śr., 21 sie 2024 o 10:21 Janusz Dziedzic <janusz.dzied...@gmail.com> napisał(a):
>
> wt., 20 sie 2024 o 15:50 Janusz Dziedzic <janusz.dzied...@gmail.com>
> napisał(a):
> >
> > wt., 20 sie 2024 o 15:23 Janusz Dziedzic <janusz.dzied...@gmail.com>
> > napisał(a):
> > >
> > > Hello,
> > >
> > > Any hints about BE14 NIC - what should I enable in config. Does it work?
> > > Have latest main and seems no pci output with BE14 inside BPI-R4.
> > >
> > Sorry for the noise.
> > SW4 - on - after that module power on:
> >
> > root@OpenWrt:~# lspci
> > 0000:00:00.0 PCI bridge: MEDIATEK Corp. Device 7988 (rev 01)
> > 0000:01:00.0 Network controller: MEDIATEK Corp. Device 7990
> > 0001:00:00.0 PCI bridge: MEDIATEK Corp. Device 7988 (rev 01)
> > 0001:01:00.0 Network controller: MEDIATEK Corp. Device 7991
> > root@OpenWrt:~#
> > root@OpenWrt:~# ls /sys/class/ieee80211/
> > phy0 phy1
> > root@OpenWrt:~#
>
> Any hint why I don't see 5GHz?
> phy0 - report 2GHz
> phy1 - report 6GHz
>
> should one of them support both? Or should be another phyX? Or have
> wrong firmware?
>
Just in case someone read this :)
- patch [PATCH] wifi: mt76: mt7996: support mt7996 2+3+3 variant - required
- firmware 2-3-3
After that see 3 phys (all bands)
root@bpi-r4-9611025bdb3d:~# ls /lib/firmware/mediatek/mt7996/
mt7996_dsp.bin mt7996_eeprom_233.bin
mt7996_rom_patch_233.bin mt7996_wa_233.bin mt7996_wm_233.bin
mt7996_eeprom.bin mt7996_rom_patch.bin mt7996_wa.bin
mt7996_wm.bin
root@bpi-r4-9611025bdb3d:~#
root@bpi-r4-9611025bdb3d:~# ls /sys/class/ieee80211/
phy0 phy1 phy2
root@bpi-r4-9611025bdb3d:~#
root@bpi-r4-9611025bdb3d:~#
root@bpi-r4-9611025bdb3d:~#
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
