(try#2, damn you gmail) I mentioned this on IRC and as a github comment on the commit (https://github.com/openwrt/openwrt/commit/2967e24d02775f63d9e363e6e0d351716dcc3f7c)
My build started failing on the commit. The message I get from the build system is: "WARNING: Image file /home/openwrt/src/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/ubnt_edgerouter-x-kernel.bin is too big: 3165615 > 3145728" I tried a vanilla config: CONFIG_TARGET_ramips=y CONFIG_TARGET_ramips_mt7621=y CONFIG_TARGET_ramips_mt7621_DEVICE_ubnt_edgerouter-x=y CONFIG_DEVEL=y CONFIG_BUILD_LOG=y "WARNING: Image file /home/openwrt/src/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/ubnt_edgerouter-x-kernel.bin is too big: 3165361 > 3145728" I notice that there are two kernel partitions on the NAND flash, each of which is 3MB: [ 1.011604] 6 fixed-partitions partitions found on MTD device mt7621-nand [ 1.025136] Creating 6 MTD partitions on "mt7621-nand": [ 1.035552] 0x000000000000-0x000000080000 : "u-boot" [ 1.054525] 0x000000080000-0x0000000e0000 : "u-boot-env" [ 1.072180] 0x0000000e0000-0x000000140000 : "factory" [ 1.089606] 0x000000140000-0x000000440000 : "kernel1" [ 1.147424] 0x000000440000-0x000000740000 : "kernel2" [ 1.204979] 0x000000740000-0x00000ff00000 : "ubi" Which suggests two possible fixes: a) cannibalize the second kernel parition (might require a different u-boot?); or b) use an intermediate u-boot that looks for the kernel in a ubi partition. or c) make the damn kernel smaller. Thoughts? -- Russell Senior russ...@personaltelco.net _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
