#13442: No link on eth1 (wan) if ethernet is connected after boot
----------------------------------------+----------------------------------
Reporter: Robert Grønning <slimg@…> | Owner: developers
Type: defect | Status: reopened
Priority: high | Milestone: Barrier Breaker
Component: kernel | 14.07
Resolution: | Version: Trunk
| Keywords: link boot wan
----------------------------------------+----------------------------------
Changes (by roysjosh@…):
* status: closed => reopened
* resolution: no_response =>
Comment:
I see this on the latest BB, clean build. WRT400N. This leads to dmesg
like:
{{{
[ 667.200000] ar71xx: pll_reg 0xb8050014: 0x1099
[ 667.200000] eth1: link up (100Mbps/Full duplex)
[ 669.200000] eth1: link down
[ 670.200000] ar71xx: pll_reg 0xb8050014: 0x1099
[ 670.200000] eth1: link up (100Mbps/Full duplex)
[ 672.200000] eth1: link down
[ 677.200000] ar71xx: pll_reg 0xb8050014: 0x1099
[ 677.200000] eth1: link up (100Mbps/Full duplex)
[ 679.200000] ar71xx: pll_reg 0xb8050014: 0x991099
[ 679.200000] eth1: link up (10Mbps/Full duplex)
}}}
You can see it tries everything but 1000Mbps...
--
Ticket URL: <https://dev.openwrt.org/ticket/13442#comment:18>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
