#18736: Problem with booting openwrt image for adm8668
-------------------------+------------------------
 Reporter:  moguai_xl@…  |      Owner:  developers
     Type:  defect       |     Status:  new
 Priority:  normal       |  Milestone:
Component:  kernel       |    Version:  Trunk
 Keywords:               |
-------------------------+------------------------
 Hi,

 I have a problem with openwrt image for adm8668 architecture downloaded
 from https://downloads.openwrt.org/snapshots/trunk/adm8668/openwrt-
 adm8668-squashfs.bin.


 {{{
 openwrt-adm8668-squashfs.bin                       11-Jan-2015 07:25
 3211264
 }}}

 After successful installation system won't boot. The same situation occurs
 where I try to build my own image. I see the same message. I attach full
 boot log.

 {{{
 07f?4

 (v1.00.02) U-Boot 2.1.4 (Jan 28 2008 - 14:56:42)

 DRAM:  64 MB
 Flash:  8 MB
 In:    serial
 Out:   serial
 Err:   serial
 Net:   adm8668_net
 Hit any key to stop autoboot:  0
 TX error status2 = 0x04000008
 Using adm8668_net device
 host 192.168.0.250 is alive
 TX error status2 = 0x04000008
 Using adm8668_net device
 TFTP from server 192.168.0.250; our IP address is 192.168.0.10
 Filename 'vmlinuz-8668'.
 Load address: 0x600000
 Loading: T T
 #################################################################
          #################################################################
          #################################################################
          #################################################################
          #################################################################
          #################################################################
          #################################################################
          #################################################################
          #################################################################
          ###########################################
 done
 Bytes transferred = 3211264 (310000 hex)

 ..................... done
 Erased 49 sectors
 Copy to Flash... done
 ## Booting image at b0040000 ...
 Check vendor string...    Image Name:   ADM8668 Linux Kernel(2.4.31)
    Created:      2015-01-11   7:25:58 UTC
    Image Type:   MIPS Linux Kernel Image (uncompressed)
    Data Size:    3211200 Bytes =  3.1 MB
    Load Address: 80400000
    Entry Point:  80400000
    Verifying Checksum ... OK
 OK

 Starting kernel ...


 LZMA kernel loader
 lzma data @ 0x804001d0 - 0x805284f9
 load addr @ 0x80002000

 jump table @ 0x83ff5340

 Decompressing kernel...success!
 [    0.000000] Linux version 3.14.27 (openwrt@gb-16) (gcc version 4.8.3
 (OpenWrt/Linaro GCC 4.8-2014.04 r43912) ) #1 Sun Jan 11 07:25:42 UTC 2015
 [    0.000000] Board info:
 [    0.000000]   RAM size: 64 MB
 [    0.000000]   NOR start: 0xb0000000
 [    0.000000]   NOR size: 0x800000
 [    0.000000] bootconsole [early0] enabled
 [    0.000000] CPU0 revision is: 0001800b (MIPS 4Kc)
 [    0.000000] Determined physical RAM map:
 [    0.000000]  memory: 04000000 @ 00000000 (usable)
 [    0.000000] Initrd not found or empty - disabling initrd
 [    0.000000] Zone ranges:
 [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
 [    0.000000] Movable zone start for each node
 [    0.000000] Early memory node ranges
 [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
 [    0.000000] Primary instruction cache 8kB, VIPT, 2-way, linesize 16
 bytes.
 [    0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize
 16 bytes
 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
 Total pages: 16256
 [    0.000000] Kernel command line: console=ttyS0 earlyprintk
 [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
 [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
 bytes)
 [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
 bytes)
 [    0.000000] Memory: 61268K/65536K available (2722K kernel code, 87K
 rwdata, 476K rodata, 156K init, 184K bss, 4268K reserved)
 [    0.000000] NR_IRQS:32
 [    0.000000] ADM8668 CPU clock: 200 MHz
 [    0.000000] Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
 [    0.070000] pid_max: default: 32768 minimum: 301
 [    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 [    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
 bytes)
 [    0.100000] NET: Registered protocol family 16
 [    0.120000] ------------[ cut here ]------------
 [    0.120000] WARNING: CPU: 0 PID: 1 at drivers/amba/bus.c:296
 amba_device_add+0x64/0x248()
 [    0.130000] Modules linked in:
 [    0.130000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.27 #1
 [    0.130000] Stack : 00000006 00000000 00000000 00000000 00000000
 00000000 8038bdde 00000032
           8038bdde 80339224 802eaaa0 80330917 00000001 803839e0 8381fbe0
 80339224
           80350db4 80390000 0000001e 80285790 00000003 801d8560 00000128
 00000000
           802edc84 83823d5c 00000000 00000000 00000000 00000000 00000000
 00000000
           00000000 00000000 00000000 00000000 00000000 00000000 00000000
 00000000
           ...
 [    0.170000] Call Trace:
 [    0.170000] [<8021c6e0>] show_stack+0x48/0x70
 [    0.170000] [<80298538>] warn_slowpath_common+0x84/0xb4
 [    0.180000] [<802985f0>] warn_slowpath_null+0x18/0x24
 [    0.180000] [<80071574>] amba_device_add+0x64/0x248
 [    0.180000] [<8033b840>] adm8668_devs_register+0x1c/0xcc
 [    0.190000] [<800e7260>] do_one_initcall+0xf0/0x1ac
 [    0.190000] [<80339ae8>] kernel_init_freeable+0x144/0x20c
 [    0.190000] [<800066fc>] kernel_init+0x10/0x114
 [    0.200000] [<800020a8>] ret_from_kernel_thread+0x14/0x1c
 [    0.200000]
 [    0.200000] ---[ end trace 3cbb3ae922f711c1 ]---
 [    0.210000] ADM8668: applied USB workaround
 [    0.270000] bio: create slab <bio-0> at 0
 [    0.280000] PCI host bridge to bus 0000:00
 [    0.280000] pci_bus 0000:00: root bus resource [mem
 0x16000000-0x1dffffff]
 [    0.290000] pci_bus 0000:00: root bus resource [io
 0x12600000-0x127fffff]
 [    0.290000] pci_bus 0000:00: No busn resource found for root bus, will
 use [bus 00-ff]
 [    0.300000] PCI: fixing up ADM8668 controller
 [    0.310000] pci 0000:00:01.0: BAR 0: assigned [mem
 0x16000000-0x16007fff]
 [    0.320000] Switched to clocksource MIPS
 [    0.340000] NET: Registered protocol family 2
 [    0.350000] TCP established hash table entries: 1024 (order: 0, 4096
 bytes)
 [    0.360000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 [    0.360000] TCP: Hash tables configured (established 1024 bind 1024)
 [    0.370000] TCP: reno registered
 [    0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 [    0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 [    0.380000] NET: Registered protocol family 1
 [    0.400000] futex hash table entries: 256 (order: -1, 3072 bytes)
 [    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 [    0.410000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
 (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 [    0.430000] msgmni has been set to 119
 [    0.430000] io scheduler noop registered
 [    0.430000] io scheduler deadline registered (default)
 [    0.440000] Serial: AMBA driver
 [    0.440000] apb:uart0: ttyS0 at MMIO 0x1e400000 (irq = 6, base_baud =
 0J́a AMBA
 [    0.450000] console [ttyS0] enabled
 [    0.450000] console [ttyS0] enabled
 [    0.460000] bootconsole [early0] disabled
 [    0.460000] bootconsole [early0] disabled
 [    0.480000] adm8668-nor: Found 1 x16 devices at 0x0 in 16-bit bank.
 Manufacturer ID 0x0000c2 Chip ID 0x0022cb
 [    0.490000] Amd/Fujitsu Extended Query Table at 0x0040
 [    0.490000]   Amd/Fujitsu Extended Query version 1.1.
 [    0.500000] number of CFI chips: 1
 [    0.500000] adm8668-nor: Couldn't find root filesystem
 [    0.510000] Creating 3 MTD partitions on "adm8668-nor":
 [    0.520000] 0x000000040000-0x000000800000 : "linux"
 [    0.540000] 0x0000000e0000-0x000000220000 : "rootfs"
 [    0.550000] mtd: device 1 (rootfs) set to be root filesystem
 [    0.560000] mtdsplit: no squashfs found in "rootfs"
 [    0.560000] mtdsplit: no squashfs found in "adm8668-nor"
 [    0.570000] 0x000000020000-0x000000040000 : "uboot_env"
 [    0.590000] net eth0: tulip_platform (Infineon ADM8668) at MMIO
 0x11a00000 00:21:29:f0:a1:c3, IRQ 7
 [    0.610000] net eth1: tulip_platform (Infineon ADM8668) at MMIO
 0x11600000 00:21:29:f0:a1:c4, IRQ 8
 [    0.620000] TCP: cubic registered
 [    0.620000] NET: Registered protocol family 17
 [    0.630000] Bridge firewalling registered
 [    0.630000] 8021q: 802.1Q VLAN Support v1.8
 [    0.650000] List of all partitions:
 [    0.660000] 1f00            7936 mtdblock0  (driver?)
 [    0.660000] 1f01            1280 mtdblock1  (driver?)
 [    0.670000] 1f02             128 mtdblock2  (driver?)
 [    0.670000] No filesystem could mount root, tried:  squashfs
 [    0.680000] Kernel panic - not syncing: VFS: Unable to mount root fs on
 unknown-block(31,1)
 }}}

 Regards,

--
Ticket URL: <https://dev.openwrt.org/ticket/18736>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to