Hi, We kind of don’t add image just to contain extra drivers. Extra UCI defaults for eth ordering are fine but please don’t add an extra image if it just contains 1-2 extra packages, installable via the ImageBuilder or OPKG.
> >> On Oct 23, 2023, at 8:52 PM, Xiaojun Liu <xiaojun....@silicom.co.il> wrote: >> >> Add new device Cordoba Edge Platform >> Device name:Cordoba Edge Platform >> hardware specifications: CPU - Intel Atom C3000 >> WiFi - mt7915e >> >> Signed-off-by: Xiaojun Liu mailto:xiaojun....@silicom.co.il >> --- >> >> target/linux/x86/base-files/etc/board.d/02_network | 11 +++++++++++ >> target/linux/x86/image/64.mk | 10 ++++++++++ >> 2 files changed, 21 insertions(+) >> >> >> diff --git a/target/linux/x86/base-files/etc/board.d/02_network >> b/target/linux/x86/base-files/etc/board.d/02_network >> index e00e8c04dd..be56153695 100644 >> --- a/target/linux/x86/base-files/etc/board.d/02_network >> +++ b/target/linux/x86/base-files/etc/board.d/02_network >> @@ -75,6 +75,17 @@ traverse-technologies-geos) >> macaddr="$(cat /sys/class/net/eth0/address)" 2>/dev/null >> [ -n "$macaddr" ] && ucidef_set_interface_macaddr "wan" "$macaddr" >> ;; >> +silicom-80500-0214-e53) >> + ucidef_set_network_device_path "wan0" >> "pci0000:00/0000:00:16.0/0000:03:00.0" >> + ucidef_set_network_device_path "wan1" >> "pci0000:00/0000:00:16.0/0000:03:00.1" >> + ucidef_set_network_device_path "media0" >> "pci0000:00/0000:00:17.0/0000:02:00.0" >> + ucidef_set_network_device_path "media1" >> "pci0000:00/0000:00:17.0/0000:02:00.1" >> + ucidef_set_network_device_path "eth0" >> "pci0000:00/0000:00:0c.0/0000:04:00.0" >> + ucidef_set_network_device_path "eth1" >> "pci0000:00/0000:00:0e.0/0000:05:00.0" >> + ucidef_set_network_device_path "eth2" >> "pci0000:00/0000:00:0f.0/0000:06:00.0" >> + ucidef_set_network_device_path "eth3" >> "pci0000:00/0000:00:10.0/0000:07:00.0" >> + ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3" "wan0" >> + ;; >> esac >> board_config_flush >> >> diff --git a/target/linux/x86/image/64.mk >> b/target/linux/x86/image/64.mk index 5ec9978b66..4addddeb98 100644 >> --- a/target/linux/x86/image/64.mk >> +++ b/target/linux/x86/image/64.mk >> @@ -8,3 +8,13 @@ define Device/generic >> GRUB2_VARIANT := generic >> endef >> TARGET_DEVICES += generic >> + >> +define Device/cordoba >> + DEVICE_VENDOR := Cordoba >> + DEVICE_MODEL := x86/64 >> + DEVICE_PACKAGES += \ >> + kmod-igc kmod-ixgbe \ >> + kmod-mt7915-firmware >> + GRUB2_VARIANT := generic >> +endef >> +TARGET_DEVICES += cordoba Please remove those lines in 64.mk. Thanks for you work and interest in OpenWrt support for your device. Best, Paul _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
