On 9/20/21 11:27 AM, Claudiu Beznea wrote:
Enable specific sam9x kernel config flags.
Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
---
target/linux/at91/sam9x/config-default | 168 +++++++++++++++++++++++--
1 file changed, 159 insertions(+), 9 deletions(-)
diff --git a/target/linux/at91/sam9x/config-default
b/target/linux/at91/sam9x/config-default
index d8b5c31dc7e5..a9f66766b1f2 100644
--- a/target/linux/at91/sam9x/config-default
+++ b/target/linux/at91/sam9x/config-default
@@ -1,7 +1,6 @@
.....
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBOARD=y
Do you really need keyboard support in OpenWrt?
OpenWrt uses some patches to hanlde buttons like a wifi on / off switch.
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
.....
+CONFIG_USB=y
+CONFIG_USB_ACM=y
+CONFIG_USB_AT91=y
+CONFIG_USB_ATMEL_USBA=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_CONFIGFS=y
I would prefer if you put the USB gadget stuff into a optional openwrt
kmod kernel package instead of compiling this into the kernel.
+CONFIG_USB_CONFIGFS_ACM=y
+# CONFIG_USB_CONFIGFS_ECM is not set
+# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
+# CONFIG_USB_CONFIGFS_EEM is not set
+# CONFIG_USB_CONFIGFS_F_FS is not set
+# CONFIG_USB_CONFIGFS_F_HID is not set
+# CONFIG_USB_CONFIGFS_F_LB_SS is not set
+# CONFIG_USB_CONFIGFS_F_PRINTER is not set
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+# CONFIG_USB_CONFIGFS_NCM is not set
+# CONFIG_USB_CONFIGFS_OBEX is not set
+# CONFIG_USB_CONFIGFS_RNDIS is not set
+# CONFIG_USB_CONFIGFS_SERIAL is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_AT91=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_F_ACM=y
+CONFIG_USB_F_ECM=y
+CONFIG_USB_F_MASS_STORAGE=y
+CONFIG_USB_F_RNDIS=y
+CONFIG_USB_F_SUBSET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_LIBCOMPOSITE=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_AT91=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
.....
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
