#18616: NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out -----------------------+---------------------------------- Reporter: openwrt@… | Owner: developers Type: defect | Status: new Priority: normal | Milestone: Chaos Calmer (trunk) Component: kernel | Version: Trunk Keywords: | -----------------------+---------------------------------- Hi,
Since '''kernel 3.14''' is used in ar71xx I get this error with a NanoBeam M5 16 (hardware-compatible with NanoStation Loco M5 XW) when the device boots with the Ethernet cable connected: {{{ [ 44.050000] ------------[ cut here ]------------ [ 44.050000] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x1e8/0x26c() [ 44.060000] NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out [ 44.070000] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_nat_irc nf_nat_ftp nf_nat nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_irc nf_conntrack_ftp nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_REJECT ip_tables crc_ccitt compat ip6t_REJECT ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ipv6 arc4 crypto_blkcipher ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common [ 44.130000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.26 #1 [ 44.140000] Stack : 00000006 00000000 00000000 00000000 00000000 00000000 803ac8ce 00000032 [ 44.140000] 80341408 00000005 802f70f4 8034182f 00000000 803a3b5c 80341408 00000005 [ 44.140000] 803ac244 00000001 00000004 8029a1d0 00000003 801ff138 00000108 00000005 [ 44.140000] 802fa2b8 80331c74 00000000 00000000 00000000 00000000 00000000 00000000 [ 44.140000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 44.140000] ... [ 44.170000] Call Trace: [ 44.180000] [<80241100>] show_stack+0x48/0x70 [ 44.180000] [<802aa790>] warn_slowpath_common+0x84/0xb4 [ 44.190000] [<802aa7ec>] warn_slowpath_fmt+0x2c/0x38 [ 44.190000] [<8011102c>] dev_watchdog+0x1e8/0x26c [ 44.200000] [<800ee5f8>] call_timer_fn.isra.38+0x24/0x84 [ 44.200000] [<8022a250>] run_timer_softirq+0x17c/0x1bc [ 44.210000] [<8008f5c8>] __do_softirq+0xf8/0x228 [ 44.210000] [<801864f0>] irq_exit+0x54/0x70 [ 44.210000] [<80060830>] ret_from_irq+0x0/0x4 [ 44.220000] [<80210584>] r4k_wait_irqoff+0x18/0x1c [ 44.220000] [<80100584>] cpu_startup_entry+0xa4/0x104 [ 44.230000] [<8034e94c>] start_kernel+0x3c8/0x3e0 [ 44.230000] [ 44.240000] ---[ end trace 2b19aa29f924c27c ]--- }}} After that, there is no link on the Ethernet port anymore. However, if I boot the device without the Ethernet cable connected and plug it later, the Ethernet port works perfectly and the error does not appear at all. -- Ticket URL: <https://dev.openwrt.org/ticket/18616> OpenWrt <http://openwrt.org> Opensource Wireless Router Technology _______________________________________________ openwrt-tickets mailing list openwrt-tickets@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets