#18149: Unifi reboot command failing with LED enabled
--------------------------+-----------------------------------
Reporter: webtron | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker 14.07
Component: base system | Version: Trunk
Resolution: | Keywords: unifi reboot
--------------------------+-----------------------------------
Comment (by Shogo):
I'm not the only one. Finally, sorry that is happening, but I'm happy also
:)
The issue is something in the middle.
U-boot, or at least that Unifi U-boot fails to relocate to RAM when it's
initialized.
It's definitely a mix of hardware with software.
This does not happen with the original Ubiquiti firmware.
You LED remark is quite good, did you try putting the box in a reboot loop
every 20 seconds with the LED off? Will try that myself.
My workaround was that I changed the U-boot with the airrouter version,
which in the last version they added a watchdog in case the u-boot fails
to relocate.
It still happens, but it will reset the CPU after 10 seconds.
The downside of that is that I lost the rescue functionality by hardware
pressing which is annoying.
--
Ticket URL: <https://dev.openwrt.org/ticket/18149#comment:1>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
