Currently, sysupgrade without the -n option complains: # sysupgrade -v tmp/openwrt-qoriq-generic-watchguard_firebox-m300-squashfs-sysupgrade.img.gz upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). upgrade: Kernel switched to FIT uImage. Update U-Boot environment. upgrade: Reading partition table from bootdisk... upgrade: Extract boot sector from the image upgrade: Reading partition table from image... Image check failed.
So, add the missing 05_compat-version to /etc/board.d/ Signed-off-by: Russell Senior <russ...@personaltelco.net> --- .../base-files/etc/board.d/05_compat-version | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 target/linux/qoriq/base-files/etc/board.d/05_compat-version diff --git a/target/linux/qoriq/base-files/etc/board.d/05_compat-version b/target/linux/qoriq/base-files/etc/board.d/05_compat-version new file mode 100644 index 0000000000..62ad804389 --- /dev/null +++ b/target/linux/qoriq/base-files/etc/board.d/05_compat-version @@ -0,0 +1,18 @@ +# +# Copyright (C) 2020 OpenWrt.org +# + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in + watchguard,firebox-m300) + ucidef_set_compat_version "1.1" + ;; +esac + +board_config_flush + +exit 0 -- 2.43.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
