#15267: Netgear WNR2200: USB powered off (missing gpio pins)
---------------------------+----------------------------------
  Reporter:  sinnerotuh@…  |      Owner:  developers
      Type:  defect        |     Status:  new
  Priority:  normal        |  Milestone:  Chaos Calmer (trunk)
 Component:  kernel        |    Version:  Trunk
Resolution:                |   Keywords:
---------------------------+----------------------------------

Comment (by kyaminskiy@…):

 As proof give the full log:

 [    0.000000] Linux version 3.10.49 (kyaminskiy@firmware-create) (gcc
 version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42554) ) #3 Tue Oct 14
 14:25:21 VLAT 2014
 [    0.000000] MyLoader: sysp=ffffffff, boardp=ffffffff, parts=ffffbfff
 [    0.000000] bootconsole [early0] enabled
 [    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
 [    0.000000] SoC: Atheros AR7241 rev 1
 [    0.000000] Clocks: CPU:360.000MHz, DDR:360.000MHz, AHB:180.000MHz,
 Ref:5.000MHz
 [    0.000000] Determined physical RAM map:
 [    0.000000]  memory: 04000000 @ 00000000 (usable)
 [    0.000000] Initrd not found or empty - disabling initrd
 [    0.000000] Zone ranges:
 [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
 [    0.000000] Movable zone start for each node
 [    0.000000] Early memory node ranges
 [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
 [    0.000000] On node 0 totalpages: 16384
 [    0.000000] free_area_init_node: node 0, pgdat 80312690, node_mem_map
 81000000
 [    0.000000]   Normal zone: 128 pages used for memmap
 [    0.000000]   Normal zone: 0 pages reserved
 [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
 [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32
 bytes.
 [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
 linesize 32 bytes
 [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
 [    0.000000] pcpu-alloc: [0] 0
 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
 Total pages: 16256
 [    0.000000] Kernel command line:  board=WNR2200 console=ttyS0,115200
 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-
 env)ro,7808k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd
 [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
 [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
 bytes)
 [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
 bytes)
 [    0.000000] Writing ErrCtl register=00000000
 [    0.000000] Readback ErrCtl register=00000000
 [    0.000000] Memory: 61208k/65536k available (2253k kernel code, 4328k
 reserved, 596k data, 284k init, 0k highmem)
 [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 [    0.000000] NR_IRQS:51
 [    0.060000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
 [    0.070000] pid_max: default: 32768 minimum: 301
 [    0.070000] Mount-cache hash table entries: 512
 [    0.080000] NET: Registered protocol family 16
 [    0.090000] MIPS: machine is NETGEAR WNR2200
 [    0.490000] registering PCI controller with io_map_base unset
 [    0.540000] bio: create slab <bio-0> at 0
 [    0.540000] PCI host bridge to bus 0000:00
 [    0.550000] pci_bus 0000:00: root bus resource [mem
 0x10000000-0x13ffffff]
 [    0.550000] pci_bus 0000:00: root bus resource [io  0x0000]
 [    0.560000] pci_bus 0000:00: No busn resource found for root bus, will
 use [bus 00-ff]
 [    0.560000] pci 0000:00:00.0: [168c:002e] type 00 class 0x028000
 [    0.560000] pci 0000:00:00.0: fixup device configuration
 [    0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
 [    0.570000] pci 0000:00:00.0: supports D1
 [    0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
 [    0.570000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
 [    0.570000] pci 0000:00:00.0: BAR 0: assigned [mem
 0x10000000-0x1000ffff 64bit]
 [    0.570000] pci 0000:00:00.0: using irq 40 for pin 1
 [    0.580000] Switching to clocksource MIPS
 [    0.590000] NET: Registered protocol family 2
 [    0.590000] TCP established hash table entries: 512 (order: 0, 4096
 bytes)
 [    0.590000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
 [    0.600000] TCP: Hash tables configured (established 512 bind 512)
 [    0.600000] TCP: reno registered
 [    0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 [    0.610000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 [    0.620000] NET: Registered protocol family 1
 [    0.620000] PCI: CLS 0 bytes, default 32
 [    0.650000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 [    0.650000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
 (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 [    0.660000] msgmni has been set to 119
 [    0.670000] io scheduler noop registered
 [    0.670000] io scheduler deadline registered (default)
 [    0.680000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
 [    0.700000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a
 16550A
 [    0.710000] console [ttyS0] enabled, bootconsole disabled
 [    0.720000] ath79-spi ath79-spi: master is unqueued, this is deprecated
 [    0.730000] m25p80 spi0.0: found mx25l12805d, expected m25p80
 [    0.740000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
 [    0.750000] 4 cmdlinepart partitions found on MTD device spi0.0
 [    0.750000] Creating 4 MTD partitions on "spi0.0":
 [    0.760000] 0x000000000000-0x000000040000 : "u-boot"
 [    0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
 [    0.770000] 0x000000050000-0x0000007f0000 : "firmware"
 [    0.780000] 2 netgear-fw partitions found on MTD device firmware
 [    0.780000] 0x000000050000-0x000000156440 : "kernel"
 [    0.790000] mtd: partition "kernel" must either start or end on erase
 block boundary or be smaller than an erase block -- forcing read-only
 [    0.800000] 0x000000156440-0x0000007f0000 : "rootfs"
 [    0.810000] mtd: partition "rootfs" must either start or end on erase
 block boundary or be smaller than an erase block -- forcing read-only
 [    0.820000] mtd: device 4 (rootfs) set to be root filesystem
 [    0.830000] 1 squashfs-split partitions found on MTD device rootfs
 [    0.840000] 0x000000690000-0x0000007f0000 : "rootfs_data"
 [    0.840000] 0x0000007f0000-0x000000800000 : "art"
 [    0.870000] libphy: ag71xx_mdio: probed
 [    1.420000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04
 [uid=004dd041, driver=Generic PHY]
 [    1.430000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
 [    1.990000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
 [    3.030000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
 [    3.040000] TCP: cubic registered
 [    3.040000] NET: Registered protocol family 17
 [    3.050000] Bridge firewalling registered
 [    3.050000] 8021q: 802.1Q VLAN Support v1.8
 [    3.060000] VFS: Mounted root (squashfs filesystem) readonly on device
 31:4.
 [    3.070000] Freeing unused kernel memory: 284K (80329000 - 80370000)
 [    7.180000] usbcore: registered new interface driver usbfs
 [    7.190000] usbcore: registered new interface driver hub
 [    7.190000] usbcore: registered new device driver usb
 [    7.250000] SCSI subsystem initialized
 [    7.260000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [    7.270000] ehci-platform: EHCI generic platform driver
 [    7.280000] ehci-platform ehci-platform: EHCI Host Controller
 [    7.280000] ehci-platform ehci-platform: new USB bus registered,
 assigned bus number 1
 [    7.290000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
 [    7.320000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
 [    7.320000] hub 1-0:1.0: USB hub found
 [    7.330000] hub 1-0:1.0: 1 port detected
 [    7.330000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 [    7.350000] usbcore: registered new interface driver usb-storage
 [    7.790000] Loading modules backported from Linux version
 master-2014-05-22-0-gf2032ea
 [    7.790000] Backport generated by backports.git
 backports-20140320-37-g5c33da0
 [    7.940000] cfg80211: Calling CRDA to update world regulatory domain
 [    7.960000] cfg80211: World regulatory domain updated:
 [    7.960000] cfg80211:  DFS Master region: unset
 [    7.960000] cfg80211:   (start_freq - end_freq @ bandwidth),
 (max_antenna_gain, max_eirp), (dfs_cac_time)
 [    7.970000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
 2000 mBm), (N/A)
 [    7.980000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
 2000 mBm), (N/A)
 [    7.990000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
 2000 mBm), (N/A)
 [    8.000000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A,
 2000 mBm), (N/A)
 [    8.010000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A,
 2000 mBm), (0 s)
 [    8.020000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
 2000 mBm), (0 s)
 [    8.020000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
 2000 mBm), (N/A)
 [    8.030000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz),
 (N/A, 0 mBm), (N/A)
 [    8.110000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
 [    8.120000] ath: phy0: eeprom contains invalid mac address:
 ff:ff:ff:ff:ff:ff
 [    8.130000] ath: phy0: random mac address will be used:
 d2:51:b1:c6:a2:39
 [    8.140000] ath: EEPROM regdomain: 0x0
 [    8.140000] ath: EEPROM indicates default country code should be used
 [    8.140000] ath: doing EEPROM country->regdmn map search
 [    8.140000] ath: country maps to regdmn code: 0x3a
 [    8.140000] ath: Country alpha2 being used: US
 [    8.140000] ath: Regpair used: 0x3a
 [    8.150000] ieee80211 phy0: Failed to initialize wep: -2
 [    8.150000] ieee80211 phy0: Selected rate control algorithm
 'minstrel_ht'
 [    8.160000] cfg80211: Calling CRDA for country: US
 [    8.170000] cfg80211: Regulatory domain changed to country: US
 [    8.170000] cfg80211:  DFS Master region: FCC
 [    8.180000] cfg80211:   (start_freq - end_freq @ bandwidth),
 (max_antenna_gain, max_eirp), (dfs_cac_time)
 [    8.190000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
 3000 mBm), (N/A)
 [    8.190000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
 1700 mBm), (N/A)
 [    8.200000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A,
 2300 mBm), (0 s)
 [    8.210000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
 3000 mBm), (N/A)
 [    8.220000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz),
 (N/A, 4000 mBm), (N/A)
 [    8.230000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
 [    8.540000] usb 1-1: new high-speed USB device number 2 using ehci-
 platform
 [    8.770000] usb-storage 1-1:1.0: USB Mass Storage device detected
 [    8.770000] scsi0 : usb-storage 1-1:1.0
 [    9.780000] scsi 0:0:0:0: Direct-Access     JetFlash Transcend 4GB
 8.07 PQ: 0 ANSI: 2
 [    9.790000] sd 0:0:0:0: [sda] 7843840 512-byte logical blocks: (4.01
 GB/3.74 GiB)
 [    9.800000] sd 0:0:0:0: [sda] Write Protect is off
 [    9.800000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
 [    9.800000] sd 0:0:0:0: [sda] No Caching mode page found
 [    9.810000] sd 0:0:0:0: [sda] Assuming drive cache: write through
 [    9.820000] sd 0:0:0:0: [sda] No Caching mode page found
 [    9.830000] sd 0:0:0:0: [sda] Assuming drive cache: write through
 [   10.320000]  sda: sda1 sda2
 [   10.330000] sd 0:0:0:0: [sda] No Caching mode page found
 [   10.330000] sd 0:0:0:0: [sda] Assuming drive cache: write through
 [   10.340000] sd 0:0:0:0: [sda] Attached SCSI removable disk
 [   13.220000] jffs2: notice: (371) jffs2_build_xattr_subsystem: complete
 building xattr subsystem, 2 of xdatum (1 unchecked, 1 orphan) and 36 of
 xref (0 dead, 20 orphan) found.
 [   13.250000] EXT4-fs (sda2): mounting ext3 file system using the ext4
 subsystem
 [   15.570000] EXT4-fs (sda2): recovery complete
 [   15.570000] EXT4-fs (sda2): mounted filesystem with ordered data mode.
 Opts:
 [   18.040000] Adding 131068k swap on /dev/sda1.  Priority:-1 extents:1
 across:131068k
 [   19.260000] NET: Registered protocol family 8
 [   19.260000] NET: Registered protocol family 20
 [   19.270000] tun: Universal TUN/TAP device driver, 1.6
 [   19.280000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
 [   19.290000] l2tp_core: L2TP core driver, V2.0
 [   19.300000] l2tp_netlink: L2TP netlink interface
 [   19.310000] gre: GRE over IPv4 demultiplexor driver
 [   19.320000] ip_gre: GRE over IPv4 tunneling driver
 [   19.340000] PPP generic driver version 2.4.2
 [   19.380000] u32 classifier
 [   19.390000]     input device check on
 [   19.390000]     Actions configured
 [   19.400000] Mirror/redirect action on
 [   19.440000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)
 [   19.470000] usbcore: registered new interface driver cdc_acm
 [   19.480000] cdc_acm: USB Abstract Control Model driver for USB modems
 and ISDN adapters
 [   19.540000] PPP MPPE Compression module registered
 [   19.560000] NET: Registered protocol family 24
 [   19.560000] PPTP driver version 0.8.5
 [   19.600000] usbcore: registered new interface driver ums-alauda
 [   19.620000] usbcore: registered new interface driver ums-cypress
 [   19.640000] usbcore: registered new interface driver ums-datafab
 [   19.650000] usbcore: registered new interface driver ums-freecom
 [   19.660000] usbcore: registered new interface driver ums-isd200
 [   19.680000] usbcore: registered new interface driver ums-jumpshot
 [   19.680000] usbcore: registered new interface driver ums-karma
 [   19.700000] usbcore: registered new interface driver ums-sddr09
 [   19.720000] usbcore: registered new interface driver ums-sddr55
 [   19.740000] usbcore: registered new interface driver ums-usbat
 [   19.760000] usbcore: registered new interface driver usbserial
 [   19.760000] usbcore: registered new interface driver usbserial_generic
 [   19.780000] usbserial: USB Serial support registered for generic
 [   19.890000] xt_time: kernel timezone is -0000
 [   19.910000] usbcore: registered new interface driver ark3116
 [   19.910000] usbserial: USB Serial support registered for ark3116
 [   19.940000] usbcore: registered new interface driver belkin_sa
 [   19.940000] usbserial: USB Serial support registered for Belkin /
 Peracom / GoHubs USB Serial Adapter
 [   19.960000] usbcore: registered new interface driver ch341
 [   19.960000] usbserial: USB Serial support registered for ch341-uart
 [   19.980000] usbcore: registered new interface driver cp210x
 [   19.980000] usbserial: USB Serial support registered for cp210x
 [   19.990000] usbcore: registered new interface driver cypress_m8
 [   20.010000] usbserial: USB Serial support registered for DeLorme
 Earthmate USB
 [   20.010000] usbserial: USB Serial support registered for HID->COM RS232
 Adapter
 [   20.030000] usbserial: USB Serial support registered for Nokia CA-42 V2
 Adapter
 [   20.090000] Ebtables v2.0 registered
 [   20.090000] usbcore: registered new interface driver ftdi_sio
 [   20.110000] usbserial: USB Serial support registered for FTDI USB
 Serial Device
 [   20.120000] ip_tables: (C) 2000-2006 Netfilter Core Team
 [   20.160000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
 [   20.190000] usbcore: registered new interface driver ipw
 [   20.200000] usbserial: USB Serial support registered for IPWireless
 converter
 [   20.210000] usbcore: registered new interface driver option
 [   20.220000] usbserial: USB Serial support registered for GSM modem
 (1-port)
 [   35.330000] device eth1 entered promiscuous mode
 [   37.020000] cfg80211: Calling CRDA for country: RU
 [   37.030000] cfg80211: Regulatory domain changed to country: RU
 [   37.030000] cfg80211:  DFS Master region: ETSI
 [   37.040000] cfg80211:   (start_freq - end_freq @ bandwidth),
 (max_antenna_gain, max_eirp), (dfs_cac_time)
 [   37.050000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
 2000 mBm), (N/A)
 [   37.050000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
 2000 mBm), (N/A)
 [   37.060000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A,
 2000 mBm), (0 s)
 [   37.070000] cfg80211:   (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A,
 3000 mBm), (0 s)
 [   37.080000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
 3000 mBm), (N/A)
 [   37.690000] eth0: link up (100Mbps/Full duplex)
 [   40.930000] device wlan0 entered promiscuous mode
 [   47.120000] device tap0 entered promiscuous mode
 [   47.130000] br-lan: port 3(tap0) entered forwarding state
 [   47.130000] br-lan: port 3(tap0) entered forwarding state
 [   48.340000] br-lan: port 2(wlan0) entered forwarding state
 [   48.350000] br-lan: port 2(wlan0) entered forwarding state
 [   49.130000] br-lan: port 3(tap0) entered forwarding state
 [   50.350000] br-lan: port 2(wlan0) entered forwarding state

--
Ticket URL: <https://dev.openwrt.org/ticket/15267#comment:17>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to