On 2024-08-12 12:21, Bas Mevissen wrote: > All things being equal, is it worth a try with a different GCC version? Where GCC 13.3.4 boots, and 13.3.0... doesn't?
> > I acquired an HP 1920-24G and gave this branch a spin. Unfortunately, it does > not boot with this branch. Booting 23.05.4 and current main branch are fine. > >> System application is starting...[ 0.000000] Linux version 6.6.41 >> (bas@lenovo) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 4 >> [ 0.000000] RTL838X model is 83826800 >> [ 0.000000] SoC Type: RTL8382 >> [ 0.000000] printk: bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 00019070 (MIPS 4KEc) >> [ 0.000000] MIPS: machine is HPE 1920-24G (JG924A) >> [ 0.000000] earlycon: ns16550a0 at MMIO 0x18002000 (options '38400n8') >> [ 0.000000] printk: bootconsole [ns16550a0] enabled >> [ 0.000000] Initrd not found or empty - disabling initrd >> [ 0.000000] Using appended Device Tree. >> [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 >> bytes. >> [ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize >> 16 bytes >> [ 0.000000] Zone ranges: >> [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] >> [ 0.000000] Movable zone start for each node >> [ 0.000000] Early memory node ranges >> [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] >> [ 0.000000] Initmem setup node 0 [mem >> 0x0000000000000000-0x0000000007ffffff] > > So there is work to do. Not sure where to start as this is very early in the > kernel boot... > > For reference, this is part of the boot from > https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=realtek%2Frtl838x&id=hpe_1920-24g > >> System application is starting...[ 0.000000] Linux version 5.15.161 >> (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.4 >> [ 0.000000] RTL838X model is 83826800 >> [ 0.000000] SoC Type: RTL8382 >> [ 0.000000] printk: bootconsole [early0] enabled >> [ 0.000000] CPU0 revision is: 00019070 (MIPS 4KEc) >> [ 0.000000] MIPS: machine is HPE 1920-24G (JG924A) >> [ 0.000000] earlycon: ns16550a0 at MMIO 0x18002000 (options '38400n8') >> [ 0.000000] printk: bootconsole [ns16550a0] enabled >> [ 0.000000] Initrd not found or empty - disabling initrd >> [ 0.000000] Using appended Device Tree. >> [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 >> bytes. >> [ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize >> 16 bytes >> [ 0.000000] Zone ranges: >> [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] >> [ 0.000000] Movable zone start for each node >> [ 0.000000] Early memory node ranges >> [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] >> [ 0.000000] Initmem setup node 0 [mem >> 0x0000000000000000-0x0000000007ffffff] _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
