#16948: Wireless, iptables and pppd broken after updating linux 3.10.44
-----------------------------+-------------------------------------
Reporter: magicfish1990@… | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker (trunk)
Component: base system | Version: Trunk
Keywords: |
-----------------------------+-------------------------------------
Router: NETGEAR WNDR4300
The same configuration works well on linux 3.10.36.
{{{
kern.notice kernel: [ 0.000000] Linux version 3.10.44
(magicfish1990@mf1990-laptop) (gcc version 4.8.3 (OpenWrt/Linaro GCC
4.8-2014.04 r41336) ) #1 Tue Jul 1 16:26:36 CST 2014
kern.info kernel: [ 0.000000] bootconsole [early0] enabled
kern.info kernel: [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
kern.info kernel: [ 0.000000] SoC: Atheros AR9344 rev 2
kern.info kernel: [ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz,
AHB:200.000MHz, Ref:40.000MHz
kern.info kernel: [ 0.000000] Determined physical RAM map:
kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
kern.info kernel: [ 0.000000] Initrd not found or empty - disabling
initrd
kern.warn kernel: [ 0.000000] Zone ranges:
kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
kern.warn kernel: [ 0.000000] Movable zone start for each node
kern.warn kernel: [ 0.000000] Early memory node ranges
kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat
803b09b0, node_mem_map 81000000
kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT,
4-way, linesize 32 bytes.
kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT,
cache aliases, linesize 32 bytes
kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768
alloc=1*32768
kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility
grouping on. Total pages: 32512
kern.notice kernel: [ 0.000000] Kernel command line: board=WNDR4300
console=ttyS0,115200 mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-
env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
rootfstype=squashfs noinitrd
kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1,
2048 bytes)
kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384
(order: 4, 65536 bytes)
kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192
(order: 3, 32768 bytes)
kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
kern.info kernel: [ 0.000000] Memory: 125612k/131072k available (2542k
kernel code, 5460k reserved, 943k data, 224k init, 0k highmem)
kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3,
MinObjects=0, CPUs=1, Nodes=1
kern.info kernel: [ 0.000000] NR_IRQS:51
kern.info kernel: [ 0.060000] Calibrating delay loop... 278.93 BogoMIPS
(lpj=1394688)
kern.info kernel: [ 0.070000] pid_max: default: 32768 minimum: 301
kern.info kernel: [ 0.070000] Mount-cache hash table entries: 512
kern.info kernel: [ 0.080000] NET: Registered protocol family 16
kern.info kernel: [ 0.080000] MIPS: machine is NETGEAR
WNDR3700v4/WNDR4300
kern.debug kernel: [ 0.090000] ar71xx: using random MAC address for
eth0
kern.warn kernel: [ 0.290000] registering PCI controller with
io_map_base unset
kern.info kernel: [ 0.300000] bio: create slab <bio-0> at 0
kern.info kernel: [ 0.310000] PCI host bridge to bus 0000:00
kern.info kernel: [ 0.310000] pci_bus 0000:00: root bus resource [mem
0x10000000-0x13ffffff]
kern.info kernel: [ 0.320000] pci_bus 0000:00: root bus resource [io
0x0000]
kern.info kernel: [ 0.320000] pci_bus 0000:00: No busn resource found
for root bus, will use [bus 00-ff]
kern.debug kernel: [ 0.330000] pci 0000:00:00.0: [168c:0033] type 00
class 0x028000
kern.err kernel: [ 0.330000] pci 0000:00:00.0: invalid calibration data
kern.debug kernel: [ 0.330000] pci 0000:00:00.0: reg 10: [mem
0x00000000-0x0001ffff 64bit]
kern.debug kernel: [ 0.330000] pci 0000:00:00.0: reg 30: [mem
0x00000000-0x0000ffff pref]
kern.debug kernel: [ 0.330000] pci 0000:00:00.0: supports D1
kern.debug kernel: [ 0.330000] pci 0000:00:00.0: PME# supported from D0
D1 D3hot
kern.debug kernel: [ 0.330000] pci_bus 0000:00: busn_res: [bus 00-ff]
end is updated to 00
kern.info kernel: [ 0.330000] pci 0000:00:00.0: BAR 0: assigned [mem
0x10000000-0x1001ffff 64bit]
kern.info kernel: [ 0.340000] pci 0000:00:00.0: BAR 6: assigned [mem
0x10020000-0x1002ffff pref]
kern.info kernel: [ 0.340000] pci 0000:00:00.0: using irq 40 for pin 1
kern.info kernel: [ 0.350000] Switching to clocksource MIPS
kern.info kernel: [ 0.350000] NET: Registered protocol family 2
kern.info kernel: [ 0.360000] TCP established hash table entries: 1024
(order: 1, 8192 bytes)
kern.info kernel: [ 0.360000] TCP bind hash table entries: 1024 (order:
0, 4096 bytes)
kern.info kernel: [ 0.370000] TCP: Hash tables configured (established
1024 bind 1024)
kern.info kernel: [ 0.370000] TCP: reno registered
kern.info kernel: [ 0.370000] UDP hash table entries: 256 (order: 0,
4096 bytes)
kern.info kernel: [ 0.380000] UDP-Lite hash table entries: 256 (order:
0, 4096 bytes)
kern.info kernel: [ 0.390000] NET: Registered protocol family 1
kern.debug kernel: [ 0.390000] PCI: CLS 0 bytes, default 32
kern.info kernel: [ 0.410000] squashfs: version 4.0 (2009/01/31)
Phillip Lougher
kern.info kernel: [ 0.410000] jffs2: version 2.2 (NAND) (SUMMARY)
(LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
kern.info kernel: [ 0.420000] msgmni has been set to 245
kern.info kernel: [ 0.430000] io scheduler noop registered
kern.info kernel: [ 0.430000] io scheduler deadline registered
(default)
kern.info kernel: [ 0.440000] Serial: 8250/16550 driver, 1 ports, IRQ
sharing disabled
kern.info kernel: [ 0.460000] serial8250.0: ttyS0 at MMIO 0x18020000
(irq = 11) is a 16550A
kern.info kernel: [ 0.470000] console [ttyS0] enabled, bootconsole
disabled
kern.info kernel: [ 0.480000] NAND device: Manufacturer ID: 0x2c, Chip
ID: 0xf1 (Micron NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB
size: 64
kern.info kernel: [ 0.500000] Scanning device for bad blocks
kern.notice kernel: [ 0.580000] 12 cmdlinepart partitions found on MTD
device ar934x-nfc
kern.notice kernel: [ 0.590000] Creating 12 MTD partitions on "ar934x-
nfc":
kern.notice kernel: [ 0.600000] 0x000000000000-0x000000040000 :
"u-boot"
kern.notice kernel: [ 0.600000] 0x000000040000-0x000000080000 : "u
-boot-env"
kern.notice kernel: [ 0.610000] 0x000000080000-0x0000000c0000 :
"caldata"
kern.notice kernel: [ 0.620000] 0x0000000c0000-0x000000140000 : "pot"
kern.notice kernel: [ 0.620000] 0x000000140000-0x000000340000 :
"language"
kern.notice kernel: [ 0.630000] 0x000000340000-0x0000003c0000 :
"config"
kern.notice kernel: [ 0.640000] 0x0000003c0000-0x0000006c0000 :
"traffic_meter"
kern.notice kernel: [ 0.640000] 0x0000006c0000-0x0000008c0000 :
"kernel"
kern.notice kernel: [ 0.650000] 0x0000008c0000-0x000001fc0000 : "ubi"
kern.notice kernel: [ 0.660000] 0x0000006c0000-0x000001fc0000 :
"firmware"
kern.notice kernel: [ 0.900000] 0x000001fc0000-0x000002000000 :
"caldata_backup"
kern.notice kernel: [ 0.910000] 0x000002000000-0x000008000000 :
"reserved"
kern.info kernel: [ 0.940000] switch0: Atheros AR8327 rev. 4 switch
registered on ag71xx-mdio.0
kern.info kernel: [ 2.140000] libphy: ag71xx_mdio: probed
kern.info kernel: [ 2.700000] ag71xx ag71xx.0: connected to PHY at
ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
kern.info kernel: [ 2.710000] eth0: Atheros AG71xx at 0xb9000000, irq
4, mode:RGMII
kern.info kernel: [ 2.720000] TCP: cubic registered
kern.info kernel: [ 2.720000] NET: Registered protocol family 17
kern.info kernel: [ 2.730000] 8021q: 802.1Q VLAN Support v1.8
kern.notice kernel: [ 2.730000] UBI: auto-attach mtd8
kern.notice kernel: [ 2.740000] UBI: attaching mtd8 to ubi0
kern.notice kernel: [ 3.000000] UBI: scanning is finished
kern.notice kernel: [ 3.030000] UBI: attached mtd8 (name "ubi", size 23
MiB) to ubi0
kern.notice kernel: [ 3.030000] UBI: PEB size: 131072 bytes (128 KiB),
LEB size: 126976 bytes
kern.notice kernel: [ 3.040000] UBI: min./max. I/O unit sizes:
2048/2048, sub-page size 2048
kern.notice kernel: [ 3.040000] UBI: VID header offset: 2048 (aligned
2048), data offset: 4096
kern.notice kernel: [ 3.050000] UBI: good PEBs: 184, bad PEBs: 0,
corrupted PEBs: 0
kern.notice kernel: [ 3.060000] UBI: user volume: 2, internal volumes:
1, max. volumes count: 128
kern.notice kernel: [ 3.070000] UBI: max/mean erase counter: 7/5, WL
threshold: 4096, image sequence number: 1044690537
kern.notice kernel: [ 3.070000] UBI: available PEBs: 0, total reserved
PEBs: 184, PEBs reserved for bad PEB handling: 20
kern.notice kernel: [ 3.080000] UBI: background thread "ubi_bgt0d"
started, PID 283
kern.notice kernel: [ 3.090000] UBI: ubiblock0_0 created from
ubi0:0(rootfs)
kern.notice kernel: [ 3.100000] ubiblock: device ubiblock0_0 (rootfs)
set to be root filesystem
kern.info kernel: [ 3.110000] VFS: Mounted root (squashfs filesystem)
readonly on device 254:0.
kern.info kernel: [ 3.120000] Freeing unused kernel memory: 224K
(803c8000 - 80400000)
kern.info kernel: [ 6.710000] eth0: link up (1000Mbps/Full duplex)
kern.err kernel: [ 8.140000] end_request: I/O error, dev mtdblock0,
sector 16
kern.err kernel: [ 8.140000] Buffer I/O error on device mtdblock0,
logical block 2
kern.notice kernel: [ 8.400000] UBIFS: background thread "ubifs_bgt0_1"
started, PID 333
kern.notice kernel: [ 8.630000] UBIFS: mounted UBI device 0, volume 1,
name "rootfs_data"
kern.notice kernel: [ 8.640000] UBIFS: LEB size: 126976 bytes (124
KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
kern.notice kernel: [ 8.650000] UBIFS: FS size: 11173888 bytes (10 MiB,
88 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
kern.notice kernel: [ 8.660000] UBIFS: reserved for root: 527769 bytes
(515 KiB)
kern.notice kernel: [ 8.660000] UBIFS: media format: w4/r0 (latest is
w4/r0), UUID 8831FF61-FC59-42B8-82B8-42D8D2F972C1, small LPT model
kern.info kernel: [ 8.690000] eth0: link down
user.emerg syslog: Error: Failed to connect to ubus
user.emerg syslog: this file has been obseleted. please call "/sbin/block
mount" directly
kern.err kernel: [ 15.750000] end_request: I/O error, dev mtdblock0,
sector 16
kern.err kernel: [ 15.750000] Buffer I/O error on device mtdblock0,
logical block 2
daemon.err odhcpd[755]: Failed to open routing table: No such file or
directory
daemon.err odhcpd[755]: Unable to open raw socket: Address family not
supported by protocol
user.emerg syslog: uinteger - 8 = true
cron.info crond[791]: crond: crond (busybox 1.22.1) started, log level 8
user.emerg syslog: iptables v1.4.21: can't initialize iptables table
`mangle': Table does not exist (do you need to insmod?)
user.emerg syslog: Perhaps iptables or your kernel needs to be upgraded.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: can't initialize iptables table
`mangle': Table does not exist (do you need to insmod?)
user.emerg syslog: Perhaps iptables or your kernel needs to be upgraded.
user.emerg syslog: iptables v1.4.21: can't initialize iptables table
`mangle': Table does not exist (do you need to insmod?)
user.emerg syslog: Perhaps iptables or your kernel needs to be upgraded.
user.emerg syslog: iptables v1.4.21: can't initialize iptables table
`mangle': Table does not exist (do you need to insmod?)
user.emerg syslog: Perhaps iptables or your kernel needs to be upgraded.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
daemon.notice netifd: Interface 'lan' is enabled
daemon.notice netifd: Interface 'lan' is setting up now
kern.info kernel: [ 20.340000] device eth0.1 entered promiscuous mode
kern.info kernel: [ 20.340000] device eth0 entered promiscuous mode
daemon.notice netifd: Interface 'lan' is now up
daemon.notice netifd: Interface 'loopback' is enabled
daemon.notice netifd: Interface 'wan' is enabled
daemon.notice netifd: Network device 'lo' link is up
daemon.notice netifd: Interface 'loopback' has link connectivity
daemon.notice netifd: Interface 'loopback' is setting up now
daemon.notice netifd: Interface 'loopback' is now up
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
daemon.err odhcpd[939]: Failed to open routing table: No such file or
directory
daemon.err odhcpd[939]: Unable to open raw socket: Address family not
supported by protocol
user.emerg syslog: iptables v1.4.21: MARK: bad value for option "--set-
mark", or out of range (0-4294967295).
user.emerg syslog:
user.emerg syslog: Try `iptables -h' or 'iptables --help' for more
information.
daemon.notice netifd: radio1 (917): Could not find PHY for device 'radio1'
daemon.notice netifd: radio0 (916): Could not find PHY for device 'radio0'
daemon.notice netifd: radio1 (963): WARNING: Variable 'data' does not
exist or is not an array/object
daemon.notice netifd: radio0 (962): WARNING: Variable 'data' does not
exist or is not an array/object
daemon.notice netifd: Network device 'eth0' link is up
daemon.notice netifd: VLAN 'eth0.2' link is up
daemon.notice netifd: Interface 'wan' has link connectivity
daemon.notice netifd: Interface 'wan' is setting up now
daemon.notice netifd: VLAN 'eth0.1' link is up
kern.info kernel: [ 21.880000] eth0: link up (1000Mbps/Full duplex)
kern.info kernel: [ 21.880000] br-lan: port 1(eth0.1) entered forwarding
state
kern.info kernel: [ 21.880000] br-lan: port 1(eth0.1) entered forwarding
state
daemon.notice netifd: Bridge 'br-lan' link is up
daemon.notice netifd: Interface 'lan' has link connectivity
user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
daemon.info pppd[1042]: Plugin rp-pppoe.so loaded.
daemon.info pppd[1042]: RP-PPPoE plugin version 3.8p compiled against pppd
2.4.6
daemon.err pppd[1042]: Couldn't open the /dev/ppp device: No such file or
directory
daemon.notice netifd: wan (1042): /usr/sbin/pppd: You need to create the
/dev/ppp device node by
daemon.notice netifd: wan (1042): executing the following command as root:
daemon.notice netifd: wan (1042): mknod /dev/ppp c 108 0
daemon.notice netifd: wan (1042):
daemon.err pppd[1042]: You need to create the /dev/ppp device node by
executing the following command as root:
mknod /dev/ppp c 108 0
cron.info crond[791]: crond: USER root pid 1066 cmd /usr/bin/ddns.sh
daemon.notice netifd: Interface 'wan' is now down
daemon.notice netifd: Interface 'wan' is disabled
daemon.notice netifd: Interface 'wan' is enabled
daemon.notice netifd: Interface 'wan' is setting up now
daemon.notice netifd: VLAN 'eth0.2' link is down
daemon.notice netifd: Interface 'wan' has link connectivity loss
daemon.notice netifd: VLAN 'eth0.2' link is up
daemon.notice netifd: Interface 'wan' has link connectivity
kern.info kernel: [ 23.880000] br-lan: port 1(eth0.1) entered forwarding
state
daemon.info pppd[1127]: Plugin rp-pppoe.so loaded.
daemon.info pppd[1127]: RP-PPPoE plugin version 3.8p compiled against pppd
2.4.6
daemon.err pppd[1127]: Couldn't open the /dev/ppp device: No such file or
directory
daemon.notice netifd: wan (1127): /usr/sbin/pppd: You need to create the
/dev/ppp device node by
daemon.notice netifd: wan (1127): executing the following command as root:
daemon.notice netifd: wan (1127): mknod /dev/ppp c 108 0
daemon.notice netifd: wan (1127):
daemon.err pppd[1127]: You need to create the /dev/ppp device node by
executing the following command as root:
mknod /dev/ppp c 108 0
daemon.notice netifd: Interface 'wan' is now down
daemon.notice netifd: Interface 'wan' is disabled
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/16948>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
