Hey, On Sun, Mar 26, 2023 at 6:29 AM <open...@aiyionpri.me> wrote: > > From: Jan-Niklas Burfeind <g...@aiyionpri.me> > > add the external button (GPIO 57) as reset button > > Signed-off-by: Jan-Niklas Burfeind <g...@aiyionpri.me> > --- > > Good afternoon everyone. > This is just a minor addition to the google wifi router > OpenWrt supports. > > I hope I didn't miss anything. > > Yours > aiyion
Thanks for doing this! This looks pretty good, although I'd make a small addition. See below: > .../files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git > a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts > b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts > index 65f5933305..85ce73afb3 100644 > --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts > +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wifi.dts > @@ -49,6 +49,16 @@ > }; > }; > }; > + > + keys { > + compatible = "gpio-keys"; > + > + reset { > + label = "reset"; > + gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; Normally, you want a pinctrl setting too, to tell the pin controller how to configure any biases, pull-ups/downs, etc. In this case, the configuration is trivial, so it probably doesn't make much difference, but for completeness, we should still add it. See how below we have this pinmux definition already: fw_pinmux { wp { pins = "gpio53"; output-low; }; recovery { pins = "gpio57"; bias-none; }; developer { pins = "gpio41"; bias-none; }; }; So, you just need to add a phandle reference, and it'll look something like: keys { compatible = "gpio-keys"; pinctrl-0 = <&fw_pinmux>; pinctrl-names = "default"; ... }; ... fw_pinmux: fw_pinmux { recovery { ... }; }; You can see an approximately similar change I made recently here: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=4c1d7787d460cd0798eb01a42c6a8a7fc96e2999 If you have trouble with that, I can play with it myself and send an updated version 2. Thanks, Brian > + linux,code = <KEY_RESTART>; > + }; > + }; > }; > > &tlmm { > -- > 2.40.0 > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel