#19301: Not able update ath10k firmware on openwrt image!!
-----------------------------+----------------------------------
Reporter: uddandibharath7 | Owner: developers
Type: defect | Status: new
Priority: highest | Milestone: Chaos Calmer (trunk)
Component: kernel | Version: Trunk
Keywords: ath10k firmware |
-----------------------------+----------------------------------
hi .,
I am using CHAOS CALMER (Gate works Ventana r710, r42297) image on
gateworks 5200 board
Running with linux kernel 3.14.16
I tried updating the ath10k firmware from firmware-2.0 to
firmware-4.bin_10.2.4.48 downloaded from github(/github.com/kvalo/ath10k-
firmware/blob/master/10.2.4/firmware-4.bin_10.2.4.48)
followed the following procedures to update the firmware
1. followed the procedure mentioned in below link
https://dev.openwrt.org/changeset/44656
facing compilation issues with this
2. procedure mentioned in wireless.wiki
https://wireless.wiki.kernel.org/en/users/Drivers/ath10k/firmware#Update_firmware
root@openwrt:cp firmware-4.bin_10.2.4.48
/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
root@openwrt; reboot
firmware is getting failed to load and
Debug logs as follows :=
---------------------
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0
s)
[ 9.630055] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 9.638093] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 9.669140] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem
0x01200000-0x013fffff 64bit]
[ 9.677195] PCI: enabling device 0000:03:00.0 (0140 -> 0142)
[ 9.976997] ath10k: pci irq legacy irq_mode 0 reset_mode 0
[ 10.011541] ath10k: Unknown FW IE: 5
[ 11.118254] ath10k: Unknown eventid: 32768
[ 16.115609] ath10k: wmi service ready event not received
[ 16.635615] ath10k: could not init core (-110)
[ 16.895614] ath10k: could not probe fw (-110)
[ 16.899988] ath10k: failed to register driver core: -110
[ 16.905532] ath10k_pci: probe of 0000:03:00.0 failed with error -110
[ 16.947465] sgtl5000 2-000a: sgtl5000 revision 0x11
[ 16.971195] 2-000a: 1200 mV normal
[ 16.974801] sgtl5000 2-000a: Using internal LDO instead of VDDD
[ 16.992931] imx-sgtl5000 sound.16: sgtl5000 <-> 2028000.ssi mapping ok
[ 17.009481] gsp 0-0029: gsp chip found
[ 17.030363] hidraw: raw HID events driver (C) Jiri Kosina
Does any one tried updating ath10k firmware on openwrt .please help me
thanks
--
Ticket URL: <https://dev.openwrt.org/ticket/19301>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
