This is a continuation of the PR in GitHub[1] and v1 patch series. This patch series adds support for Panasonic Switch-M8eG PN28080K.
Panasonic Switch-M*eG PN28xx0K series has the following models: - Switch-M8eG PN28080K (RTL8380M, 8 + 1 SFP) - 1-9 : RTL8380M (SoC) - Switch-M16eG PN28160K (RTL8382M?, 14 + 2 combo) - ? - Switch-M24eG PN28240K (RTL8382M, 22 + 2 combo) - 1-8 : RTL8218B - 9-16: RTL8382M (SoC) - 17-24: RTL8218FB - Switch-M48eG PN28480K (RTL8393M, 44 + 4 combo) - 1-40: RTL8218B - 41-48: RTL8218FB (Note: I don't have a Switch-M16eG PN28160K and the hardware specification is unknown) These models have the many common parts, so 3rd commit creates a dtsi for This series. Note: - "Switch-M*eG" is a model name and "PN28xx0K" is a model number. Each model has two model number, "PN28xx0" and "PN28xx0K". But the first one (PN28xx0) is a Broadcom SoC based hardware. - This series uses the VxWorks-based kernel in stock firmware. [1]: https://github.com/openwrt/openwrt/pull/4209 v1 -> v2: - drop 5.4 changes - add interrupt-related properties to the nodes of PCA9539 and PCA9555 - use "gpio-keys" instead of "gpio-keys-polled" - update/remove comments in mtd partitions - use "led-*" scheme and add color/function properties for each node of LEDs - drop unnecessary default values from gpio-restart node INAGAKI Hiroshi (2): realtek: enable pca953x driver for target realtek: add support for Panasonic Switch-M8eG PN28080K target/linux/realtek/config-5.10 | 3 + .../rtl8380_panasonic_m8eg-pn28080k.dts | 123 ++++++++++ .../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi | 229 ++++++++++++++++++ target/linux/realtek/image/Makefile | 10 + 4 files changed, 365 insertions(+) create mode 100644 target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts create mode 100644 target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi -- 2.33.0.windows.2 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel