For some troublesome devices it is necessary to obtain direct access
to the SFP module EEPROM so define it in the device tree.
Suggested-by: Paul Donald <newt...@gmail.com>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
target/linux/bmips/dts/bcm6328-inteno-xg6846.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
index 72f85a53ca7c..9044f17c4f59 100644
--- a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
+++ b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
@@ -49,6 +49,12 @@
scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
+
+ sfp_eeprom: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ read-only;
+ };
};
/* This I2C bus is used for the external CATV connector (usually
unused) */
--
2.45.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
