Add on/off fan support for the ZyXEL NBG7815. Single CPU cores, cluster CPU temperatures and the Aquantia PHY temperature sensor are monitored. The tmp103 sensor is missing from this patch, and can be added later, when kernel is bumped to 6.x, as it seems to require non-trivial hwmon backporting. Add kmod-phy-aquantia as default package while at it.
Note: this patch has been marked RFT, since temperature values tuning is needed from someone actively using this device in high load conditions. Furthermore, this change depends on an hwmon patch of which the correctness has not been determined. Thanks to robimarko for helping me out. CC: Andre Valentin <avalen...@marcant.net> CC: Karol Przybylski <karol.przybyl...@esm-technology.pl> Enrico Mioso (2): ipq807x: ZyXEL NBG7815: add fan support hack-5.15: add Aquantia PHY hwmon temperature clamp patch ...-clamp-temperature-value-in-aqr_hwmo.patch | 30 +++++ .../arm64/boot/dts/qcom/ipq8074-nbg7815.dts | 119 ++++++++++++++++++ target/linux/ipq807x/image/generic.mk | 2 +- 3 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 target/linux/generic/hack-5.15/726-net-phy-aquantia-clamp-temperature-value-in-aqr_hwmo.patch -- 2.39.2 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel