, you are right.
As you figured out, I built my current image several months ago,
and now need to build one new to reflash it.
Just now I managed to fix it: I find one the same name key in
./build_dir/target-mipsel_24kc_musl/root-ramips/etc/opkg/keys/fde039f0d5af3cef
I copy it into my newifi box before I do sysupgrade, then I can reflash it.
Thanks for your information.
Regards.
zhengfish
On Fri, Jun 25, 2021 at 12:04 AM Michael Richardson <m...@sandelman.ca> wrote:
>
>
> zhengfish <zhengf...@gmail.com> wrote:
> > Hello, Guys Today I build one image for newifi router using 19.07.7
> > release. However while I try to reflash the router, it fails.
>
> > Seems it cannot read one key, I don't know what's this key? And how
> > to correct it?
>
> It means that the image is signed by a key that your device does not
> recognize.
> The possibilities are:
>
> 1) your current image was self-built, and did not include the release keys
> 2) your new image was self-built, and did not include the release keys.
> 3) some other failure.
>
> If you are self-building, then you should ahve the public key you can copy
> over. I think that sysupgrade also an option to skip the check, but I can't
> double check that from my laptop at the moment.
>
> --
> ] Never tell me the odds! | ipv6 mesh networks [
> ] Michael Richardson, Sandelman Software Works | IoT architect [
> ] m...@sandelman.ca http://www.sandelman.ca/ | ruby on rails
> [
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
