On 1/27/23 14:57, arinc9.u...@gmail.com wrote:
From: Arınç ÜNAL <arinc.u...@arinc9.com>
The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with a
Quectel RM520N-GL cellular modem which supports QMI and MBIM modes.
Specifications:
- MT7621AT, 256 MiB RAM, 16 MiB SPI Flash
- MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN
- Quectel RM520N-GL Cellular Modem
- 2 WLAN & 4 Cellular Antennas
- 5 Gigabit Ethernet Ports
- 1 USB 2.0 port
- 1 PCI-E Slot
- 1 M.2 slot
- 1 SIM card slot
- 1 SD card slot
Installation:
- Install sysupgrade image via ROOter OS.
TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.
Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html
Signed-off-by: Arınç ÜNAL <arinc.u...@arinc9.com>
---
v2: Add recovery information.
---
.../ramips/dts/mt7621_huasifei_ws1208v2.dts | 187 ++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 12 ++
.../mt7621/base-files/etc/board.d/01_leds | 3 +
3 files changed, 202 insertions(+)
create mode 100644 target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
diff --git a/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
new file mode 100644
index 0000000000..c69f05a0f4
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
@@ -0,0 +1,187 @@
.....
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+};
Please move this directly where you defined the factory partition in the
partitions node.
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 2269833e48..bbd25e5be0 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -996,6 +996,18 @@ define Device/humax_e10
endef
TARGET_DEVICES += humax_e10
+define Device/huasifei_ws1208v2
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := Huasifei
+ DEVICE_MODEL := WS1208V2
+ DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
+ kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option -wpad-basic-wolfssl
Why do you remove wpad-basic-wolfssl?
What is kmod-usb-net-cdc-mbim needed for?
+endef
+TARGET_DEVICES += huasifei_ws1208v2
+
define Device/iodata_wn-ax1167gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel