The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
Hi,
I prepared a patch for this switch about 6 months ago, but never got
around to submitting it.
The OEM firmware seems to do fan speed control in firmware - although
the algorithm used is not obvious - it's probably temperature sensor or
total power draw feedback, or some combination of the two. Additionally
when one fan fails the others go full-speed (and log faults).
The best policy is unfortunately probably to run the fans at full speed
by default.
If you want to take a look it's here, and should be pretty much complete.
https://github.com/openwrt/openwrt/compare/main...tim-seoss:openwrt:hpe-1920-24g-poe-370w-jg926a
Cheers,
Tim.
On 18/09/2024 03:09, Evan Jobling via openwrt-devel wrote:
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
South East Open Source Solutions Limited
Registered in England and Wales with company number 06134732.
Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ
VAT number: 900 6633 53 http://seoss.co.uk/ +44-(0)1273-808309
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
