Hello OpenWrt developers, I am writing to contribute a preliminary device tree source (DTS) file for the Zyxel GS1900-48HP switch. I am a beginner in this area, but I managed to create a working DTS by using the DTS for the GS1900-24HPv2 model as a base.
With this DTS, the device boots and basic switching functionality
works. Power over Ethernet (PoE) is supplied on all 24 PoE-capable
ports, however, I have identified a significant issue with PoE
management:
PoE Control Issue: Currently, it is only possible to control the
power (on/off) for the first PoE port (port 0). The remaining 23 PoE
ports are always on and cannot be managed via software.
I understand that this is an incomplete patch and the PoE control
needs to be fixed. However, I am providing it as a starting point. I
am willing to help in any way I can.
I am ready to test new firmware builds and provide any additional
data, outputs from dmesg, logread, or information from ubus that might
be helpful for debugging the PoE control issue.
The DTS file is attached to this email. Thank you for your time and
for the great work you do on OpenWrt.
Best regards, Kirill
rtl8393_zyxel_gs1900-48hp.dts
Description: audio/vnd.dts
[ 0.000000] Linux version 6.6.93 (deeily@riyoku) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28739-d9340319c6) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon Jun 23 20:40:36 2025 [ 0.000000] RTL838X model is ffffffff [ 0.000000] RTL839X model is 83936806 [ 0.000000] SoC Type: RTL8393 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019555 (MIPS 34Kc) [ 0.000000] MIPS: machine is ZyXEL GS1900-48HP [ 0.000000] earlycon: ns16550a0 at MMIO 0x18002000 (options '115200n8') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Using appended Device Tree. [ 0.000000] Detected 1 available secondary CPU(s) [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] percpu: Embedded 12 pages/cpu s16672 r8192 d24288 u49152 [ 0.000000] pcpu-alloc: s16672 r8192 d24288 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Kernel command line: earlycon [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00065620 [ 0.000000] Readback ErrCtl register=00065620 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 118716K/131072K available (7157K kernel code, 647K rwdata, 1620K rodata, 1256K init, 213K bss, 12356K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] rtl83xx-clk: initialized, CPU 750 MHz, MEM 400 MHz (16 Bit DDR3), LXB 200 MHz [ 0.000000] clocksource: realtek_otto_timer: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 38225208801 ns [ 0.000001] sched_clock: 28 bits at 3125kHz, resolution 320ns, wraps every 42949672800ns [ 0.009230] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464) [ 0.075916] pid_max: default: 32768 minimum: 301 [ 0.091781] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.099940] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.120362] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.131386] rcu: Hierarchical SRCU implementation. [ 0.136702] rcu: Max phase no-delay instances is 1000. [ 0.143699] smp: Bringing up secondary CPUs ... [ 0.150343] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.150388] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.150477] CPU1 revision is: 00019555 (MIPS 34Kc) [ 0.209034] Synchronize counters for CPU 1: done. [ 0.235618] smp: Brought up 1 node, 2 CPUs [ 0.250157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.261123] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.273696] pinctrl core: initialized pinctrl subsystem [ 0.283309] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.309857] rtl83xx-clk clock-controller: rate setting enabled, CPU 400-850 MHz, MEM 400-400 MHz, LXB 200-200 MHz, OVERCLOCK AT OWN RISK [ 0.326939] clocksource: Switched to clocksource realtek_otto_timer [ 0.346728] NET: Registered PF_INET protocol family [ 0.352549] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.361710] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.371054] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.379717] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.388310] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.396296] TCP: Hash tables configured (established 1024 bind 1024) [ 0.404240] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.412761] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.420105] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.429000] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.441455] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.450966] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.457526] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.472725] pinctrl-single 1b000004.pinmux: 32 pins, size 4 [ 0.480439] pinctrl-single 1b0000e4.pinmux: 32 pins, size 4 [ 0.488907] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.498797] printk: console [ttyS0] disabled [ 0.504940] 18002000.uart: ttyS0 at MMIO 0x18002000 (irq = 31, base_baud = 12500000) is a 16550A [ 0.515014] printk: console [ttyS0] enabled [ 0.524476] printk: bootconsole [early0] disabled [ 0.535132] printk: bootconsole [ns16550a0] disabled [ 0.548875] 18002100.uart: ttyS1 at MMIO 0x18002100 (irq = 30, base_baud = 12500000) is a 16550A [ 0.602000] brd: module loaded [ 0.610799] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 0.616397] 6 fixed-partitions partitions found on MTD device spi0.0 [ 0.623619] OF: Bad cell count for /soc/spi@1200/flash@0/partitions [ 0.630715] OF: Bad cell count for /soc/spi@1200/flash@0/partitions [ 0.638097] Creating 6 MTD partitions on "spi0.0": [ 0.643524] 0x000000000000-0x000000040000 : "u-boot" [ 0.650234] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.657386] 0x000000050000-0x000000060000 : "u-boot-env2" [ 0.665796] 0x000000060000-0x000000160000 : "jffs" [ 0.673773] 0x000000160000-0x000000260000 : "jffs2" [ 0.681904] 0x000000260000-0x000001000000 : "firmware" [ 0.690520] 2 uimage-fw partitions found on MTD device firmware [ 0.697266] Creating 2 MTD partitions on "firmware": [ 0.702860] 0x000000000000-0x0000003e0000 : "kernel" [ 0.710936] 0x0000003e0000-0x000000da0000 : "rootfs" [ 0.718278] mtd: setting mtd7 (rootfs) as root device [ 0.724031] 1 squashfs-split partitions found on MTD device rootfs [ 0.731033] 0x000000640000-0x000000da0000 : "rootfs_data" [ 0.765948] RTL839X Chip-Info: a0036290, version D [ 0.772053] Probing RTL838X eth device pdev: 81915c00, dev: 81915c10 [ 0.802013] Found SoC ID: 8393: RTL8393, family 8390 [ 0.808158] Using MAC 00007049a2490f90 [ 1.543235] rtl8393_serdes_probe: id: 48 [ 1.547741] Realtek RTL8393 SERDES mdio-bus:30: Detected internal RTL8390 SERDES [ 1.557895] rtl8393_serdes_probe: id: 49 [ 1.562296] Realtek RTL8393 SERDES mdio-bus:31: Detected internal RTL8390 SERDES [ 1.576876] NET: Registered PF_INET6 protocol family [ 1.593677] Segment Routing with IPv6 [ 1.597971] In-situ OAM (IOAM) with IPv6 [ 1.602522] NET: Registered PF_PACKET protocol family [ 1.608705] 8021q: 802.1Q VLAN Support v1.8 [ 1.676201] i2c-gpio i2c-gpio-0: Slow GPIO pins might wreak havoc into I2C/SMBus bus timing [ 1.686014] i2c-gpio i2c-gpio-0: using lines 560 (SDA) and 561 (SCL) [ 1.693953] i2c-gpio i2c-gpio-1: Slow GPIO pins might wreak havoc into I2C/SMBus bus timing [ 1.703651] i2c-gpio i2c-gpio-1: using lines 566 (SDA) and 567 (SCL) [ 1.711448] sfp sfp-p9: Host maximum power 1.0W [ 1.718182] sfp sfp-p10: Host maximum power 1.0W [ 1.724018] RTL839X Chip-Info: a0036290, version D [ 1.887061] random: crng init done [ 2.448720] rtl8393_serdes_probe: id: 48 [ 2.453120] Realtek RTL8393 SERDES rtldsa_mdio-0:30: Detected internal RTL8390 SERDES [ 2.463584] rtl8393_serdes_probe: id: 49 [ 2.468092] Realtek RTL8393 SERDES rtldsa_mdio-0:31: Detected internal RTL8390 SERDES [ 2.479813] rtl8393_serdes_probe: id: 63 [ 2.484210] Realtek RTL8393 SERDES rtldsa_mdio-0:3f: Detected internal RTL8390 SERDES [ 2.495480] In rtl83xx_vlan_setup [ 2.499292] UNKNOWN_MC_PMASK: 001fffffffffffff [ 2.504259] VLAN profile 0: L2 learning: 1, UNKN L2MC FLD PMSK 511, UNKN IPMC FLD PMSK 511, UNKN IPv6MC FLD PMSK: 511 [ 2.504274] VLAN profile 0: raw 000001ff, 003fe3ff [ 3.606963] rtl83xx_enable_phy_polling: 3ffffffffffff [ 4.647357] rtl83xx-switch switch@1b000000: configuring for fixed/qsgmii link mode [ 4.656187] rtl83xx-switch switch@1b000000: Link is Up - 1Gbps/Full - flow control off [ 4.657702] rtl83xx-switch switch@1b000000 lan01 (uninitialized): PHY [mdio-bus:00] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.681817] rtl83xx-switch switch@1b000000 lan02 (uninitialized): PHY [mdio-bus:01] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.698936] rtl83xx-switch switch@1b000000 lan03 (uninitialized): PHY [mdio-bus:02] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.715976] rtl83xx-switch switch@1b000000 lan04 (uninitialized): PHY [mdio-bus:03] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.732999] rtl83xx-switch switch@1b000000 lan05 (uninitialized): PHY [mdio-bus:04] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.749860] rtl83xx-switch switch@1b000000 lan06 (uninitialized): PHY [mdio-bus:05] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.766339] rtl83xx-switch switch@1b000000 lan07 (uninitialized): PHY [mdio-bus:06] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.783069] rtl83xx-switch switch@1b000000 lan08 (uninitialized): PHY [mdio-bus:07] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.800377] rtl83xx-switch switch@1b000000 lan09 (uninitialized): PHY [mdio-bus:08] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.817469] rtl83xx-switch switch@1b000000 lan10 (uninitialized): PHY [mdio-bus:09] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.834360] rtl83xx-switch switch@1b000000 lan11 (uninitialized): PHY [mdio-bus:0a] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.851432] rtl83xx-switch switch@1b000000 lan12 (uninitialized): PHY [mdio-bus:0b] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.868133] rtl83xx-switch switch@1b000000 lan13 (uninitialized): PHY [mdio-bus:0c] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.884703] rtl83xx-switch switch@1b000000 lan14 (uninitialized): PHY [mdio-bus:0d] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.901326] rtl83xx-switch switch@1b000000 lan15 (uninitialized): PHY [mdio-bus:0e] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.918384] rtl83xx-switch switch@1b000000 lan16 (uninitialized): PHY [mdio-bus:0f] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.934994] rtl83xx-switch switch@1b000000 lan17 (uninitialized): PHY [mdio-bus:10] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.951683] rtl83xx-switch switch@1b000000 lan18 (uninitialized): PHY [mdio-bus:11] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.968647] rtl83xx-switch switch@1b000000 lan19 (uninitialized): PHY [mdio-bus:12] driver [Realtek RTL8218B (external)] (irq=POLL) [ 4.985755] rtl83xx-switch switch@1b000000 lan20 (uninitialized): PHY [mdio-bus:13] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.002304] rtl83xx-switch switch@1b000000 lan21 (uninitialized): PHY [mdio-bus:14] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.019019] rtl83xx-switch switch@1b000000 lan22 (uninitialized): PHY [mdio-bus:15] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.036128] rtl83xx-switch switch@1b000000 lan23 (uninitialized): PHY [mdio-bus:16] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.052748] rtl83xx-switch switch@1b000000 lan24 (uninitialized): PHY [mdio-bus:17] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.069768] rtl83xx-switch switch@1b000000 lan25 (uninitialized): PHY [mdio-bus:18] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.086304] rtl83xx-switch switch@1b000000 lan26 (uninitialized): PHY [mdio-bus:19] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.103044] rtl83xx-switch switch@1b000000 lan27 (uninitialized): PHY [mdio-bus:1a] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.120256] rtl83xx-switch switch@1b000000 lan28 (uninitialized): PHY [mdio-bus:1b] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.137312] rtl83xx-switch switch@1b000000 lan29 (uninitialized): PHY [mdio-bus:1c] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.154222] rtl83xx-switch switch@1b000000 lan30 (uninitialized): PHY [mdio-bus:1d] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.170889] rtl83xx-switch switch@1b000000 lan31 (uninitialized): PHY [mdio-bus:1e] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.187657] rtl83xx-switch switch@1b000000 lan32 (uninitialized): PHY [mdio-bus:1f] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.204558] rtl83xx-switch switch@1b000000 lan33 (uninitialized): PHY [mdio-bus:20] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.221260] rtl83xx-switch switch@1b000000 lan34 (uninitialized): PHY [mdio-bus:21] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.238215] rtl83xx-switch switch@1b000000 lan35 (uninitialized): PHY [mdio-bus:22] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.254898] rtl83xx-switch switch@1b000000 lan36 (uninitialized): PHY [mdio-bus:23] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.272026] rtl83xx-switch switch@1b000000 lan37 (uninitialized): PHY [mdio-bus:24] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.288585] rtl83xx-switch switch@1b000000 lan38 (uninitialized): PHY [mdio-bus:25] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.306616] rtl83xx-switch switch@1b000000 lan39 (uninitialized): PHY [mdio-bus:26] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.323512] rtl83xx-switch switch@1b000000 lan40 (uninitialized): PHY [mdio-bus:27] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.340258] rtl83xx-switch switch@1b000000 lan41 (uninitialized): PHY [mdio-bus:28] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.357405] rtl83xx-switch switch@1b000000 lan42 (uninitialized): PHY [mdio-bus:29] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.374339] rtl83xx-switch switch@1b000000 lan43 (uninitialized): PHY [mdio-bus:2a] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.391340] rtl83xx-switch switch@1b000000 lan44 (uninitialized): PHY [mdio-bus:2b] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.408397] rtl83xx-switch switch@1b000000 lan45 (uninitialized): PHY [mdio-bus:2c] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.425202] rtl83xx-switch switch@1b000000 lan46 (uninitialized): PHY [mdio-bus:2d] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.442130] rtl83xx-switch switch@1b000000 lan47 (uninitialized): PHY [mdio-bus:2e] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.458786] rtl83xx-switch switch@1b000000 lan48 (uninitialized): PHY [mdio-bus:2f] driver [Realtek RTL8218B (external)] (irq=POLL) [ 5.476762] rtl838x-eth 1b00a300.ethernet eth0: entered promiscuous mode [ 5.484574] DSA: tree 0 setup [ 5.488071] LINK state irq: 20 [ 5.491546] In rtl83xx_setup_qos [ 5.495141] Setting up RTL839X QoS [ 5.498983] RTL839X_PRI_SEL_TBL_CTRL(i): 01112111 [ 5.504240] Current Intprio2queue setting: 00000000 [ 5.509729] QM_PKT2CPU_INTPRI_MAP: 00fac688 [ 5.514527] rtl838x_dbgfs_init called [ 5.518740] rtl83xx_fib_event_work_do: FIB4 default rule failed [ 5.525364] rtl83xx_fib_event_work_do: FIB4 default rule failed [ 5.537568] clk: Disabling unused clocks [ 5.548897] VFS: Mounted root (squashfs filesystem) readonly on device 31:7. [ 5.563081] Freeing unused kernel image (initmem) memory: 1256K [ 5.569770] This architecture does not have kernel memory protection. [ 5.577054] Run /sbin/init as init process [ 5.581635] with arguments: [ 5.584935] /sbin/init [ 5.587991] with environment: [ 5.591501] HOME=/ [ 5.594121] TERM=linux [ 6.152522] init: Console is alive [ 6.156750] init: - watchdog - [ 6.492981] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 6.538461] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 6.550137] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.561461] init: - preinit - [ 11.309823] RESETTING 8390, CPU_PORT 52 [ 11.514918] rtl838x-eth 1b00a300.ethernet eth0: configuring for fixed/internal link mode [ 11.523971] In rtl838x_mac_config, mode 1 [ 11.529261] rtl83xx-switch switch@1b000000 lan01: configuring for phy/qsgmii link mode [ 11.538315] rtl838x-eth 1b00a300.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 11.547325] 8021q: adding VLAN 0 to HW filter on device lan01 [ 11.554314] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 11.561812] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 11.584812] rtl83xx_fib_event_work_do: FIB4 failed [ 11.590454] rtl83xx_fib_event_work_do: FIB4 failed [ 11.595904] rtl83xx_fib_event_work_do: FIB4 failed [ 13.607030] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 16.039624] jffs2: notice: (1285) jffs2_build_xattr_subsystem: complete building xattr subsystem, 14 of xdatum (0 unchecked, 3 orphan) and 16 of xref (3 dead, 0 orphan) found. [ 16.059284] mount_root: switching to jffs2 overlay [ 16.067160] overlayfs: upper fs does not support tmpfile. [ 16.086815] urandom-seed: Seeding with /etc/urandom.seed [ 16.202949] rtl83xx_fib4_del: no such gateway: 0.0.0.0 [ 16.208986] rtl83xx_fib4_del: no such gateway: 0.0.0.0 [ 16.214812] rtl83xx_fib4_del: no such gateway: 0.0.0.0 [ 16.235210] procd: - early - [ 16.238919] procd: - watchdog - [ 16.930162] procd: - watchdog - [ 16.935023] procd: - ubus - [ 17.096080] procd: - init - [ 18.067525] kmodloader: loading kernel modules from /etc/modules.d/* [ 18.230374] kmodloader: done loading kernel modules from /etc/modules.d/* [ 19.830526] urngd: v1.0.2 started. [ 20.889001] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 27.616250] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 27.661679] in rtl838x_eth_stop [ 27.665317] rtl838x-eth 1b00a300.ethernet eth0: Link is Down [ 28.315797] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.323331] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.330884] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.338417] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.361127] RESETTING 8390, CPU_PORT 52 [ 28.612045] rtl838x-eth 1b00a300.ethernet eth0: configuring for fixed/internal link mode [ 28.621128] In rtl838x_mac_config, mode 1 [ 28.626198] rtl838x-eth 1b00a300.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 28.636758] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.644496] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.670859] rtl83xx-switch switch@1b000000 lan01: configuring for phy/qsgmii link mode [ 28.717375] 8021q: adding VLAN 0 to HW filter on device lan01 [ 28.746103] switch: port 1(lan01) entered blocking state [ 28.752181] switch: port 1(lan01) entered disabled state [ 28.758297] rtl83xx-switch switch@1b000000 lan01: entered allmulticast mode [ 28.766127] rtl838x-eth 1b00a300.ethernet eth0: entered allmulticast mode [ 28.774774] rtl83xx-switch switch@1b000000 lan01: entered promiscuous mode [ 28.884742] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 28.918326] Not offloading default route for now [ 28.925657] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 29.097313] rtl83xx-switch switch@1b000000 lan02: configuring for phy/qsgmii link mode [ 29.112580] 8021q: adding VLAN 0 to HW filter on device lan02 [ 29.134493] switch: port 2(lan02) entered blocking state [ 29.140623] switch: port 2(lan02) entered disabled state [ 29.146736] rtl83xx-switch switch@1b000000 lan02: entered allmulticast mode [ 29.198424] rtl83xx-switch switch@1b000000 lan02: entered promiscuous mode [ 29.273213] rtl83xx-switch switch@1b000000 lan03: configuring for phy/qsgmii link mode [ 29.291034] 8021q: adding VLAN 0 to HW filter on device lan03 [ 29.308546] switch: port 3(lan03) entered blocking state [ 29.314555] switch: port 3(lan03) entered disabled state [ 29.320868] rtl83xx-switch switch@1b000000 lan03: entered allmulticast mode [ 29.332006] rtl83xx-switch switch@1b000000 lan03: entered promiscuous mode [ 29.412679] rtl83xx-switch switch@1b000000 lan04: configuring for phy/qsgmii link mode [ 29.422391] 8021q: adding VLAN 0 to HW filter on device lan04 [ 29.438305] switch: port 4(lan04) entered blocking state [ 29.444377] switch: port 4(lan04) entered disabled state [ 29.450737] rtl83xx-switch switch@1b000000 lan04: entered allmulticast mode [ 29.459782] rtl83xx-switch switch@1b000000 lan04: entered promiscuous mode [ 29.569478] rtl83xx-switch switch@1b000000 lan05: configuring for phy/qsgmii link mode [ 29.597355] 8021q: adding VLAN 0 to HW filter on device lan05 [ 29.617607] switch: port 5(lan05) entered blocking state [ 29.623686] switch: port 5(lan05) entered disabled state [ 29.630070] rtl83xx-switch switch@1b000000 lan05: entered allmulticast mode [ 29.674365] rtl83xx-switch switch@1b000000 lan05: entered promiscuous mode [ 29.759123] rtl83xx-switch switch@1b000000 lan06: configuring for phy/qsgmii link mode [ 29.787291] 8021q: adding VLAN 0 to HW filter on device lan06 [ 29.808192] switch: port 6(lan06) entered blocking state [ 29.815452] switch: port 6(lan06) entered disabled state [ 29.823472] rtl83xx-switch switch@1b000000 lan06: entered allmulticast mode [ 29.832928] rtl83xx-switch switch@1b000000 lan06: entered promiscuous mode [ 29.952106] rtl83xx-switch switch@1b000000 lan07: configuring for phy/qsgmii link mode [ 29.968080] 8021q: adding VLAN 0 to HW filter on device lan07 [ 29.990998] switch: port 7(lan07) entered blocking state [ 29.997145] switch: port 7(lan07) entered disabled state [ 30.003179] rtl83xx-switch switch@1b000000 lan07: entered allmulticast mode [ 30.012008] rtl83xx-switch switch@1b000000 lan07: entered promiscuous mode [ 30.174292] rtl83xx-switch switch@1b000000 lan08: configuring for phy/qsgmii link mode [ 30.197431] 8021q: adding VLAN 0 to HW filter on device lan08 [ 30.212790] switch: port 8(lan08) entered blocking state [ 30.218964] switch: port 8(lan08) entered disabled state [ 30.225006] rtl83xx-switch switch@1b000000 lan08: entered allmulticast mode [ 30.233798] rtl83xx-switch switch@1b000000 lan08: entered promiscuous mode [ 30.298161] rtl83xx-switch switch@1b000000 lan09: configuring for phy/qsgmii link mode [ 30.317302] 8021q: adding VLAN 0 to HW filter on device lan09 [ 30.344067] switch: port 9(lan09) entered blocking state [ 30.350225] switch: port 9(lan09) entered disabled state [ 30.356279] rtl83xx-switch switch@1b000000 lan09: entered allmulticast mode [ 30.365206] rtl83xx-switch switch@1b000000 lan09: entered promiscuous mode [ 30.407216] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 30.414672] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 30.461243] rtl83xx-switch switch@1b000000 lan10: configuring for phy/qsgmii link mode [ 30.488381] 8021q: adding VLAN 0 to HW filter on device lan10 [ 30.507573] switch: port 10(lan10) entered blocking state [ 30.513657] switch: port 10(lan10) entered disabled state [ 30.519984] rtl83xx-switch switch@1b000000 lan10: entered allmulticast mode [ 30.528803] rtl83xx-switch switch@1b000000 lan10: entered promiscuous mode [ 30.607116] rtl83xx-switch switch@1b000000 lan11: configuring for phy/qsgmii link mode [ 30.637402] 8021q: adding VLAN 0 to HW filter on device lan11 [ 30.667132] switch: port 11(lan11) entered blocking state [ 30.673325] switch: port 11(lan11) entered disabled state [ 30.679643] rtl83xx-switch switch@1b000000 lan11: entered allmulticast mode [ 30.688622] rtl83xx-switch switch@1b000000 lan11: entered promiscuous mode [ 30.787325] rtl83xx-switch switch@1b000000 lan12: configuring for phy/qsgmii link mode [ 30.807626] 8021q: adding VLAN 0 to HW filter on device lan12 [ 30.827470] switch: port 12(lan12) entered blocking state [ 30.833556] switch: port 12(lan12) entered disabled state [ 30.839921] rtl83xx-switch switch@1b000000 lan12: entered allmulticast mode [ 30.848974] rtl83xx-switch switch@1b000000 lan12: entered promiscuous mode [ 30.884105] rtl83xx-switch switch@1b000000 lan13: configuring for phy/qsgmii link mode [ 30.893966] 8021q: adding VLAN 0 to HW filter on device lan13 [ 30.910288] switch: port 13(lan13) entered blocking state [ 30.916377] switch: port 13(lan13) entered disabled state [ 30.922736] rtl83xx-switch switch@1b000000 lan13: entered allmulticast mode [ 30.931803] rtl83xx-switch switch@1b000000 lan13: entered promiscuous mode [ 30.975380] rtl83xx-switch switch@1b000000 lan14: configuring for phy/qsgmii link mode [ 30.987182] 8021q: adding VLAN 0 to HW filter on device lan14 [ 31.007996] switch: port 14(lan14) entered blocking state [ 31.014099] switch: port 14(lan14) entered disabled state [ 31.020409] rtl83xx-switch switch@1b000000 lan14: entered allmulticast mode [ 31.038157] rtl83xx-switch switch@1b000000 lan14: entered promiscuous mode [ 31.107636] rtl83xx-switch switch@1b000000 lan15: configuring for phy/qsgmii link mode [ 31.128258] 8021q: adding VLAN 0 to HW filter on device lan15 [ 31.143263] switch: port 15(lan15) entered blocking state [ 31.149474] switch: port 15(lan15) entered disabled state [ 31.155631] rtl83xx-switch switch@1b000000 lan15: entered allmulticast mode [ 31.164691] rtl83xx-switch switch@1b000000 lan15: entered promiscuous mode [ 31.241104] rtl83xx-switch switch@1b000000 lan16: configuring for phy/qsgmii link mode [ 31.257328] 8021q: adding VLAN 0 to HW filter on device lan16 [ 31.274188] switch: port 16(lan16) entered blocking state [ 31.280371] switch: port 16(lan16) entered disabled state [ 31.286526] rtl83xx-switch switch@1b000000 lan16: entered allmulticast mode [ 31.295589] rtl83xx-switch switch@1b000000 lan16: entered promiscuous mode [ 31.331582] rtl83xx-switch switch@1b000000 lan17: configuring for phy/qsgmii link mode [ 31.347571] 8021q: adding VLAN 0 to HW filter on device lan17 [ 31.368343] switch: port 17(lan17) entered blocking state [ 31.374430] switch: port 17(lan17) entered disabled state [ 31.380730] rtl83xx-switch switch@1b000000 lan17: entered allmulticast mode [ 31.389868] rtl83xx-switch switch@1b000000 lan17: entered promiscuous mode [ 31.439720] rtl83xx-switch switch@1b000000 lan18: configuring for phy/qsgmii link mode [ 31.454710] 8021q: adding VLAN 0 to HW filter on device lan18 [ 31.469880] switch: port 18(lan18) entered blocking state [ 31.475986] switch: port 18(lan18) entered disabled state [ 31.482341] rtl83xx-switch switch@1b000000 lan18: entered allmulticast mode [ 31.491552] rtl83xx-switch switch@1b000000 lan18: entered promiscuous mode [ 31.532268] rtl83xx-switch switch@1b000000 lan19: configuring for phy/qsgmii link mode [ 31.542126] 8021q: adding VLAN 0 to HW filter on device lan19 [ 31.562121] switch: port 19(lan19) entered blocking state [ 31.568368] switch: port 19(lan19) entered disabled state [ 31.574536] rtl83xx-switch switch@1b000000 lan19: entered allmulticast mode [ 31.583716] rtl83xx-switch switch@1b000000 lan19: entered promiscuous mode [ 31.617539] rtl83xx-switch switch@1b000000 lan20: configuring for phy/qsgmii link mode [ 31.627249] 8021q: adding VLAN 0 to HW filter on device lan20 [ 31.643070] switch: port 20(lan20) entered blocking state [ 31.649372] switch: port 20(lan20) entered disabled state [ 31.655512] rtl83xx-switch switch@1b000000 lan20: entered allmulticast mode [ 31.664788] rtl83xx-switch switch@1b000000 lan20: entered promiscuous mode [ 31.703284] rtl83xx-switch switch@1b000000 lan21: configuring for phy/qsgmii link mode [ 31.712710] 8021q: adding VLAN 0 to HW filter on device lan21 [ 31.727781] switch: port 21(lan21) entered blocking state [ 31.733878] switch: port 21(lan21) entered disabled state [ 31.740187] rtl83xx-switch switch@1b000000 lan21: entered allmulticast mode [ 31.749535] rtl83xx-switch switch@1b000000 lan21: entered promiscuous mode [ 31.784242] rtl83xx-switch switch@1b000000 lan22: configuring for phy/qsgmii link mode [ 31.793920] 8021q: adding VLAN 0 to HW filter on device lan22 [ 31.809146] switch: port 22(lan22) entered blocking state [ 31.815255] switch: port 22(lan22) entered disabled state [ 31.821586] rtl83xx-switch switch@1b000000 lan22: entered allmulticast mode [ 31.831112] rtl83xx-switch switch@1b000000 lan22: entered promiscuous mode [ 31.865550] rtl83xx-switch switch@1b000000 lan23: configuring for phy/qsgmii link mode [ 31.875430] 8021q: adding VLAN 0 to HW filter on device lan23 [ 31.890627] switch: port 23(lan23) entered blocking state [ 31.896736] switch: port 23(lan23) entered disabled state [ 31.903038] rtl83xx-switch switch@1b000000 lan23: entered allmulticast mode [ 31.912497] rtl83xx-switch switch@1b000000 lan23: entered promiscuous mode [ 31.945376] rtl83xx-switch switch@1b000000 lan24: configuring for phy/qsgmii link mode [ 31.954957] 8021q: adding VLAN 0 to HW filter on device lan24 [ 31.970767] switch: port 24(lan24) entered blocking state [ 31.976873] switch: port 24(lan24) entered disabled state [ 31.983200] rtl83xx-switch switch@1b000000 lan24: entered allmulticast mode [ 31.992649] rtl83xx-switch switch@1b000000 lan24: entered promiscuous mode [ 32.028274] rtl83xx-switch switch@1b000000 lan25: configuring for phy/qsgmii link mode [ 32.038090] 8021q: adding VLAN 0 to HW filter on device lan25 [ 32.053835] switch: port 25(lan25) entered blocking state [ 32.060152] switch: port 25(lan25) entered disabled state [ 32.066294] rtl83xx-switch switch@1b000000 lan25: entered allmulticast mode [ 32.075901] rtl83xx-switch switch@1b000000 lan25: entered promiscuous mode [ 32.111019] rtl83xx-switch switch@1b000000 lan26: configuring for phy/qsgmii link mode [ 32.120944] 8021q: adding VLAN 0 to HW filter on device lan26 [ 32.136420] switch: port 26(lan26) entered blocking state [ 32.142722] switch: port 26(lan26) entered disabled state [ 32.148991] rtl83xx-switch switch@1b000000 lan26: entered allmulticast mode [ 32.158656] rtl83xx-switch switch@1b000000 lan26: entered promiscuous mode [ 32.195094] rtl83xx-switch switch@1b000000 lan27: configuring for phy/qsgmii link mode [ 32.204664] 8021q: adding VLAN 0 to HW filter on device lan27 [ 32.220361] switch: port 27(lan27) entered blocking state [ 32.226488] switch: port 27(lan27) entered disabled state [ 32.232788] rtl83xx-switch switch@1b000000 lan27: entered allmulticast mode [ 32.242566] rtl83xx-switch switch@1b000000 lan27: entered promiscuous mode [ 32.279655] rtl83xx-switch switch@1b000000 lan28: configuring for phy/qsgmii link mode [ 32.289501] 8021q: adding VLAN 0 to HW filter on device lan28 [ 32.304451] switch: port 28(lan28) entered blocking state [ 32.310756] switch: port 28(lan28) entered disabled state [ 32.317039] rtl83xx-switch switch@1b000000 lan28: entered allmulticast mode [ 32.326711] rtl83xx-switch switch@1b000000 lan28: entered promiscuous mode [ 32.364524] rtl83xx-switch switch@1b000000 lan29: configuring for phy/qsgmii link mode [ 32.374046] 8021q: adding VLAN 0 to HW filter on device lan29 [ 32.389651] switch: port 29(lan29) entered blocking state [ 32.395764] switch: port 29(lan29) entered disabled state [ 32.402070] rtl83xx-switch switch@1b000000 lan29: entered allmulticast mode [ 32.412009] rtl83xx-switch switch@1b000000 lan29: entered promiscuous mode [ 32.455716] rtl83xx-switch switch@1b000000 lan30: configuring for phy/qsgmii link mode [ 32.465154] 8021q: adding VLAN 0 to HW filter on device lan30 [ 32.480443] switch: port 30(lan30) entered blocking state [ 32.486523] switch: port 30(lan30) entered disabled state [ 32.492802] rtl83xx-switch switch@1b000000 lan30: entered allmulticast mode [ 32.502725] rtl83xx-switch switch@1b000000 lan30: entered promiscuous mode [ 32.547802] rtl83xx-switch switch@1b000000 lan31: configuring for phy/qsgmii link mode [ 32.568310] 8021q: adding VLAN 0 to HW filter on device lan31 [ 32.590411] switch: port 31(lan31) entered blocking state [ 32.596510] switch: port 31(lan31) entered disabled state [ 32.602801] rtl83xx-switch switch@1b000000 lan31: entered allmulticast mode [ 32.612816] rtl83xx-switch switch@1b000000 lan31: entered promiscuous mode [ 32.667183] rtl83xx-switch switch@1b000000 lan32: configuring for phy/qsgmii link mode [ 32.679344] 8021q: adding VLAN 0 to HW filter on device lan32 [ 32.694449] switch: port 32(lan32) entered blocking state [ 32.700670] switch: port 32(lan32) entered disabled state [ 32.706830] rtl83xx-switch switch@1b000000 lan32: entered allmulticast mode [ 32.717106] rtl83xx-switch switch@1b000000 lan32: entered promiscuous mode [ 32.759711] rtl83xx-switch switch@1b000000 lan33: configuring for phy/qsgmii link mode [ 32.772326] 8021q: adding VLAN 0 to HW filter on device lan33 [ 32.797006] switch: port 33(lan33) entered blocking state [ 32.803115] switch: port 33(lan33) entered disabled state [ 32.809440] rtl83xx-switch switch@1b000000 lan33: entered allmulticast mode [ 32.819826] rtl83xx-switch switch@1b000000 lan33: entered promiscuous mode [ 32.865478] rtl83xx-switch switch@1b000000 lan34: configuring for phy/qsgmii link mode [ 32.875458] 8021q: adding VLAN 0 to HW filter on device lan34 [ 32.906823] switch: port 34(lan34) entered blocking state [ 32.913088] switch: port 34(lan34) entered disabled state [ 32.919452] rtl83xx-switch switch@1b000000 lan34: entered allmulticast mode [ 32.929667] rtl83xx-switch switch@1b000000 lan34: entered promiscuous mode [ 32.977645] rtl83xx-switch switch@1b000000 lan35: configuring for phy/qsgmii link mode [ 32.988501] 8021q: adding VLAN 0 to HW filter on device lan35 [ 33.003960] switch: port 35(lan35) entered blocking state [ 33.010157] switch: port 35(lan35) entered disabled state [ 33.016319] rtl83xx-switch switch@1b000000 lan35: entered allmulticast mode [ 33.026560] rtl83xx-switch switch@1b000000 lan35: entered promiscuous mode [ 33.080303] rtl83xx-switch switch@1b000000 lan36: configuring for phy/qsgmii link mode [ 33.091896] 8021q: adding VLAN 0 to HW filter on device lan36 [ 33.115408] switch: port 36(lan36) entered blocking state [ 33.121646] switch: port 36(lan36) entered disabled state [ 33.127917] rtl83xx-switch switch@1b000000 lan36: entered allmulticast mode [ 33.145691] rtl83xx-switch switch@1b000000 lan36: entered promiscuous mode [ 33.193946] rtl83xx-switch switch@1b000000 lan37: configuring for phy/qsgmii link mode [ 33.211787] 8021q: adding VLAN 0 to HW filter on device lan37 [ 33.237892] switch: port 37(lan37) entered blocking state [ 33.243989] switch: port 37(lan37) entered disabled state [ 33.250341] rtl83xx-switch switch@1b000000 lan37: entered allmulticast mode [ 33.261144] rtl83xx-switch switch@1b000000 lan37: entered promiscuous mode [ 33.325715] rtl83xx-switch switch@1b000000 lan38: configuring for phy/qsgmii link mode [ 33.336387] 8021q: adding VLAN 0 to HW filter on device lan38 [ 33.354475] switch: port 38(lan38) entered blocking state [ 33.360693] switch: port 38(lan38) entered disabled state [ 33.366849] rtl83xx-switch switch@1b000000 lan38: entered allmulticast mode [ 33.377760] rtl83xx-switch switch@1b000000 lan38: entered promiscuous mode [ 33.398057] rtl83xx-switch switch@1b000000 lan16: Link is Up - 100Mbps/Full - flow control rx/tx [ 33.408314] switch: port 16(lan16) entered blocking state [ 33.414440] switch: port 16(lan16) entered forwarding state [ 33.489450] rtl83xx-switch switch@1b000000 lan39: configuring for phy/qsgmii link mode [ 33.507057] 8021q: adding VLAN 0 to HW filter on device lan39 [ 33.522124] switch: port 39(lan39) entered blocking state [ 33.528411] switch: port 39(lan39) entered disabled state [ 33.534592] rtl83xx-switch switch@1b000000 lan39: entered allmulticast mode [ 33.545264] rtl83xx-switch switch@1b000000 lan39: entered promiscuous mode [ 33.590805] rtl83xx-switch switch@1b000000 lan40: configuring for phy/qsgmii link mode [ 33.601858] 8021q: adding VLAN 0 to HW filter on device lan40 [ 33.627317] switch: port 40(lan40) entered blocking state [ 33.633462] switch: port 40(lan40) entered disabled state [ 33.639815] rtl83xx-switch switch@1b000000 lan40: entered allmulticast mode [ 33.650603] rtl83xx-switch switch@1b000000 lan40: entered promiscuous mode [ 33.692767] rtl83xx-switch switch@1b000000 lan41: configuring for phy/qsgmii link mode [ 33.703928] 8021q: adding VLAN 0 to HW filter on device lan41 [ 33.718974] switch: port 41(lan41) entered blocking state [ 33.725089] switch: port 41(lan41) entered disabled state [ 33.731430] rtl83xx-switch switch@1b000000 lan41: entered allmulticast mode [ 33.742319] rtl83xx-switch switch@1b000000 lan41: entered promiscuous mode [ 33.803141] rtl83xx-switch switch@1b000000 lan42: configuring for phy/qsgmii link mode [ 33.812544] 8021q: adding VLAN 0 to HW filter on device lan42 [ 33.827252] switch: port 42(lan42) entered blocking state [ 33.833325] switch: port 42(lan42) entered disabled state [ 33.839550] rtl83xx-switch switch@1b000000 lan42: entered allmulticast mode [ 33.849465] rtl83xx-switch switch@1b000000 lan42: entered promiscuous mode [ 33.884666] rtl83xx-switch switch@1b000000 lan43: configuring for phy/qsgmii link mode [ 33.894072] 8021q: adding VLAN 0 to HW filter on device lan43 [ 33.908687] switch: port 43(lan43) entered blocking state [ 33.914739] switch: port 43(lan43) entered disabled state [ 33.920952] rtl83xx-switch switch@1b000000 lan43: entered allmulticast mode [ 33.932227] rtl83xx-switch switch@1b000000 lan43: entered promiscuous mode [ 33.965680] rtl83xx-switch switch@1b000000 lan44: configuring for phy/qsgmii link mode [ 33.975097] 8021q: adding VLAN 0 to HW filter on device lan44 [ 33.989707] switch: port 44(lan44) entered blocking state [ 33.995761] switch: port 44(lan44) entered disabled state [ 34.002037] rtl83xx-switch switch@1b000000 lan44: entered allmulticast mode [ 34.013247] rtl83xx-switch switch@1b000000 lan44: entered promiscuous mode [ 34.045899] rtl83xx-switch switch@1b000000 lan45: configuring for phy/qsgmii link mode [ 34.055298] 8021q: adding VLAN 0 to HW filter on device lan45 [ 34.069510] switch: port 45(lan45) entered blocking state [ 34.075561] switch: port 45(lan45) entered disabled state [ 34.081845] rtl83xx-switch switch@1b000000 lan45: entered allmulticast mode [ 34.093054] rtl83xx-switch switch@1b000000 lan45: entered promiscuous mode [ 34.124059] rtl83xx-switch switch@1b000000 lan46: configuring for phy/qsgmii link mode [ 34.133427] 8021q: adding VLAN 0 to HW filter on device lan46 [ 34.147634] switch: port 46(lan46) entered blocking state [ 34.153688] switch: port 46(lan46) entered disabled state [ 34.159968] rtl83xx-switch switch@1b000000 lan46: entered allmulticast mode [ 34.171550] rtl83xx-switch switch@1b000000 lan46: entered promiscuous mode [ 34.204264] rtl83xx-switch switch@1b000000 lan47: configuring for phy/qsgmii link mode [ 34.213661] 8021q: adding VLAN 0 to HW filter on device lan47 [ 34.227881] switch: port 47(lan47) entered blocking state [ 34.233933] switch: port 47(lan47) entered disabled state [ 34.240208] rtl83xx-switch switch@1b000000 lan47: entered allmulticast mode [ 34.251753] rtl83xx-switch switch@1b000000 lan47: entered promiscuous mode [ 34.267993] rtl83xx-switch switch@1b000000 lan26: Link is Up - 100Mbps/Full - flow control rx/tx [ 34.277099] switch: port 26(lan26) entered blocking state [ 34.283859] switch: port 26(lan26) entered forwarding state [ 34.310347] rtl83xx-switch switch@1b000000 lan48: configuring for phy/qsgmii link mode [ 34.319764] 8021q: adding VLAN 0 to HW filter on device lan48 [ 34.338978] switch: port 48(lan48) entered blocking state [ 34.345033] switch: port 48(lan48) entered disabled state [ 34.351312] rtl83xx-switch switch@1b000000 lan48: entered allmulticast mode [ 34.362993] rtl83xx-switch switch@1b000000 lan48: entered promiscuous mode [ 34.382504] rtl83xx-switch switch@1b000000 lan49: configuring for fixed/sgmii link mode [ 34.391711] 8021q: adding VLAN 0 to HW filter on device lan49 [ 34.399235] switch: port 49(lan49) entered blocking state [ 34.405306] switch: port 49(lan49) entered disabled state [ 34.411510] rtl83xx-switch switch@1b000000 lan49: entered allmulticast mode [ 34.423515] rtl83xx-switch switch@1b000000 lan49: entered promiscuous mode [ 34.444247] rtl83xx-switch switch@1b000000 lan50: configuring for fixed/sgmii link mode [ 34.453462] 8021q: adding VLAN 0 to HW filter on device lan50 [ 34.460965] switch: port 50(lan50) entered blocking state [ 34.467152] switch: port 50(lan50) entered disabled state [ 34.473260] rtl83xx-switch switch@1b000000 lan50: entered allmulticast mode [ 34.485250] rtl83xx-switch switch@1b000000 lan50: entered promiscuous mode [ 34.513511] rtl83xx-switch switch@1b000000 lan29: Link is Up - 100Mbps/Full - flow control off [ 34.513896] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 34.530868] switch: port 29(lan29) entered blocking state [ 34.537080] switch: port 29(lan29) entered forwarding state [ 35.447458] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 35.455773] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported [ 35.704813] rtl83xx-switch switch@1b000000 lan31: Link is Up - 100Mbps/Full - flow control rx/tx [ 35.723264] switch: port 31(lan31) entered blocking state [ 35.729455] switch: port 31(lan31) entered forwarding state [ 36.022339] rtl83xx-switch switch@1b000000 lan43: Link is Up - 100Mbps/Full - flow control rx/tx [ 36.032610] switch: port 43(lan43) entered blocking state [ 36.038857] switch: port 43(lan43) entered forwarding state [ 36.197217] rtl83xx-switch switch@1b000000 lan35: Link is Up - 1Gbps/Full - flow control rx/tx [ 36.207605] switch: port 35(lan35) entered blocking state [ 36.213702] switch: port 35(lan35) entered forwarding state [ 36.415149] rtl83xx-switch switch@1b000000 lan27: Link is Up - 1Gbps/Full - flow control rx/tx [ 36.425147] switch: port 27(lan27) entered blocking state [ 36.431389] switch: port 27(lan27) entered forwarding state [ 37.855860] rtl83xx-switch switch@1b000000 lan40: Link is Up - 1Gbps/Full - flow control off [ 37.857075] switch: port 40(lan40) entered blocking state [ 37.867150] rtl83xx-switch switch@1b000000 lan41: Link is Up - 1Gbps/Full - flow control rx/tx [ 37.871482] switch: port 40(lan40) entered forwarding state [ 37.888202] switch: port 41(lan41) entered blocking state [ 37.894323] switch: port 41(lan41) entered forwarding state [ 38.014344] rtl83xx-switch switch@1b000000 lan42: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.017080] switch: port 42(lan42) entered blocking state [ 38.030116] switch: port 42(lan42) entered forwarding state [ 38.259659] rtl83xx-switch switch@1b000000 lan44: Link is Up - 1Gbps/Full - flow control off [ 38.267146] switch: port 44(lan44) entered blocking state [ 38.275175] switch: port 44(lan44) entered forwarding state [ 38.340886] rtl83xx-switch switch@1b000000 lan46: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.347095] switch: port 46(lan46) entered blocking state [ 38.352074] rtl83xx-switch switch@1b000000 lan45: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.356562] switch: port 46(lan46) entered forwarding state [ 38.373409] switch: port 45(lan45) entered blocking state [ 38.379605] switch: port 45(lan45) entered forwarding state [ 38.415099] rtl83xx-switch switch@1b000000 lan47: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.417083] switch: port 47(lan47) entered blocking state [ 38.430871] switch: port 47(lan47) entered forwarding state [ 48.739467] rtl83xx-switch switch@1b000000 lan24: Link is Up - 1Gbps/Full - flow control rx/tx [ 48.747142] switch: port 24(lan24) entered blocking state [ 48.755216] switch: port 24(lan24) entered forwarding state
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
