#16732: WLAN blackout - TL-WR1043ND v1.x with Barrier Breaker
-----------------------+-------------------------------------
Reporter: Anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker (trunk)
Component: packages | Version: Trunk
Keywords: |
-----------------------+-------------------------------------
I'm experiencing *recurring Wifi blackouts* on this router and firmware
happening nearly twice a week in the afternoon near the weekends. The Wlan
is programmed to turn off at 01.00 o'clock at night. The router does a
reboot at 06.00 o'clock in the morning every day - WLAN gets on
automatically with reboot.
At Wifi blackout the ESSID disapears. When trying to connect it says on
smartphone "Authentication error". Either wlan-restarting or rebooting the
router brings back the Wifi. I excised some lines from Kernel and System
log. I marked the lines which are suspicious to me with * But I dont know
how to fix this.
Yesterday the WLAN dropped out like 5 times while I was watching Youtube
with chromecast on TV.
* Kernel Log *
[ 8.760000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 8.770000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 8.780000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 8.790000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 8.790000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 8.800000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 8.870000] PPP generic driver version 2.4.2
[ 8.880000] NET: Registered protocol family 24
[ 8.960000] ath: EEPROM regdomain: 0x0
[ 8.960000] ath: EEPROM indicates default country code should be used
[ 8.960000] ath: doing EEPROM country->regdmn map search
[ 8.960000] ath: country maps to regdmn code: 0x3a
[ 8.960000] ath: Country alpha2 being used: US
[ 8.960000] ath: Regpair used: 0x3a
[ 8.980000] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 8.990000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF
Rev:a2 mem=0xb80c0000, irq=2
[ 9.030000] cfg80211: Calling CRDA for country: US
[ 9.030000] cfg80211: Regulatory domain changed to country: US
[ 9.040000] cfg80211: DFS Master region: FCC
[ 9.040000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.050000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
3000 mBm), (N/A)
[ 9.060000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
1700 mBm), (N/A)
[ 9.070000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A,
2300 mBm), (0 s)
[ 9.080000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
3000 mBm), (N/A)
[ 9.090000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 18.310000] ar71xx: pll_reg 0xb8050014: 0x1a000000
[ 18.330000] eth0: link up (1000Mbps/Full duplex)
[ 18.360000] device eth0.1 entered promiscuous mode
[ 18.370000] device eth0 entered promiscuous mode
[ 18.400000] br-lan: port 1(eth0.1) entered forwarding state
[ 18.400000] br-lan: port 1(eth0.1) entered forwarding state
[ 19.820000] cfg80211: Calling CRDA for country: DE
[ 19.820000] cfg80211: Regulatory domain changed to country: DE
[ 19.830000] cfg80211: DFS Master region: ETSI
[ 19.830000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.840000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 19.850000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 19.860000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A,
2000 mBm), (0 s)
[ 19.870000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A,
2700 mBm), (0 s)
[ 19.870000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 20.400000] br-lan: port 1(eth0.1) entered forwarding state
[ 23.040000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[* 23.060000] device wlan0 entered promiscuous mode
[ 24.270000] br-lan: port 2(wlan0) entered forwarding state
[ 24.280000] br-lan: port 2(wlan0) entered forwarding state
[ 24.280000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.280000] br-lan: port 2(wlan0) entered forwarding state
[ 952.320000] nf_conntrack: automatic helper assignment is deprecated and
it will be removed soon. Use the iptables CT target to attach helpers
instead.
* System Log *
Wed May 28 11:00:33 2014 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx
WPA: group key handshake completed (RSN)
Wed May 28 11:00:34 2014 daemon.info hostapd: wlan0: STA yy:yy:yy:yy:yy:yy
WPA: group key handshake completed (RSN)
Wed May 28 11:10:41 2014 daemon.info hostapd: wlan0: STA yy:yy:yy:yy:yy:yy
IEEE 802.11: deauthenticated due to local deauth request
Wed May 28 11:10:41 2014 daemon.info hostapd: wlan0: STA xx:xx:xx:xx:xx:xx
IEEE 802.11: deauthenticated due to local deauth request
------------------------------------------------------------------------------------
MY ROUTER SETUP
------------------------------------------------------------------------------------
Generic 802.11bgn Wireless Controller (radio0)
SSID: XXXXXXXX
Mode: Master
Channel: 8 (2.447 GHz)
Bitrate: 30.9 Mbit/s
BSSID: XX:XX:XX:XX:XX:XX
Encryption: mixed WPA/WPA2 PSK (CCMP)
Hide ESSID: [ OFF ]
WMM Mode: [ ON ]
Router: TP-Link TL-WR1043ND v1.9 (German Version)
Firmware: OpenWrt Barrier Breaker r40769 / LuCI Trunk (svn-r10180)
Kernel Version: 3.10.36
I am using Port Mirroring Feature as texted in the official wiki.
{{{
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/16732>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
