Convert the QCA955x based devices to nvmem-cell based calibration data extraction, so this can be removed from the init scripts.
Changes in v2: - Put nvmem cell definition directly into partition node Sander Vanheule (6): ath79: D-Link DAP-2xxx (QCA955x): move art partition to DTSI ath79: D-Link DAP-2xxx (QCA955x): convert ath9k caldata to nvmem ath79: D-Link DAP-2680 A1: convert ath10k caldata to nvmem ath79: D-Link DAP-2660 A1: convert ath10k caldata to nvmem ath79: D-Link DAP-2695 A1: convert ath10k caldata to nvmem ath79: D-Link DAP-3662 A1: convert ath10k caldata to nvmem .../ath79/dts/qca9557_dlink_dap-2660-a1.dts | 20 +++++++++++++------ .../ath79/dts/qca9558_dlink_dap-2680-a1.dts | 20 +++++++++++++------ .../ath79/dts/qca9558_dlink_dap-2695-a1.dts | 20 +++++++++++++------ .../ath79/dts/qca9558_dlink_dap-3662-a1.dts | 20 +++++++++++++------ .../ath79/dts/qca955x_dlink_dap-2xxx.dtsi | 17 +++++++++++++++- .../etc/hotplug.d/firmware/11-ath10k-caldata | 12 ----------- .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 2 ++ 7 files changed, 74 insertions(+), 37 deletions(-) -- 2.36.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
