The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
There is a bug on the ethernet driver where the checks for the DSA tag and
tag generation don't include port 0. This causes any frame egressing from
the first port of the switch to have a VLAN 0 tag.
Fix this by extending the checks to include port 0.
RTL93xx tag generation functions rtl930x_decode_tag() and
rtl931x_decode_tag() do not check for the destination port. Therefore, move
the check for all 4 SoC families to be done directly in rtl838x_eth_tx().
Suggested-by: Birger Koblitz <m...@birger-koblitz.de>
Signed-off-by: Arınç ÜNAL <arinc.u...@arinc9.com>
---
v3: Resend because patchwork didn't catch the patch properly. Sorry for the
noise. My company uses Microsoft Exchange and I've yet to figure out how to
configure git-send-email with it. Owl for Thunderbird left me hanging.
Let's try sending over Outlook.
---
.../drivers/net/ethernet/rtl838x_eth.c | 59 +++++++++----------
1 file changed, 29 insertions(+), 30 deletions(-)
diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
index cf6aabc614..f3b7c994c3 100644
--- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
+++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
@@ -96,42 +96,38 @@ static void rtl838x_create_tx_header(struct p_hdr *h, int
dest_port, int prio)
{
prio &= 0x7;
- if (dest_port > 0) {
- // cpu_tag[0] is reserved on the RTL83XX SoCs
- h->cpu_tag[1] = 0x0401; // BIT 10: RTL8380_CPU_TAG, BIT0:
L2LEARNING on
- h->cpu_tag[2] = 0x0200; // Set only AS_DPM, to enable DPM
settings below
- h->cpu_tag[3] = 0x0000;
- h->cpu_tag[4] = BIT(dest_port) >> 16;
- h->cpu_tag[5] = BIT(dest_port) & 0xffff;
- // Set internal priority and AS_PRIO
- if (prio >= 0)
- h->cpu_tag[2] |= (prio | 0x8) << 12;
- }
+ // cpu_tag[0] is reserved on the RTL83XX SoCs
+ h->cpu_tag[1] = 0x0401; // BIT 10: RTL8380_CPU_TAG, BIT0: L2LEARNING on
+ h->cpu_tag[2] = 0x0200; // Set only AS_DPM, to enable DPM settings
below
+ h->cpu_tag[3] = 0x0000;
+ h->cpu_tag[4] = BIT(dest_port) >> 16;
+ h->cpu_tag[5] = BIT(dest_port) & 0xffff;
+ // Set internal priority and AS_PRIO
+ if (prio >= 0)
+ h->cpu_tag[2] |= (prio | 0x8) << 12;
}
static void rtl839x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
{
prio &= 0x7;
- if (dest_port > 0) {
- // cpu_tag[0] is reserved on the RTL83XX SoCs
- h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
- h->cpu_tag[2] = h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] =
0;
- // h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
- if (dest_port >= 32) {
- dest_port -= 32;
- h->cpu_tag[2] = BIT(dest_port) >> 16;
- h->cpu_tag[3] = BIT(dest_port) & 0xffff;
- } else {
- h->cpu_tag[4] = BIT(dest_port) >> 16;
- h->cpu_tag[5] = BIT(dest_port) & 0xffff;
- }
- h->cpu_tag[2] |= BIT(5); // Enable destination port mask use
- h->cpu_tag[2] |= BIT(8); // Enable L2 Learning
- // Set internal priority and AS_PRIO
- if (prio >= 0)
- h->cpu_tag[1] |= prio | BIT(3);
+ // cpu_tag[0] is reserved on the RTL83XX SoCs
+ h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
+ h->cpu_tag[2] = h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0;
+ // h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
+ if (dest_port >= 32) {
+ dest_port -= 32;
+ h->cpu_tag[2] = BIT(dest_port) >> 16;
+ h->cpu_tag[3] = BIT(dest_port) & 0xffff;
+ } else {
+ h->cpu_tag[4] = BIT(dest_port) >> 16;
+ h->cpu_tag[5] = BIT(dest_port) & 0xffff;
}
+ h->cpu_tag[2] |= BIT(5); // Enable destination port mask use
+ h->cpu_tag[2] |= BIT(8); // Enable L2 Learning
+ // Set internal priority and AS_PRIO
+ if (prio >= 0)
+ h->cpu_tag[1] |= prio | BIT(3);
}
static void rtl930x_create_tx_header(struct p_hdr *h, int dest_port, int prio)
@@ -1135,6 +1131,9 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct
net_device *dev)
int dest_port = -1;
int q = skb_get_queue_mapping(skb) % TXRINGS;
+ if (dest_port >= 0)
+ priv->r->create_tx_header(h, dest_port, skb->priority >> 1);
+
if (q) // Check for high prio queue
pr_debug("SKB priority: %d\n", skb->priority);
@@ -1142,7 +1141,7 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct
net_device *dev)
len = skb->len;
/* Check for DSA tagging at the end of the buffer */
- if (netdev_uses_dsa(dev) && skb->data[len-4] == 0x80 &&
skb->data[len-3] > 0
+ if (netdev_uses_dsa(dev) && skb->data[len-4] == 0x80 &&
skb->data[len-3] >= 0
&& skb->data[len-3] < priv->cpu_port &&
skb->data[len-2] == 0x10
&& skb->data[len-1] == 0x00) {
/* Reuse tag space for CRC if possible */
--
2.25.1
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
