#14148: Custom MTU for PPPoE connection is set for Ethernet adapter too
--------------------------+-----------------------------------
Reporter: alexatkinuk | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker 14.07
Component: packages | Version: Trunk
Resolution: | Keywords: pppoe mtu
--------------------------+-----------------------------------
Comment (by anonymous):
this might be of use
https://web.archive.org/web/20131029215600/http://www.sinet.bt.com/498v5p1.pdf
"CPs should also be aware of the following:
Where Openreach has provided and is managing the modem, daily status
reports will be generated and ransmitted consisting of no more than 8k
bytes (64k bits) of data upstream at full line rate. These flows will
take priority over EU data. The impact clearly depends on the VDSL2
traffic rate at the time "
and this http://wiki.aa.org.uk/FTTC_Modem
MTU = 1500 (if your equipment can handle baby jumbo frames and RFC 4638),
otherwise 1492
openwrt profile vg3505j are in this class of devices and to get maximum
throughput i would guess is needed ? CPE with an integrated VDSL2 modem
(up to profile 30a)
http://monki.org.uk/blog/2013/04/14/patching-openwrt-for-bt-fttc/
--
Ticket URL: <https://dev.openwrt.org/ticket/14148#comment:4>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
