The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped automatically by the mailing list software.
--- Begin Message ---Should the BPi-R4 be more richly provisioned? It's got 4 or 8GB of DRAM so it's hardly a "skinny" platform. Also, why are two different targets required for the same hardware? I get that the "10G SFP WAN" and "2.5G/10G WAN" ports are combo so that only one PHY can be in use at a time, but why can't a single target support both and just detect which is connected? Do we want to auto-select more packages like (say) mwan3 for instance? I think we have enough memory that we could include it and if it's not used it's not the end of the world. I'd include: lldpd curl 6in4 (or 6to4 or both?) avahi collectd firewall3 (or firewall4) hwclock iftop ip-full iptasn & iptgeoip ntp* snmp *swan xfrm zoneinfo But that's me. I'd rather have it and not need it than need it and not have it. Are there other BPi-R4 users that want to start a thread? Oh, one other question... I see there's a FPC connector for an extra LAN port (not clear if it's switched or not). Has anyone used that and what's the cable to make that work? Is there a knock-out machined into the case of an extra port? And the diagram here: https://docs.banana-pi.org/en/BPI-R4_Pro/BananaPi_BPI-R4_Pro Says "PoE Module RT5400" but I can't find any info on that. There's this: https://www.amazon.com/youyeetoo-BPI-RT5400-Isolation-BPI-F2P-BPI-WiFi/dp/B0D61ZKFL6 But it doesn't include the BPi-R4 in the description. Is it PD (my guess) or PI (for driving an external device)? Thanks
--- End Message ---
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
